• The Journal of Engineering Geology
• /
• v.32 no.1
• /
• pp.113-126
• /
• 2022

The tectonic history of the Chukchi Abyssal Plain in the Amerasia Basin, Arctic Ocean, has not been fully explored due to the harsh conditions of sea ice preventing detailed observation. Existing models of the tectonic history of the region provide contrasting interpretation of the timing of formation of the crust (Mesozoic to Cenozoic), crust type (from hyper-extended continental crust to oceanic crust), and formation process (from parallel/fan-shaped rifting to transformation faulting). To help determine the age of the oceanic crust, the geothermal gradient was measured at three stations in the south of abyssal plain at depth of 2,160-2,250 m below sea level. Heat flow measurement stations were located perpendicular to the spreading axis over a 40 km-long transect. In-situ thermal conductivity measurement, corrected by the laboratory test, gave observed marine heat flows of 55 to 61 mW/m². All measurements were taken during Arctic expeditions in 2018 (ARA09C expedition) and 2021 (ARA12C expedition) by the Korean ice-breaking research vessel (IBRV) Araon. Given the assumption of oceanic crust, the results correspond to formation in the Late Cretaceous (Mesozoic). The inferred age supports the hypothesis of formation activated by the opening of the Makarov Basin during the Late Mesozoic-Cenozoic. This would make it contemporaneous with rifting of the Chukchi Border Land immediately east of the abyssal plain. The heat flow data indicate the base of the gas hydrate stability zone is located 332-367 m below the seafloor, this will help to identify the gas hydrate-related bottom simulating reflector in the future seismic survey, as already identified on the Chukchi Plateau. Further geophysical surveys, including heat flow measurements, are required to increase our understanding of the formation process and thermal mantle structure of the abyssal plain.

• Analytical Science and Technology
• /
• v.22 no.4
• /
• pp.285-292
• /
• 2009

It has been observed that, after long term storage, some ammunitions are misfired by tamping (combustionstopping) due to aging of the chemicals loaded in the ammunitions. Used in ammunitions are percussion powder which provides the initial energy, igniter which ignites the percussion powder, and a delay system that delays the combustion for a period of time. The percussion powder is loaded first, followed by the igniter and then the delay system, and the ammunitions explode by the energy being transferred in the same order. Tamping occurs by combustion-stopping of the igniter or insufficient energy transfer from the igniter to the delay system or the combustion-stopping of the delay system, which are suspected to be caused by low purity of the components, inappropriate mixing ratio, size distribution of particulate components, type of the binder, blending method, hydrolysis by the humidity penetrated during the long term storage, and chemical changes of the components by high temperature. Goal of this study is to find the causes of the combustion-stopping of the igniter and the delay system of the ammunitions after long term storage. In this study, a method was developed for testing of the combustion-stopping, and the size distributions of the particulate components were analyzed with field-flow fractionation (FFF), and then the mechanism of chemical change during long term storage was investigated by thermal analysis (differential scanning calorimetry), XRD (X-ray diffractometry), and XPS (X-ray photoelectron spectroscopy). For the ignition system, M (metal)-O (oxygen) and M-OH peaks were observed at the oxygen's 1s position in the XPS spectrum. It was also found by XRD that $Fe_3O_4$ was produced. Thus it can be concluded that the combustion-stopping is caused by reduction in energy due to oxidation of the igniter.

• KIPS Transactions on Computer and Communication Systems
• /
• v.12 no.5
• /
• pp.171-180
• /
• 2023

The three major sleep disorders in Korea are snoring, sleep apnea, and insomnia. Lack of sleep is the root of all diseases. Some of the most serious potential problems associated with sleep deprivation are cardiovascular problems, cognitive impairment, obesity, diabetes, colitis, prostate cancer, etc. To solve these problems, the Korean government provided low-cost national health insurance benefits for polysomnography tests in July 2018. However, insomnia patients still have problems getting treated in terms of time, space, and economic perspectives. Therefore, it would be better for insomnia patients to be allowed to test at home. The measuring device can measure six biosignals (eye movement, tossing and turning, body temperature, oxygen saturation, heart rate, and audio). A gyroscope sensor (MPU9250, InvenSense, USA) was used for eye movement, tossing, and turning. The input range of the sensor was in 258°/sec to 460°/sec, and the data range was in the input range. Body temperature, oxygen saturation range, and heart rate were measured by a sensor (MAX30102, Analog Devices, USA). The body temperature was measured in 30 ℃ to 45 ℃, and the oxygen saturation range was 0% for the unused state and 20 % to 90 % for the used state. The heart rate measurement range was in 40 bpm to 180 bpm. The measurement of audio signal was performed by an audio sensor (AMM2742-T-R, PUIaudio, USA). The was -42 dB ±1 dB frequency range was 20 Hz to 20 kHz. The measured data was successfully received in wireless network conditions. The system configuration was consisted of a PC and a mobile app for bio-signal measurement and data collection. The measured data was collected by mobile phones and desktops. The data collected can be used as preliminary data to determine the stage of sleep and perform the screening function for sleep induction and sleep disturbances. In the future, this convenient sleep measurement device could be beneficial for treating insomnia.

• Asia Marketing Journal
• /
• v.13 no.1
• /
• pp.51-84
• /
• 2011

It seems essential to examine the factors that may affect relationship commitment of subcontractors to parent companies in the industrial market in Korea in an effort to construct a win-win-type cooperative network among them. Lots of studies have been focusing on the consumer goods market. Relatively few studies have been focused on industrial market. In the industrial goods market subcontractors used to sell their parts or services only to a small number of parent companies in a large quantity, resulting in decisive control of subcontractors over the quality of parent companies' finished goods. This is why relationship between subcontractors and parent companies is extremely important. From this viewpoint, this study aims to survey and analyze empirically the paths leading to relationship commitment of subcontractors toward the parent companies which are required to incite them to build up a collaborative network by means of subcontractors' entrepreneurship. For this aim, market orientation effects of entrepreneurship as well as factors of performance and trust are particularly set forth as the bases of developing hypotheses in this study in order to explore the paths from entrepreneurship to relationship commitment as follows. First, the path of entrepreneurship-market orientation-communication-trust- relationship commitment; second, the path of entrepreneurship-market orientation-performance-relationship commitment; third, the path of entrepreneurship-market orientation-transaction specific asset investment -trust-relationship commitment; and fourth, the path in which the entrepreneurship is expected to promote direct transaction specific asset investment by parent companies to induce their trust and, eventually, relationship commitment of subcontractors. The outcomes of the empirical analysis in this study may be summed up as follows: First, the conclusions of preceding studies are also supported here by the fact that the entrepreneurship of subcontractors promotes their market orientation (hypothesis 9), indicating that the entrepreneurship can facilitate collection, proliferation of and response to market informations. On the contrary, however, the assumption that the entrepreneurship of subcontractors might directly accelerate transaction specific asset investment by parent companies (hypothesis 8) is rejected. Second, although the influence of subcontractors' entrepreneurship on parent companies' investment of assets peculiar to their transactions is not affirmed, the assumption is found to be supported that subcontractors' market orientation would expedite the parent companies' investment of assets peculiar to their transactions. Moreover, it is also confirmed that parent companies' investment of assets peculiar to transactions would promote subcontractors' trust toward the parent companies (hypothesis 6), signifying that parent companies may level up their trust in subcontractors when they make great amount of efforts to invest in the assets peculiar to transactions, not behaving opportunistically, Third, the hypotheses 4 and 5 also turn out to be supported by the analysis as the former assumes that market orientation could promote communication and the latter relates that the communication between subcontractors and parent companies would prompt trust, both results in affirming that market orientation could introduce open communication to speed up sharing of information and that sharing of information by way of communication might give an impetus to trust. Fourth, the assumption that subcontractors' market orientation would expedite performance (hypothesis 3) is also proved favorably to the significant level equivalent to that of preceding studies. Fifth, same as preceding studies, it is also verified in this study that the benefit (outcomes) awarded by parent companies to subcontractors will be a direct cause exercising a positive impact upon relationship commitment(hypothesis 2) and that the trust of subcontractors toward parent companies may have affirmative influence on the relationship commitment(hypothesis 1). Overall, the first, second and third paths are identified as being supported by the hypotheses among constituent factors, while the fourth path is deemed meaningless since it is shown that the entrepreneurship exercises no effects on parent companies' investment in the assets peculiar to transactions.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.20 no.1
• /
• pp.35-47
• /
• 2018

A edible mushroom, Clitocybe maxima (Lentinus giganteusis) commercially cultivated in China and Taiwan. However, the researches of cultivation and cultural characteristics were not reported in Korea. In this study, we conducted on cultural characteristics and artificial cultivation of C. maxima. Six isolates were collected from China(3 isolates, commercial strain), Taiwan(1 isolate, commercial strain) and Korea(2 isolates, wild type). C. maxima and L. giganteus collected in China and Taiwan, respectively, are the same in China and are estimated to be of the same species as cultured characteristics. The mycelial growth of the collected strains was not significantly different in agar medium but it showed the best growth in YPMG in liquid culture. Optimum temperature for mycelial growth and induction of fruit body were 25℃ and 30℃, respectively. In order to artificial cultivation of C. maxima, cultural characteristics and artificial cultivation were carried out using agricultural by-products and forestry by-products materials. Mycelial growth was suitable in rice straw, cottonwood sawdust, corncob and rice seed medium, and it was selected as a cultivation medium. The suitable medium for artificial cultivation of C. maxima was selected to mixed medium 2(compounding ratio(v/v): 55% of hardwood sawdust, 5% of cottonseed pellets, 10% of cottonseed, 15% of beet pulp, 15% of swollen rice husks). It took about 30 days to be able to harvest, it was faster than oyster mushrooms. The cultivation period was about 30days. A isolate, CMA-002 was not initiation to fruit body primordiuma on the used cultivation substrate. Other 5 isolates were initiate and development to fruit body on the substrate used in this study. The strain CMA-003 was initiated to be fruiting body by 8~10 days after induction of fruiting body in all of the substrates. Isolate CMA-003 was generate to a bundle fruit body. Other isolates, however, were form fruit body individually. The CMA-003 strain was likely highly recommendable strains for farming. The optimum conditions for the induction and growth of C. maxima fruit body were 25~30℃, 8 hr illumination per day with white fluorescent lamp, 90~95% relative humidity, and 1,500 ppm of CO₂ concentration in a cultivation room.

• Journal of Wetlands Research
• /
• v.25 no.4
• /
• pp.297-305
• /
• 2023

The recycled irrigation is a type of irrigation that uses downstream water to fulfill irrigation demand in the upstream agricultural areas; the used irrigation water returns back to the downstream. The recycled irrigation is advantageous for securing irrigation water for plant growth, but the returned water typically contains high levels of nutrients due to excess nutrients inputs during the agricultural activities, potentially deteriorating stream water quality. Therefore, quantitative assessment on the effect of the recycled irrigation on the stream water quality is required to establish strategies for effective irrigation water supply and water quality management. For this purpose, a watershed model is generally used; however no functions to simulate the effects of the recycled irrigation are provided in the existing watershed models. In this study, we used multi-reservoir model coupled with the Hydrological Simulation Program-Fortran (HSPF) to estimate the effect of the recycled irrigation on the stream water quality. The study area was the Gwangok stream watershed, a subwatershed of Gyeseong stream watershed in Changnyeong county, Gyeongsangnam-do. The HSPF model was built, calibrated, and used to produce time series data of flow and water quality, which were used as hypothetical observation data to calibrate the multi-reservoir model. The calibrated multi-reservoir model was used for simulating the recycled irrigation. In the multi-reservoir model, the Gwangok watershed consisted of two subsystems, irrigation and the Gwangok stream, and the reactions (plant uptake, adsorption, desorption, and decay) within each subsystem, and fluxes of water and materials between the subsystems, were modeled. Using the developed model, three scenarios with different combinations of the operating conditions of the recycled irrigation were evaluated for their effects on the stream water quality.

• Journal of Food Hygiene and Safety
• /
• v.39 no.2
• /
• pp.163-170
• /
• 2024

Red ginseng is manufactured as a health-functional food and is also present in various food types and in different product forms. However, there is currently no standardized regulation of ginsenoside content in foods containing red ginseng. In the present study, we analyzed the ginsenoside content of 66 red ginseng-containing foods and 35 health-functional foods collected online and directly from the market. The ginsenoside content was assessed using liquid chromatography (LC) and liquid chromatography-tandem mass spectrometry (LC-MS/MS) methods. The ginsenoside content of the various food types ranged 0.0 (not detected)-71.567 mg per daily intake of foods containing red ginseng. Sugar-preserved foods had the highest ginsenoside content, followed by solid teas, liquid teas, and red ginseng beverages. For health-functional foods, the ginsenoside content ranged 3.4-58.5 mg per daily intake, with levels ranging 83-607% of the indicated amounts. All values met the established standards. Upon comparing red ginseng health-functional foods and red ginseng-containing foods, the average ginsenoside content was determined to be 18.21 and 8.79 mg, respectively, thus being nearly twice as high in health-functional foods. However, there was a minimal difference between the ginsenoside content of red and black ginseng, with values of 11.84 and 12.63 mg, respectively. These findings provide insights on the variations in ginsenoside content of red and black ginseng in various food forms. This information is expected to be valuable for future regulations and consumer choice of products containing red ginseng.

• Journal of the Korean Society of Radiology
• /
• v.82 no.3
• /
• pp.654-669
• /
• 2021

Purpose To evaluate the accuracy of MRI in predicting the pathological complete response (pCR) and the residual tumor size of breast cancer after neoadjucant chemotherapy (NAC), and to determine the factors affecting the accuarcy. Materials and Methods Eighty-eight breast cancer patients who underwent surgery after NAC at our center between 2010 and 2017 were included in this study. pCR was defined as the absence of invasive cancer on pathological evaluation. The maximum diameter of the residual tumor on post-NAC MRI was compared with the tumor size of the surgical specimen measured pathologically. Statistical analysis was performed to elucidate the factors affecting pCR and the residual tumor size-discrepancy between the MRI and the pathological measurements. Results The pCR rate was 10%. The diagnostic accuracy of MRI and the area under the curve for predicting pCR were 90.91% and 0.8017, respectively. The residual tumor sizes obtained using MRI and pathological measurements showed a strong correlation (r = 0.9, p < 0.001), especially in patients with a single mass lesion (p = 0.047). The size discrepancy between MRI and the pathological measurements was significantly greater in patients with the luminal type (p = 0.023) and multifocal tumors/non-mass enhancement on pre-NAC MRI (p = 0.047). Conclusion MRI is an accurate tool for evaluating pCR and residual tumor size in breast cancer patients who receive NAC. Tumor subtype and initial MRI features affect the accuracy of MRI.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.68 no.4
• /
• pp.262-275
• /
• 2023

This study aimed to assess the preferences of African, American, and Asian panels, in comparison to a Korean panel, for various Korean rice varieties, including three japonica, two indica, and one Tongil-type, all developed by the Rural Development Administration in Korea. Regarding rice appearance, most panelists, except for the Koreans, favored long and slender rice varieties like 'Hanyeol', 'Hyangyeol', and 'Amissal'. In contrast, the Koreans preferred wider varieties like 'Sindongjin' and 'Deuraehyang'. Notably, the overseas panelists consistently favored rice varieties with high appearance quality in sensory evaluations of cooked rice. Both overseas and Korean panelists strongly preferred the indica rice variety 'Hanyeol' in terms of appearance quality and sensory evaluations. However, Korean rice varieties like 'Amissal' and 'Sindongjin' scored high in appearance quality with overseas panelists but received low ratings in sensory aspects, including shape, stickiness, and taste, compared to those for 'Hanyeol'. This suggests that considering sensory characteristics is important when exporting Korean rice varieties. Regarding taste characteristics preferred by the panelists derived from the correlation analysis between taste traits, Africans preferred rice with a smooth texture and no stickiness, especially favoring long-grain rice. Americans leaned towards rice with a slightly firm texture, some stickiness, and late aging characteristics. Asians preferred rice with a smooth texture, low stickiness, and long-grain varieties. In contrast, Koreans favored round rice with a glossy appearance, a slightly firm texture, late aging traits, and some stickiness. These research findings can serve as valuable data for the development of rice varieties for overseas markets and are expected to contribute to securing competitiveness in international markets.

• Journal of Intelligence and Information Systems
• /
• v.23 no.1
• /
• pp.23-46
• /
• 2017

Although there have been cases of evaluating the value of specific companies or projects which have centralized on developed countries in North America and Europe from the early 2000s, the system and methodology for estimating the economic value of individual technologies or patents has been activated on and on. Of course, there exist several online systems that qualitatively evaluate the technology's grade or the patent rating of the technology to be evaluated, as in 'KTRS' of the KIBO and 'SMART 3.1' of the Korea Invention Promotion Association. However, a web-based technology valuation system, referred to as 'STAR-Value system' that calculates the quantitative values of the subject technology for various purposes such as business feasibility analysis, investment attraction, tax/litigation, etc., has been officially opened and recently spreading. In this study, we introduce the type of methodology and evaluation model, reference information supporting these theories, and how database associated are utilized, focusing various modules and frameworks embedded in STAR-Value system. In particular, there are six valuation methods, including the discounted cash flow method (DCF), which is a representative one based on the income approach that anticipates future economic income to be valued at present, and the relief-from-royalty method, which calculates the present value of royalties' where we consider the contribution of the subject technology towards the business value created as the royalty rate. We look at how models and related support information (technology life, corporate (business) financial information, discount rate, industrial technology factors, etc.) can be used and linked in a intelligent manner. Based on the classification of information such as International Patent Classification (IPC) or Korea Standard Industry Classification (KSIC) for technology to be evaluated, the STAR-Value system automatically returns meta data such as technology cycle time (TCT), sales growth rate and profitability data of similar company or industry sector, weighted average cost of capital (WACC), indices of industrial technology factors, etc., and apply adjustment factors to them, so that the result of technology value calculation has high reliability and objectivity. Furthermore, if the information on the potential market size of the target technology and the market share of the commercialization subject refers to data-driven information, or if the estimated value range of similar technologies by industry sector is provided from the evaluation cases which are already completed and accumulated in database, the STAR-Value is anticipated that it will enable to present highly accurate value range in real time by intelligently linking various support modules. Including the explanation of the various valuation models and relevant primary variables as presented in this paper, the STAR-Value system intends to utilize more systematically and in a data-driven way by supporting the optimal model selection guideline module, intelligent technology value range reasoning module, and similar company selection based market share prediction module, etc. In addition, the research on the development and intelligence of the web-based STAR-Value system is significant in that it widely spread the web-based system that can be used in the validation and application to practices of the theoretical feasibility of the technology valuation field, and it is expected that it could be utilized in various fields of technology commercialization.