• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.10 no.4
• /
• pp.398-410
• /
• 1998

Two-phase flow phenomena are observed in many industrial facilities and make much importance of optimum design for nuclear power plant and the liquid transportation system. The particular flow pattern depends on the conditions of pressure, flow velocity, and channel geometry. However, the research on drag reduction in two-phase flow is not intensively investigated. Therefore, experimental investigations have been carried out to analyze the drag reduction and void fraction by polymer addition in the two-phase flow system. We find that the polymer solution changes the characteristic of two-phase flow. The peak position of local void friction moves from tile wall of the pipe to the center of the pipe when polymer concentration increase. And then we predict that it is closely related with the frau reduction.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.2 no.2
• /
• pp.97-100
• /
• 1997

Cyclodxtrin homologues(CDs), produced by cyclodextrin glycosyltransferase(CGTase), were simultaneously partitioned in aqueous two-phase system(ATPS). Partition coefficients of CDs were measured in PEG/dextran systems. Phosphate, citrate, sulfate were tested as salt. ATPS of PEG/salt and PEG/dextran had the partition coefficients of the CDs, larger than unity. However, PEG/dextran system was observed better than PEG/salt as CGTase activity decreased sharply with salt concentration. Enzymatic rection occurred mainly in PEG-rich bottom phase because of the low partition coefficient of CGTase. The resulting CDs transferred to the PEG-rich top phase, obeying the diffusional partition. In the ATPS of 7% PEG(M.W.40, 000), 7mg/ml of CDs were obtained in top phase at 4.5 hours.

• Journal of Microbiology and Biotechnology
• /
• v.9 no.5
• /
• pp.589-592
• /
• 1999

Suspension cultures of Digitalis lanata were successfully performed in an aqueous two-phase system (ATPS) of 4.5％ polyethylene glycol (PEG) 20,000 and 2.8％ crude dextran. Cell growth in the medium containing an individual ATPS-forming polymer was inhibited due to the toxicity of PEG and a high viscosity of dextran. Formation of ATPS supported cell growth by showing a considerably decrease in viscosity and partitioning of cells into a PEG-lean dextran phase. It was found that an aqueous two-phase cultivation of plant cells in a stirred tank bioreactor could be successfully applied.

• Journal of Korean Institute of Industrial Engineers
• /
• v.22 no.1
• /
• pp.95-104
• /
• 1996

We consider a two-phase queueing system with generalized vacation. Poisson arrivals receive a batch type service in the first phase and individual services in the second phase. The server takes generalized vacation when the system becomes empty. Generalized vacation includes single vacation, multiple vacation, and other types. We consider both gated batch service and exhaustive batch service. This is an extension of the model presented by Selvam and Sivasankaran [6].

• Journal of Microbiology and Biotechnology
• /
• v.7 no.4
• /
• pp.258-261
• /
• 1997

For the efficient production of lysophospholipid the hydrolysis of phospholipid using phospholipase $A_1$ from Serratia sp. MK1 was studied in an aqueous-solvent, a two-phase and an emulsion system. Judged on the basis of productivity and the degree of hydrolysis, the yield of lysophospholipid in a two-phase system was found to be better than that obtained in an emulsion system. Among the 13 organic solvents tested phospholipase $A_1$ showed the most efficient catalytic activity and stability in butyl acetate. When 20% phospholipid was used it was completely hydrolyzed in this two-phase system.

• ETRI Journal
• /
• v.25 no.4
• /
• pp.238-246
• /
• 2003

This paper introduces the modeling and analysis of a discrete-time, two-phase queueing system for both exhaustive batch service and gated batch service. Packets arrive at the system according to a Bernoulli process and receive batch service in the first phase and individual services in the second phase. We derive the probability generating function (PGF) of the system size and show that it is decomposed into two PGFs, one of which is the PGF of the system size in the standard discrete-time Geo/G/1 queue without vacations. We also present the PGF of the sojourn time. Based on these PGFs, we present useful performance measures, such as the mean number of packets in the system and the mean sojourn time of a packet.

• Korean Journal of Materials Research
• /
• v.24 no.8
• /
• pp.429-433
• /
• 2014

As the fabrication technology used in FPDs(flat-panel displays) advances, the size of these panels is increasing and the pattern size is decreasing to the um range. Accordingly, a cleaning process during the FPD fabrication process is becoming more important to prevent yield reductions. The purpose of this study is to develop a FPD cleaning system and a cleaning process using a two-phase flow. The FPD cleaning system consists of two parts, one being a cleaning part which includes a two-phase flow nozzle, and the other being a drying part which includes an air-knife and a halogen lamp. To evaluate the particle removal efficiency by means of two-phase flow cleaning, silica particles $1.5{\mu}m$ in size were contaminated onto a six-inch silicon wafer and a four-inch glass wafer. We conducted cleaning processes under various conditions, i.e., DI water and nitrogen gas at different pressures, using a two-phase-flow nozzle with a gap distance between the nozzle and the substrate. The drying efficiency was also tested using the air-knife with a change in the gap distance between the air-knife and the substrate to remove the DI water which remained on the substrate after the two-phase-flow cleaning process. We obtained high efficiency in terms of particle removal as well as good drying efficiency through the optimized conditions of the two-phase-flow cleaning and air-knife processes.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.3
• /
• pp.378-386
• /
• 2012

For reduction of the amount of CO2 emitted from ships, power generation characteristics of two power generation systems consisting of a high-efficiency permanent magnet synchronous generator and diode bridge rictifiers are discussed in this paper. One of the discussed systems has three-phase stator windings, and the other has two sets of three-phase (six-phase) stator windings to reduce pulsation in the electromagnetic torque and DC current. Experimental results reveal that the power generation efficiency of the system having six-phase stator windings is higher than that of the system having three-phase stator windings for a light load. The maximum power generation efficiency of the system having six-phase stator windings is almost the same as that of the system having three-phase stator windings. For the electromagnetic torque of the system having six-phase stator windings, the width of pulsation is about one-fifth compared to the system having three-phase stator windings.

• Journal of Mechanical Science and Technology
• /
• v.17 no.3
• /
• pp.429-439
• /
• 2003

Counter-current two-phase flows of air- water in narrow rectangular channels with offset strip fins have been experimentally investigated in a 760 mm long and 100 mm wide test section with 3.0 and 5.0 mm gap widths. The two-phase flow regime, channel-average void fractions and two-phase pressure gradients were studied. Flow regime transition occurred at lower superficial velocities of air than in the channels without fins. In the bubbly and slug flow regimes, elongated bubbles rose along the subchannel formed by fins without lateral movement. The critical void fraction for the bubbly-to-slug transition was about 0.14 for the 3 mm gap channel and 0.2 for the 5 mm gap channel. respectively. Channel-average void fractions in the channels with fins were almost the same as those in the channels without fins. Void fractions increased as the gap width increased, especially at high superficial velocity of air. The presence of fins enhanced the two-phase distribution parameter significantly in the slug flow, where the effect of gap width was almost negligible. Superficial velocity of air dominated the two-phase pressure gradients. Liquid superficial velocity and channel gap width has only a minor effect on the pressure gradients.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.12
• /
• pp.939-946
• /
• 2009

Wettability is a critical parameter in micro-scale two-phase system. Several previous results indicate that wettability has influential affect on two-phase flow pattern in a microchannel. However, previous studies conducted using circular microtube, which was made by conventional fabrication techniques. Although most applications for micro thermal hydraulic system has used a rectangular microchannel, data for the rectangular microchannel is totally lack. In this study, a hydrophilic rectangular microchannel was fabricated using a photosensitive glass. And a hydrophobic rectangular microchannel was prepared using silanization of glass surfaces with OTS (octa-dethyl-trichloro-siliane). Experiments of two-phase flow in the hydrophilic and the hydrophobic rectangular microchannels were conducted using water and nitrogen gas. Visualization of twophase flow pattern was carried out using a high-speed camera and a long distance microscope. Visualization results show that the wettability was important for two-phase flow pattern in rectangular microchannel. In addition, two-phase frictional pressure drop was highly related with flow patterns. Finally, Two-phase frictional pressure drop was analyzed with flow patterns.