• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.1
• /
• pp.25-32
• /
• 2012

Package for artificial satellite is to produce mass production for high package with reliability certification as well as develop SDRAM (synchronous dynamic RAM) module which has such as miniaturization, mass storage, and high reliability in space environment. It requires sophisticated technology with chip stacking or package stacking in order to increase up to 4Gbits or more for mass storage with space technology. To make it better, we should secure suitable processes by doing design, manufacture, and debugging. Pin type PCB substrate was then applied to QFP-Pin type 3D memory package fabrication. These results show that the 3D memory package for artificial satellite scheme is a promising candidate for the realization of our own domestic technologies.

• Journal of Power System Engineering
• /
• v.4 no.3
• /
• pp.55-61
• /
• 2000

In this study, a new design of an one-body type of an unbalanced-fixed- displacement type vane pump combined with an induction type electric motor was suggested. By the application of the new design scheme, it was possible to reduce the number of parts of the pump system and to cut down the volume of power package than that of already-used products. The case in this study enabled efficient heat transfer and electricity insulation of hydraulic fluid. Thus oil moves through the inside of the package for cooling and returns to the reservoir. Because of this design, it was difficult to measure the shaft-input torque. Therefore the package overall efficiency in the paper was evaluated with a ratio of hydraulic power and electric power.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.4
• /
• pp.49-55
• /
• 2016

Nowadays there are magnetic sensors in a wide variety of equipment such as computers, cars, airplanes, medical and industrial instruments. In many of these applications the magnetic sensors offer safe and non-invasive means of detection and are more reliable than other technologies. The electric current in a conductor generates a magnetic field detected by this type of sensor. This work aims to define a package dedicated to an electrical current sensor using a MTJ (Magnetic Tunnel Junction) as a sensing device. Four different proposals of packaging, three variations of the chip on board (CoB) package type and one variation of the thin small outline package (TSOP) were analyzed by COMSOL modeling software by simulating a brad range of current injection. The results obtained from the thermal and magnetic analysis has proven to be very important for package improvements, specially for heat dissipation performance.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.11a
• /
• pp.339-347
• /
• 2005

A type IP-2 transport package should prevent a loss or dispersal of the radioactive contents and a more than $20\%$ increase in the maximum radiation level at any external surface of the package when it were subjected to the drop test under the normal conditions of transport. If a shielding thickness of IP-2 transport package is thick, a bolted lid type may prevent a loss or dispersal of the radioactive contents than the door type of ISO containers which are generally used as a type IP-2 transport package. In this paper, to evaluate the effect of drop directions on the bolt tension and the coherence of a bolt, the drop tests of preliminary small model are tested and evaluated for seven directions before the drop test of a type IP-2 transport package with a bolted lid type under the normal conditions of transport. Seven drop directions which are a bottom-vertical drop, a lid-vortical drop. a horizontal drop and four corner drops have been carried out. Using a force sensor, the bolt tension during the drop impact is measured. The coherence of bolt is evaluated by the difference between the fastening torque of bolt before a drop test and the unfastening torque of bolt after a drop impact.

• The Journal of Industrial Distribution & Business
• /
• v.11 no.1
• /
• pp.29-38
• /
• 2020

Purpose: Understanding which product types of overseas travel (free independent travel vs. package travel) consumers will choose is one of the key issues of marketing and consumer behavior in travel agency management. Prior studies on overseas travel type preferences mainly focused on comparing regional differences (e.g., Asian vs. Westerner, or Korean vs. Australian, or Korean vs. Japanese, or American, French, Italian vs. Japanese) influencing the choice of overseas travel type. Another researchers focused on comparing cultural differences (e.g., individualism vs. collectivism, or individualistic culture vs. collectivistic culture), subcultural difference (e.g., acculturation; Koreans living in Republic of Korea vs. Koreans living in Australia), travel lifestyle, and socio-demographics (e.g., age, gender, income level, education level, marital status, occupation etc.). However, there are few studies that identify individual psychological differences (i.e., individual psychological differences within the same culture) influencing the choice of overseas travel type. Self-construal is a psychological factors that greatly influences choice behavior. The purpose of this study was to examine the role of self-construal as an antecedent variable influencing choice of overseas travel product type. Research design, data and methodology: To achieve the purpose of this study, the questionnaire survey method was used. Self-construal items composed of independent self-construal items and interdependent self-construal items. Product types of overseas travel were free independent travel (FIT) type versus package travel type. In this study, the correlation coefficient between independent self-construal and interdependent self-construal was nonsignificant. It meant that the relationship between independent self-construal and interdependent self-construal was orthogonal. Therefore it was analyzed that independent self-construal and interdependent self-construal separately. Reliability analysis, factor analysis, and logistic regression analysis (controlling gender and age) was used as the data analysis method. Results: According to the results of this study, the stronger independent self-construal, the more preference for the free independent travel type rather than package travel, and the stronger interdependent self-construal, the more preference for the package travel type rather than free independent travel. Conclusions: Self-construal is an antecedent variable influencing the choice of travel type. Travel agencies must consider the consumer's self-construal (independent self-construal vs. interdependent self-construal) before planning and designing overseas travel products.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.2
• /
• pp.193-201
• /
• 2011

Clamp type transferring mechanism for package substrate's wet processes was newly developed instead of conventional roller type transferring mechanism. Clamp type transferring mechanism has the advantages of reducing the panel deflection and of minimizing the contact problem between the panel and the transferring mechanism. Individual clamp of the mechanism has two distinct mechanical functions which are perfectly fixing a panel during the transferring and generating adequate tension for the panel. To determine the mechanical parameters of the clamp, panel deflection simulation was conducted and the result was verified by the panel deflection measurement. Also, fixing angle of a clamp could be determined by the free body force analysis of individual clamp. Finally clamp type transferring mechanism was actually manufactured and the transferring performance was verified during the water spraying condition of the package substrate's wet processes.

• Journal of Information Management
• /
• v.37 no.4
• /
• pp.49-67
• /
• 2006

The purpose of this study is to select factors that its impact on subscription of the package type e-journal in Korea. In order to accomplish this study, factors to select the package-type electronic journal are discussed through preceded research literatures, and presented the factors for subscription of the package-type electronic journal based on KESLI materials. As a result, ten evaluation categories and thirty-four evaluation factors are selected as e-journal evaluation elements.

• Nuclear Engineering and Technology
• /
• v.53 no.5
• /
• pp.1524-1533
• /
• 2021

The structural stability of a waste package is essential for containing radioactive waste for the long term in a repository. A silo-type disposal facility would require more severe verification for the structural integrity, because of radioactive waste packages staked with several tens of meters and overburdens of crushed rocks and shotcretes. In this study, structural safety was analyzed for a silo-type repository, located approximately 100 m below sea level in Gyeongju, Korea. Finite element simulation was performed to investigate the influence of the loads from the backfilling materials and waste package stacks on the mechanical stress of the disposed of wastes and containers. It was identified that the current design of the waste package and the compressive strength criterion for the solidified waste would not be enough to maintain structural stability. Therefore, an enhanced criterion for the compressive strength of the solidified waste and several reinforced structural designs for the disposal concrete container were proposed to prevent failure of the waste package based on the results of parametric studies.

• Transactions of Materials Processing
• /
• v.19 no.8
• /
• pp.474-479
• /
• 2010

Newly suggested hybrid LED package can reduce the number of LED processes and enhance light efficacy in virtue of its integrated optical patterns. Square-type pyramid pattern was chosen for the integrated optical pattern in this study, and it was proved that the pattern enhances illuminance about three times and luminance about two and half times by optical simulation. Square-type pyramid patterns of 0.02mm height and 0.04mm pitch were successively machined on a copper mold which is necessary for imprinting the integrated pattern. Hybrid LED package with integrated optical pattern will be manufactured with ultra-fine machined mold in future study.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.5
• /
• pp.415-420
• /
• 2007

Generally, a diode package consists of the synthetic resin that has good durability but low thermal conductivity. The surface mounted type fast recovery diode was fabricated by using ceramic package. Its main manufacture processes are composed of soldering, sillicon coating and side termination. And it has various advantages that diode is small, easy manufacture and fast cooling. The electric characteristics of the diode such as reverse recovery time, breakdown voltage, forward voltage, and leakage current were 5.28 ns, 1322 V, 1.08 V, $0.45\;{\mu}A$, respectively.