• 제목/요약/키워드: two-dimensional inversion

검색결과 129건 처리시간 0.02초

제체형태와 수위에 따른 전기비저항 반응 연구 (Electrical Resistivity Response Due to the Variation of Embankment Shape and Reservoir Level)

  • 오석훈
    • 지구물리와물리탐사
    • /
    • 제11권3호
    • /
    • pp.214-220
    • /
    • 2008
  • 점토질의 중심코어부에 차수 역할을 의존하는 형식의 제체에 대한 안정성 검토에 자주 적용되는 B차원 전기비저항 탐사자료의 해석 시, 제체의 심벽 구조와 수위에 따른 왜곡 양상을 모델링을 통해 검증하였다. 3차원 구조인 제체의 해석을 주로 2차원으로 수행하는 과정에서 다양한 왜곡효과가 나타났다. 제체의 재료가 수평적으로 균질한 상태에서 수위와 연관지어 분석한 결과, 양안부보다는 제체 중앙부가 비저항 단면에서 수위선을 비교적 정확히 나타내며, 양안에 존재하는 지반 등 3차원 효과로 인해 양안부로 다가가면 수위선이 깊어지는 반응을 보였다. 또한 제체의 가장 외부구조인 채움재부의 경사가 일정할 때, 코어부의 경사가 급할수록 실제 수위와 비슷한 효과를 보였다. 코어부의 경사가 비슷할 때는, 외부 채움재부의 경사가 완만할수록 실제 수위와 비슷한 효과를 보였으며, 양안에서의 3차원 효과도 덜 나타났다. 채움재부의 경사가 급하면 2차원 역산 결과, 실제수위보다 더 깊은 위치에서 수위와 관련된 저비저항대를 지시하였으며, 양안에서의 3차원 효과가 크게 나타났다.

포화도, 간극비 및 응력에 따른 주문진사의 탄성파 속도 (Elastic Wave Velocity of Jumunjin Sand Influenced by Saturation, Void Ratio and Stress)

  • 이정훈;윤태섭
    • 한국지반공학회논문집
    • /
    • 제30권4호
    • /
    • pp.101-106
    • /
    • 2014
  • 관입시험은 한정된 범위에서 1차원적 정보를 얻을 수 있으나, N치는 다양한 지반설계정수와 실험적으로 연관되어 있다. 탄성파를 이용한 비파괴 검사는 역산 과정을 통해 비용 및 시간에 효율적으로 2차원 및 3차원 물성에 대한 지도를 얻을 수 있으며, N치와 탄성파 속도는 간극비, 포화도, 유효응력 등에 의해 좌우된다. 따라서 N치와 탄성파 속도간의 경험적 관계들이 제안되어 왔다. 본 연구는 다양한 간극비와 포화도를 갖는 주문진사에 대해 정지토압조건에서 탄성파를 실험적으로 측정하였다. 그 결과 하중 조건이 간극비 및 포화도에 비하여 가장 영향을 주는 요소로 나타났으며, 간극비와 포화도는 응력-속도 관계의 경향에 영향을 주었다. 각 영향인자간의 관계를 다중회귀분석을 통해 상관식으로 나타내었다.

Changes in lower extremity alignment in standing position using a foot plate

  • Lee, Hye-Mi;Yang, Ji-Eun;Lee, Ju-Yeon;Im, Hong-Jun;Jeong, Yu-Jin;Park, Dae-Sung
    • Physical Therapy Rehabilitation Science
    • /
    • 제5권3호
    • /
    • pp.132-137
    • /
    • 2016
  • Objective: Eversion of the foot is created with internal rotation of the shank, and inversion of the foot is created with external rotation of the shank. The purpose of the study was to investigate the effect of continuous changes in the angle of the subtalar joint on lower extremity alignments. Design: Cross-sectional study. Methods: Seventeen healthy young adult subjects recruited. The subjects were asked to stand up in a natural standing position on a footplate with eye open and equal weight on each foot for 10s in two different conditions: The right subtalar joint was everted continuously $0^{\circ}-20^{\circ}$ and in separate segments of $0^{\circ}$, $5^{\circ}$, $10^{\circ}$, $15^{\circ}$, $20^{\circ}$. The averages of three trials were used. The observation of the changes in the lower extremity was performed with the use of 3-dimensional motion analysis. For data analysis, the SPSS 18.0 software using paired t-test and repeated measures analysis of variance (ANOVA) was applied. Results: The angle was significantly increased at the horizontal rotation angle of the shank, thigh, and ankle without anterior rotation of the pelvis (p<0.05). The maximum horizontal rotation angle at the thigh on $20^{\circ}$ was $-4.52^{\circ}$ in static, and $-3.10^{\circ}$ in the dynamic conditions compared to $0^{\circ}$. Conclusions: Increased unilateral foot pronation, thigh, shank, ankle horizontal rotation variance was significantly effective. The observation of the changes in foot abduction with the use of a 3-dimensional motion analysis augmented in predicting the angle values of each segment of the lower extremity. In further studies, a comparison of the right and left subtalar joints need to be investigated.

요천추 신경총에 대한 자기공명신경조영술의 역할: 주제 범위 문헌고찰 (Role of MR Neurography for Evaluation of the Lumbosacral Plexus: A Scoping Review)

  • 김선경;정준용
    • 대한영상의학회지
    • /
    • 제83권6호
    • /
    • pp.1273-1285
    • /
    • 2022
  • 목적 자기공명신경조영술은 말초신경을 시각화하는 데 최적화된 영상 기법이다. 본 주제 범위 문 헌고찰에서는 요천추신경총에서 자기공명신경조영술의 프로토콜을 조사하고, 요추신경총 질환 환자에서 자기공명신경조영술의 임상적 이득에 대해 고찰하고자 한다. 대상과 방법 두 개의 의료 데이터베이스에서 2021년 9월까지 영문으로 출판된 논문에 대해 체계적 문헌검색을 수행하였다. 'Magnetic resonance Imaging', 'lumbosacral plexus', 'neurologic disease'를 포함하는 55편의 논문을 분석하였다. 결과 요천추신경총의 자기공명신경조영술은 말초 신경 질환의 분포 확인, 신경 주변 주사시 유도, 좌골신경통 환자에서는 척추외 원인 평가에 유용하였다. 혈관억제 기법이 적용된 3차원 단시간 반전회복 고속 스핀에코 영상이 주된 자기공명신경조영술 기법이었다. 결론 향후 요천추신경총의 자기공명신경조영술에 대한 기술적 성숙과 임상적 유용성에 대한 검증이 필요하다.

남서태평양 통가열도 TA (Tofua Arc) 12 해저산의 해저지형과 자력자료를 이용한 3차원 자화벡터역산 모델 연구 (A Study of Three-dimensional Magnetization Vector Inversion (MVI) Modeling Using Bathymetry Data and Magnetic Data of TA (Tofua Arc) 12 Seamount in Tonga Arc, Southwestern Pacific)

  • 최순영;김창환;박찬홍;김형래
    • 지구물리와물리탐사
    • /
    • 제23권1호
    • /
    • pp.22-37
    • /
    • 2020
  • 이 연구는 남서태평양 통가열도에 위치한 TA (Tofua Arc) 12 해저산에 대한 해저지형, 자력자료를 이용한 자화벡터역산 모델링을 통해 해저면에서 심부층까지의 종합적인 3차원 자력구조 특징을 분석하였다. 북서-남동 방향성을 가진 타원형의 칼데라 해저지형이 TA 12 해저산 정상부에서 나타나며, 두 개의 작은 콘 모양의 지형이 칼데라 정상부 함몰지형에 존재한다. 또한 해저산 정상부 서쪽 사면에서는 콘 지형이 나타나는 지역부터 해저산 기저부 남서쪽 사면까지 큰 규모의 사면 해저곡이 보인다. TA 12 해저산에서는 칼데라 함몰지형에 저자기이상대가 나타나고 그 주변 칼데라 정상부 및 사면 지역에 고자기이상대가 둘러싸여 있다. 이는 함몰지형을 포함한 칼데라 정상부 지역에 강한 자성체의 분포 또는 마그마 관입 가능성이 있다고 해석될 수 있다. 3차원으로 해석된 자화벡터역산 결과에서는 해저 -3000 m부터 해저산의 주변 사면지역에서의 고이상대 존재와 자기 감수율이 칼데라 정상부 및 함몰지형의 천부층으로 향해 증가함을 보여 준다. 한편 주로 칼데라 정상부의 해저면 근처에서 소규모 고이상대들이 곳곳에 나타나고 있다. 따라서 TA 12 해저산에서는 마그마가 심부에서 천부로 올라올 때 해저산 주변 사면부에서 칼데라 정상부 및 함몰지형으로 이동했음이 예상된다. 그리고 해저면 근처의 복잡한 자력분포는 잔류자화의 영향으로 추정된다.

유한 요소법을 이용한 2차원 TSP 모델링 (2 Dimensional TSP Modeling Using Finite Element Method)

  • 이홍;서정희;신창수
    • 지구물리와물리탐사
    • /
    • 제6권1호
    • /
    • pp.13-22
    • /
    • 2003
  • TSP탐사는 터널 및 지하공간의 건설 시 굴착 진행 중인 터널 주위의 지질구조를 파악하기 위하여 VSP탐사를 터널 내에 적용한 물리탐사 기법이다. 하지만 터널 굴착예정 지역의 지질구조에 따른 터널 주위에서 파의 전파특성을 보여줄 수 있는 인공 탄성파합성 알고리듬이 부족한 실정이다. 이에 본 연구에서는 기존의 2차원 유한 요소 탄성파 모델링 알고리듬을 발전시켜 터널 전방에 여러 형태의 지질구조가 존재하는 경우에 대하여 2차원 시간영역 탄성파 모델링을 수행하였다. 그리고 이로부터 얻은 인공합성 탄성파단면과 파면단면을 통하여 파의 전파특성을 규명하고자 하였다. 우선 TSP탐사와 동일한 형태의 송수신 배열을 한 후, 균질 매질에 대한 모델링을 수행하여 인공합성 탄성파단면과 파면단면을 동시에 구해 직접파의 전파특성을 분석하였다. 그리고 터널 굴착방향과 수직인 반사면과 평행인 반사면이 존재하는 경우에 대해 각각 모델링을 수행하여 균질 매질의 경우와의 비교, 분석을 통해 반사파들의 전파특성을 고찰하였다. 또한 송신원을 수진기의 앞쪽과 뒤쪽에 배열한 두 가지 경우에 대하여 모델링을 수행하여, 두 방법의 특성과 장단점을 고찰하였다. 이와 같은 모델링을 통하여 TSP탐사자료의 해석, 역산 알고리듬의 개발 및 송수신 개발 등에 도움을 줄 수 있을 것으로 사료된다.

The Effect of Foot Landing Type on Lower-extremity Kinematics, Kinetics, and Energy Absorption during Single-leg Landing

  • Jeong, Jiyoung;Shin, Choongsoo S.
    • 한국운동역학회지
    • /
    • 제27권3호
    • /
    • pp.189-195
    • /
    • 2017
  • Objective: The aim of this study was to examine the effect of foot landing type (forefoot vs. rearfoot landing) on kinematics, kinetics, and energy absorption of hip, knee, and ankle joints. Method: Twenty-five healthy men performed single-leg landings with two different foot landing types: forefoot and rearfoot landing. A motion-capture system equipped with eight infrared cameras and a synchronized force plate embedded in the floor was used. Three-dimensional kinematic and kinetic parameters were compared using paired two-tailed Student's t-tests at a significance level of .05. Results: On initial contact, a greater knee flexion angle was shown during rearfoot landing (p < .001), but the lower knee flexion angle was found at peak vertical ground reaction force (GRF) (p < .001). On initial contact, ankles showed plantarflexion, inversion, and external rotation during forefoot landing, while dorsiflexion, eversion, and internal rotation were shown during rearfoot landing (p < .001, all). At peak vertical GRF, the knee extension moment and ankle plantarflexion moment were lower in rearfoot landing than in forefoot landing (p = .003 and p < .001, respectively). From initial contact to peak vertical GRF, the negative work of the hip, knee, and ankle joint was significantly reduced during rearfoot landing (p < .001, all). The contribution to the total work of the ankle joint was the greatest during forefoot landing, whereas the contribution to the total work of the hip joint was the greatest during rearfoot landing. Conclusion: These results suggest that the energy absorption strategy was changed during rearfoot landing compared with forefoot landing according to lower-extremity joint kinematics and kinetics.

Thermo-mechanical simulations of pillar spalling for in-situ heater test by FRACOD

  • Lee Hee-Suk;Shen Baotang;Mikael Rinne
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
    • /
    • pp.244-251
    • /
    • 2003
  • A two-dimensional BEM code, $FRACOD^{2D}$, was applied to simulate fracture initiation and propagation processes in a rock pillar during an in situ heater test of a rock pillar planned at the $\"{A}sp\"{o}$ Underground Rock laboratory of SKB, in Southern Sweden. To take the advantage of conventional BEM for simulating fracturing processes, but without efforts for domain integral transformation, a hybrid approach is developed to simulate the fracturing processes in rock pillar under coupled thermo-mechanical loading. The code FRACOD was used for simulating the fracture initiation and propagation processes with its boundary tractions reflecting the effects of the initial and redistributed thermomechanical stresses in the domain of interest at multiple excavation and heating steps were produced by a special algorithm of stress inversion, based on resultant thermo-mechanical stress fields at each excavation and heat loading step by a FEM code without considering fracturing processes. This hybrid approach can take the advantages of both types of numerical methods and avoids their shortcomings for fracturing process simulation and domain effects, respectively. In this paper, we present the hybrid approach for the stress, displacements, and fracturing processes at sequential excavation and heating steps of the in situ heater test as a predictive modelling, the formulation of the fracturing models and the predictive results. Two sections of borehole depth, 0.5 m and 1.5 m below the tunnel floor are considered. The pillar area is modelled with the FRACOD and the stress field produced by excavation and heating is transferred with corresponding boundary stresses. From the modelling results, the degree of fracturing and damage are evaluated for 120 days of heating. Dominated shear fracturing in the vicinity of the central pillar was observed from the models at both sections, but spalled area appears to be limited. Based on the modelling results, a sensitivity study for the effect of pre-existing fractures in the vicinity of the holes is also conducted, and the initiation and evolution of EDZ around the deposition holes are investigated using this particular numerical technique.

  • PDF

SH파 초동주시 역산과 표면파 분산곡선 역산으로부터 구한 횡파속도 단면 비교 (Comparison of Shear-wave Velocity Sections from Inverting SH-wave Traveltimes of First Arrivals and Surface Wave Dispersion Curves)

  • 이창민;김기영
    • 지구물리
    • /
    • 제8권2호
    • /
    • pp.67-74
    • /
    • 2005
  • SH파 굴절법 토모그래피와 표면파 분산자료 역산을 통하여 2차원 S파 속도단면을 각각 구하였고, 비교 목적으로 P파 속도단면도 함께 구하였다. P파와 표면파는 지표에 수직하게 타격하여 발생시켰으며, 100 Hz와 4.5 Hz 수직지오폰 24개로 각각 수신하였다. SH파는 50 kg 나무원목의 좌우를 타격하여 발생시켰고, 8 Hz 수평 지오폰으로 수신하였으며, 좌측타격에서 우측타격을 빼주어 SH파 신호를 강화하였다. 초동주시 토모그램과 표면파 분산곡선으로부터 역산과정을 거쳐서 구한 S파 속도단면을 비교한 결과, 두 단면의 전체적인 양상은 서로 비슷하지만, 표면파 역산으로 구한 S파 속도단면이 전반적으로 작은 값을 갖는 경향을 보인다. 잡음에 취약한 SH파는 P파 및 PS 변환파 도달 이후에 기록되어 초동선택이 어려운 문제가 있으며, 균질한 수평모델을 가정하는 표면파의 분산곡선 역산은 측방 변화가 심한 곳에서 지하구조를 정확히 밝히는데 한계가 있음을 보인다.

  • PDF

HWAW 기법의 비수평 출상구조지반 적용에 대한 고찰 (A Study on Application of HWAW Method to the Non-horizontally Layered Soil Structure)

  • 방은석;박헌준;박형춘;김동수
    • 한국지반공학회논문집
    • /
    • 제25권4호
    • /
    • pp.5-17
    • /
    • 2009
  • HWAW 기법은 시간-주파수 해석을 통해 신호/잡음비가 최대가 되는 부분을 이용하여 실험 분산곡선을 획득하고 full wavefield를 고려하는 정모델링 기법을 통해 역산을 수행한다. 따라서 다른 표면파 기법에 비해 짧은 측선 설정이 가능하며 2차원 전단파 속도 분포를 도출하기에 유리하다. 수평층 가정이 성립되지 않는 지반에서의 HWAW 기법 적용성을 평가하기 위해서 수치해석 검증 연구를 수행하였다. HWAW 기법을 통해 각 거 리별로 획득한 실험 분산곡선들은 전반적으로 full wavefield를 고려한 이론 분산곡선과 유사한 형태를 보이는 것을 확인할 수 있었다. 경사면 반사파에 의한 분산곡선의 왜곡현상은 적절한 감지기 간격 조절을 통해 줄여줄 수 있음을 확인할 수 있었다. 도출된 실험 분산곡선은 가진 원으로부터 감지기까지의 영역보다는 감지기 사이 영역에 주되게 영향을 받는 것으로 나타났다. 이로써 HWAW 기법으로 합리적인 전단파 속도 분포의 도출이 가능한 것으로 판단되었으며 고찰한 결과를 바탕으로 실제 현장에서 지반 영상화를 시도하였다.