• 한국실내디자인학회논문집
• /
• 제18권4호
• /
• pp.97-104
• /
• 2009

This thesis analyzed arrangement and mixture method of function elements, which are getting more important in museum planning. It used quantitative method, Space Syntax and Visibility Graph Analysis tool to analyze five case museums. Through this analysis, advantages and disadvantages of two methods were derived and case museums' arrangement and mixture attributes were grasped. Results of the analysis were derived differently by two kinds of plan form which were room to room type and open type. Open typed museum recorded similar graphs of Integration, Visual Integration and Visual Connectivity. Since whole space structures were relatively simple and structure of exhibition halls were opened, the results of Space Syntax and Visibility Graph Analysis had similar graphs. Room to room typed museum showed differences in Integration, Visual Integration and Visual Connectivity. In the result, the most accessible space was lobby and Mediation Space became the center of visibility. Also, the exhibition hall, where the opening of room to room typed exhibition hall was penetrated visually, became a center of visibility. Lobby space, which was close to entrance, had the highest Visibility Connectivity. As Space Syntax could analyze the museum as whole space structure, Space Syntax showed strength in room to room typed museum analysis compared to open typed museum analysis which has relatively simple structure. Visibility Graph Analysis could expect the flow of exhibit distance including visibility analysis unlike the flow of exhibit distance with space arrangement. The exhibition hall, which secures the sight to penetration of an opening, couldn't be analyzed in existing Space Syntax. However, it became the biggest advantages in Visibility Graph Analysis of room to room typed museum. Visibility Graph Analysis derived detailed results in exhibit arrangement so it will be the useful method not only for architecture but also for planning of exhibit arrangement in open typed museum. Through this study, various possibilities on Quantitative Analysis Method of Museum Architecture could be verified. However, the analysis still has limitation of second dimension. Therefore, diverse and liberal following study will be expected to accomplish.

• Journal of Cardiovascular Imaging
• /
• 제31권2호
• /
• pp.98-104
• /
• 2023

BACKGROUND: We aimed to investigate left ventricular (LV) global longitudinal strain (GLS) in end-stage renal disease patients and its change after kidney transplantation (KT). METHODS: We retrospectively reviewed patients who underwent KT between 2007 and 2018 at two tertiary centers. We analyzed 488 patients (median age, 53 years; 58% male) who had obtained echocardiography both before and within 3 years after KT. Conventional echocardiography and LV GLS assessed by two-dimensional speckle-tracking echocardiography were comprehensively analyzed. Patients were classified into three groups according to the absolute value of pre-KT LV GLS (|LV GLS|). We compared longitudinal changes of cardiac structure and function according to pre-KT |LV GLS|. RESULTS: Correlation between pre-KT LV EF and |LV GLS| were statistically significant, but the constant was not high (r = 0.292, p < 0.001). |LV GLS| was widely distributed at corresponding LV EF, especially when the LV EF was > 50%. Patients with severely impaired pre-KT |LV GLS| had significantly larger LV dimension, LV mass index, left atrial volume index, and E/e' and lower LV EF, compared to mildly and moderately reduced pre-KT |LV GLS|. After KT, the LV EF, LV mass index, and |LV GLS| were significantly improved in three groups. Patients with severely impaired pre-KT |LV GLS| showed the most prominent improvement of LV EF and |LV GLS| after KT, compared to other groups. CONCLUSIONS: Improvements in LV structure and function after KT were observed in patients throughout the full spectrum of pre-KT |LV GLS|.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2002년도 학술논문발표회
• /
• pp.97-102
• /
• 2002

The ability to pass between bars is one of the most important performance of self-compacting concrete or high-flowability concrete since it determines the final filling capacity which influences the strength and durability of hardened concrete in structure. Therefore it has been evaluated by many researchers using different kinds of testing apparatuses. The assessments of passing ability, however, differ largely according to the style, the dimension and the criteria in apparatuses, and the value obtained from one apparatus cannot be converted those of the others. There needs a rheological approach to the better understanding of the passing behavior of fresh concrete between reinforcing bars, where the flow velocity of concrete becomes slow and the blockade sometimes occurs due to the interference between aggregates and reinforcing bars. Experimental works were conducted to clarity the effects of the clearance between reinforcing bars, the volume of aggregate and the rheological properties of matrix on the behavior from the rheological point view and showed the rational mix proportioning of concrete.

• 전자공학회논문지B
• /
• 제33B권2호
• /
• pp.28-36
• /
• 1996

By utilizing the interinsic structure of the underlying continous-time nonlinear system, one can design an approximate sampled-data observer improved with respect ot the sampling-time for the systems. In this paper, we characterize the conditions for the solvability of the improved approximate sampled-data nonlinear observer design problem. In particular, it is shown that when the dimension of the state space is two, the nonlinear systems for which it is possible ot desing 3rd or higher order approximate sampled-data nonlinear observer are locally state-equivalent to an observable bilinear system. The practical implication is that seeking higher order approximate sampled-data nonlinear observer for nonlinear systems is very restricted.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 추계 학술논문 발표대회
• /
• pp.235-239
• /
• 2008

Cable systems are a construction of elements carrying only tension and no compression or bending in membrane structure. Tensile membrane structures are most often used as roofs as they can economically and attractively span large distances. But cable systems have weaknesses to vibration by earthquake, wind and vehicle loads. Damage detection of cable systems by using existing safety diagnosis is difficult to detect the characteristic change of overall structural action. If cable snaps are occurred to cable release and tear in tension structures, these are set up a vibration. So, we used piezo-electric materials, and The principle of operation of a piezoelectric sensor is that a physical dimension, transformed into a force, acts on two opposing faces of the sensing element. In this study, the development on test method of cable system is proposed and tested by tensile strength using piezo-electric materials.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.251-251
• /
• 2008

In this work, appropriate corrugated structure is suggested to increase resonant frequency of resonators. Micro beam resonators based on polycrystalline 3C-SiC films which have a two-side corrugation along the length of beams were simulated by finite element method and compared to a same - size flat rectangular. With the dimension of $36\times12\times0.5{\mu}m^3$, the flat cantilever has resonant frequency of 746 kHz. Meanwhile, with this size only corrugation width of $6{\mu}m$ and depth of $0.4{\mu}m$, the corrugated cantilever reaches the resonant frequency at 1.252 MHz, and is 68% larger than that of flat type.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1471-1474
• /
• 2003

The correlation between the object function and the design parameter is shown on this paper by using the characteristic function for tile mixed result of the structure analysis. tile buckling analysis and the table of orthogonal array according to the original crane's dimensional change. About the above two object functions, the effective of design change according to the change of design parameters could be estimated. Also, the crane's weight is reduced up to 20.58 percent maintaining the structural stability according to the thickness of plate.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.127-127
• /
• 2012

We carried out the high-resolution dielectric mapping of graphenes on $SiO_2$/Si substrate, using the scattering Apertureless Near-Field Scanning Optical Microscopy (s-ANSOM) in both visible (633 nm) and infrared (3.6 um) wavelengths. In the visible wavelength, the dielectric contrasts are almost proportional to the number of the graphene layers, which indicates that the near-field interaction between the tip and individual graphene layers leads to an image charge oscillation in two-dimension. In the infrared region, on the other hand, we observe unique layer-specific contrasts that do not linearly increase with number of layers. It is attributed to the layer-dependent band- structure of graphenes.

• International Journal of Aeronautical and Space Sciences
• /
• 제14권4호
• /
• pp.334-340
• /
• 2013

This paper deals with the optimization of blade stiffened composite panels. The main objective of the research is to make response surfaces for the constraints. The response surface for warping thermal deformation was previously made for a fixed dimension composite structure. In this study, the dimensions of the blade stiffener were treated as design variables. This meant that a new response surface technique was required for the constraints. For the response surfaces, the lamination parameters, linear thermal expansions and dimensions of the structures were used as variables. A genetic algorithm was adopted as an optimizer, and an optimal result, which satisfied two constraints, was obtained. As a result, a new response surface was obtained, for predicting warping thermal deformation.

• 산학경영연구
• /
• 제6권
• /
• pp.153-179
• /
• 1993

The main purpose of this study is to suggest the new strategic management model for the future successful company. The new model consists of the following structure. First, to identify the object dimension. The upper object is to satisfy the customers needs. And the lower object is to satisfy the workers needs. Second, to identify the external enviromental problems dimensions. There are five dimensions. They are ethical responsinilities, government-business alliances, collaboration amongst competitors, innovative invester-company relations, and globalization of enterprise. Third, to identify the internal enviromental problems dimensions. There are two dimensions. They are new organizational forms and integrated subcultures. Fourth, to find the solution for the above dimensions. The solution is as follow. All the managers and workers must have business reengineering minds and apply the complexity management. And the company should construct the strategic information systems.