• 한국산학기술학회논문지
• /
• 제20권6호
• /
• pp.188-200
• /
• 2019

본 연구의 목적은 교육복지우선지원사업 성과지표 개발 연구의 연장선으로, 학교 현장에의 적용을 위해 내용타당도를 확보하는 것이다. 본 연구에 사용된 교육복지우선지원사업 성과지표(안)은 6개 대영역, 33개 하위영역, 233개 문항으로 구성되었다. 교육복지 분야 박사급 전문가 5인을 대상으로 2회의 전문가 회의를 실시하였고, 현장에서 5년 이상 근무한 교육복지사 99명을 대상으로 델파이조사를 실시하였다. 문항 선정 기준($CVR{\geq}.29$, $CVI{\geq}.80$, 수렴도<.50, 합의도${\geq}.05$, 안정도${\leq}.80$, $M{\geq}3.00$, SD<.80, 신뢰도${\geq}.6$)을 적용하여, 6개 대영역, 23개 하위영역, 93개 문항에 대해 타당성을 확보하였고, 이 중 신뢰도가 낮은 3문항을 제외하여 최종 90문항으로 확정하였다. 교육복지우선지원사업 성과지표가 현장에서 보다 유용하게 활용되기 위한 제언과 후속 연구를 제시하였다.

• 농촌계획
• /
• 제15권4호
• /
• pp.1-10
• /
• 2009

Rural amenity is regarded as a breakthrough that can revitalize the rural communities. The demand for rural amenity development is also increasing since the urban people have growing incomes and leisure time. This study was implemented to survey the needs and application directions of rural amenity database. The survey questionnaires were collected from various related groups including industry, universities, administration and research institute. Two kinds of analysis of variance (ANOVA) were carried out in order to prioritize the building rural amenity resource map among four user groups and ten rural amenity resources. The result of survey showed that most of respondents had been aware of amenity resources and the industry group had the highest level of utilization in making decisions for rural development. Although the significant difference among groups was not shown in the priority, the priority in the construction of information map was shown the significant difference among 10 kinds of amenity resources. Landscape's map and traditional resource map were relatively higher priority than the other resource map.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권12호
• /
• pp.6079-6097
• /
• 2018

Safety-related systems (SRSs) has widely used in shipbuilding and power generation to prevent fatal accidents and to protect life and property. Thus, SRS performance is a high priority. The safety integrity level (SIL) is the relative performance level of an SRS with regard to its ability to operate reliably in a safe manner. In this article, we proposed an optimal design procedure to achieve the targeted SIL of SRSs. In addition, a more efficient failure mode and effects diagnostic analysis (FMEDA) process and optimization model were developed to improve cost efficiency. Based on previous IEC 61508 diagnostic analyses that revealed unnecessary costs associated with excessive reliability, the new approach consists of two phases: (i) SIL evaluation by FMEDA, and (ii) solution optimization for achieving the target SIL with minimal cost using integer-programming models. The proposed procedure meets the required safety level and minimizes system costs. A case study involving a gas-detection SRS was conducted to demonstrate the effectiveness of the new procedure.

• 기술혁신학회지
• /
• 제17권4호
• /
• pp.673-702
• /
• 2014

본 연구의 목적은 한국과 인도 양국 간의 SW분야 기술협력 과제의 도출과 협력 전략방안 모색이다. 이를 위하여 먼저 SW산업의 특징과 시장규모, 양국 내에서의 산업현황, 그리고 기술 수준을 분석하였다. 그런 다음 이른바 4P라고 불리는 연구자평가, 특허평가, 논문평가 및 제품평가 결과 양국 간 SW산업 우선협력기술과제로서 21개의 연구프로젝트를 선정하였다. 양국 간 협력 접근적 모색을 위해 그간의 산업기술 협력경험과 상호수요에 입각하여 소프트웨어 산업 기술 분야 인력교류의 활성화, 지식재산권관리 강화 및 협력기금의 조성 등이 제안되었다.

• 전기학회논문지
• /
• 제66권1호
• /
• pp.1-6
• /
• 2017

Total capacity of pumped hydro storage(PHS) in Korean power system reaches 4,700MW, though the share of it is about 4.56% of total capacity The Unit Commitment program, E-terracommit which is used for the operational purpose by KPX, includes the PHS model. But the model has a defect that it does not include the information of water level of upper reservoir. Therefore two types of improved the PHS models are represented in this paper. The first model is a optimized model by connecting the upper reservoir water level to the non-spinning reserve. The other model is to have priority allocate both the PHS and combined cycle generator for non-spinning reserve. The proposed two models and the E-terracommit model is compared and resulting to have improvement in estimating non-spinning reserve when using the proposed models.

• 대한기계학회논문집
• /
• 제19권7호
• /
• pp.1604-1618
• /
• 1995

In the process of mechanical assembly design, assembly modeling systems have been used mainly for the design verification before manufacturing by enabling to check the interference and/ or the dynamic and kinematic performance. However, the conventional assembly modeling systems have a shortcoming that they can not be used in the initial design stage but can be used only after the design is fully completed. In other words conventional assembly modeling systems provide bottom-up modeling which means that the detailed modeling of components must precede the definition of relationships between them. To resolve this problem, an assembly modeling system is proposed to provide a top-down modeling environment in which components and assembly can be modeled simultaneously. To this end, an assembly data structure suitable for top-down assembly modeling has been established. Feature positioning Module(FPM) using geometric constraints has been also developed. The Sekective Solving Method proposed for FPM is based on the priority between the constraint equations and enables the designer's intent expressed by geometric constraints to be maintained throughout the whole modeling process. Finally, the feature based modeling technique using two-level features has been developed. Two-level features include an abstract model and a detailed model in a merged form in non-manifold data frame.

• 한국정보처리학회논문지
• /
• 제4권7호
• /
• pp.1770-1780
• /
• 1997

ATM 망에서의 폭주로 인한 셀 손실은 피할 수 없기 때문에 영상 데이터 전송시 화질의개선 여지가 문제점으로 남아있다. ATM망에서 MPEG 비디오 전송시에 무차별적인 셀들의 손실은 서비스 품질의 심각한 저하를 가져올 수 있다. 본 논문에서는 이러한 문제점을 해결하기 위해 두 가지 방법을 제안한다. 첫째, MPEG 부호화기의 데이터 스트림의 트래픽 특성을 분석하여 높은 우선 순위의 데이터 스트림을 생성한다. 그리고 망의 폭주시에 가능한 한 낮은 우선 순위의 셀들을 폐기시키고 높은 우선 순위의 셀들을 전송하게 함으로써 사용자의 QOS를 보장한다. 이 때 부호화기의 데이터 스트림에 대한 우선 순위는 파라미터 ${\beta}$값의 증감에 따라 우선 순위 단계를 조절한다. 둘째, ${\beta}$값이 클수록 우선 순위가 높은 셀들의 수가 증가하게 된다. 이것은 망의 폭주시 우선 순위가 높은 셀의 손실을 초래한다. 이를 예방하기 위하여 본 연구에서는 사용량 감시 제어기를 설치하여 버퍼의 상태에 따라 전송률을 재 조절하는 방법을 취한다. 즉, 부호화기의 대역폭은 부호화기와 네트워크 사이의 재협상을 통하여 얻는다. 본 논문에서는 부호화기의 대역폭 요구사항을 최대 셀 전송률, 버스트 길이, 지속율을 다루는 사용 파라미터 제어(UPC)에 의하여 얻는다. 네트워크 인터페이스 카드(NIC : Network Interface Card)에 있는 적용 부호화기의 비트율 제어 알고리즘은 사용자의 QOS를 유지하기 위해 필요한 UPC 파라미터를 계산한다. 시뮬레이션시에는 동적인 UPC를 지원하는 ATM 네트워크 인터페이스 환경을 통하여 MPEG 부호화기의 비트율을 조절함으로써 측정하였다. 우선 순위가 주어진 데이터 스트림의 대역폭 재협상을 통한 실험의 결과는 대역폭의 이득과 우선 순위가 높은 데이터 스트림의 손실을 방지함으로써 영상의 화질이 개선됨을 보여준다.

• 치위생과학회지
• /
• 제23권1호
• /
• pp.1-12
• /
• 2023

Background: This study aimed to identify the present level and needs of clinical dental hygienists and to present the Borich needs assessment and the locus for focus model as integrated priorities. Methods: The participants of this study were dental hygienists working in dental clinics (hospitals). The final data of the 194 participants were analyzed using frequency analysis and a paired sample t-test. To analyze the need for clinical dental hygienists to perform work, the Borich priority determination formula was used. The x-y plane consisting of four quadrants was used to analyze the need using the locus for focus model, which helps to determine the priority while showing visual effects. Results: "Scaling" was the highest required level for clinical dental hygienists, and "panorama taking" was the highest present level. The priorities of educational needs were systematically and visually derived from dental hygienists who were currently working through the Borich needs assessment and the locus for focus model for each task performed in the clinical field. Through the priorities of these two models, a total of 13 items appeared in the common high-level area; "oral health care (disability)," "oral health care (systemic disease)," "applying a rubber dam," "professional mechanical tooth cleaning," "root planing," "taking vital signs," "medication counseling," "wire cutting," "removing cement after removing band/bracket," "delivering bracket," "preparing mini-screw implantation," "dental insurance claim," and "patient reception." Conclusion: Based on the results, the department of dental hygiene should maintain and improve the standardized clinical practice curriculum and clinical dental hygienists' practical skills and contribute to the realization of the legal scope of dental hygienists, reflecting the requirements of clinical fields.

• Environmental Analysis Health and Toxicology
• /
• 제20권4호통권51호
• /
• pp.311-325
• /
• 2005

A chemical ranking and scoring system, CRS - Korea, has recently been developed and proposed to use to prioritize on a screening level the toxic chemicals for monitoring and risk assessment. As CRS-Korea requires rigorous assessments prior to its wide application, an assessment was conducted in this study by examining the contribution of individual parameter score to the final chemical score or ranking. The sensitivity of the system to the default values for various parameters of missing data was also tested. The chemical ranking/score was round to depend primarily on the score of a single parameter, i. e., the chemical release, while toxicity scores show little correlation with the priority Further analysis indicated that the dominating effect of the chemical release results from i) its multiplicative relationship with the other two exposure parameters (biodegradation and persistent) and ii) the fact that a maximum score of 10 was assigned to the chemical release parameter while 5 was assigned for all others. AE the fraction of the data that are missing exceeded $70\%$ for various toxicity parameters at compared to less than $10\%$ for exposure parameters, the sensitivity of the ranking to the default value was not significant (rank correlation coefficient = 0.98) for toxicity parameters. Bated on this assessment, an improved CRS system (CRS - Korea II) was proposed in which the impact of the chemical release was properly adjusted by changing the multiplicative relationship to additive one and the maximum score to 5. Chemical priority was derived for each of 16 provinces by using CRS-Korea II. The chemical priority was found to significantly vary among the provinces. It was concluded that not only the national chemical priority but the local chemical priority should be taken into account in setting the nationwide chemical monitoring and risk assessment strategy.

• The Journal of Advanced Prosthodontics
• /
• 제4권1호
• /
• pp.43-51
• /
• 2012

PURPOSE. The objective of this study was to evaluate the effect of sociodemographic factors on quality of satisfaction towards denture treatment. MATERIALS AND METHODS. One hundred subjects (filling inclusion criteria) who were wearing a denture for at least two months were enrolled and divided into five groups on the basis of sociodemographic variables (age, gender, literacy level, socio-economic and marital status). Questionnaires consisting of 38 questions (positive and negative attitude towards denture satisfaction) related to patients' perception of clinical outcome in different domains such as mastication, appearance, speech, comfort, health, denture care and social status were scored by the subjects. Questions reflecting positive attitude were scored as 2, 1, or 0 (yes, uncertain and no, respectively) and reversely for the negative questions. Statistical analysis was done by using Statistical Package for Social Sciences (${\alpha}$= .05). RESULTS. Level of denture satisfaction was higher in age subgroup belonging to 45 - 65 years of age in relation to comfort, health and denture care. Female and male showed significant priority for denture treatment because of esthetic and function respectively. Level of satisfaction was statistically significant with literacy level. Upper high income group showed significantly higher level of satisfaction only in case of social status. Married group showed significantly higher satisfaction level only with comfort. CONCLUSION. Patients' sociodemographic variables were influential factors on denture satisfaction.