• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(I)
• /
• pp.125-130
• /
• 2003

Korean High Speed Train (KHST) designed to operate at 350km/h has been tested on high speed line in JungBu site since it was developed in 2002. The dynamic performances of railway vehicle are generally stability, safety and ride comfort. The stability performance of KHST was proved that it is stable at 400Km/h through Roller Rig test. The safety and ride comfort need to be predicted the capability of it at 350km/h by the on-line test because KHST is testing at 300km/h up to now. Therefor, in this paper, the safety and ride comfort at 350km/h are predicted the performance using the acceleration results at 300kw/h and these results show that the KHST's dynamic performances are very good. Also, it illustrate the two cases occurred the abnormal vibration of KHST during some on-line tests. The first case is that the variation of vertical acceleration of wheel is analyzed when an abrasion occur on wheel. The second case is that the lateral acceleration of wheel, bogie and body are analyzed when the KHST is unstable at high speed. The occurrences of these special phenomena were due to the some faults of the suspension and braking systems and the faults were improved. In present, it is testing with safety.

• 터널과지하공간
• /
• 제23권3호
• /
• pp.180-191
• /
• 2013

본 연구는 백운광산지역에 부존하는 대리석을 효율적으로 채석하고자 새로이 도입한 체인쏘머신(chain saw machine)의 적용성과 작업 효율을 분석함으로써 최적의 채석 방안을 도출하고자 하였다. 절단 효율에 큰 영향을 미치는 채석대상암석의 물리적 특성을 파악한 결과, 국내 타 지역에서 산출되는 대리석의 물성과 유사한 수준을 보이고 있으며 등방적 성질을 지니고 있어 산업용 석재로서 유리한 것으로 나타났다. 부존 대리석이 석재로서 가지는 중장기 품질을 확인하기 위해 내부식성, 마모율 등의 시험을 수행한 결과, pH 5.6의 인공강우를 50회 적용한 이후부터 시험편의 무게와 탄성파속도가 감소하였으며 마모율은 22.67%로 나타났다. 채석장 현장에서 시험운행 중인 체인쏘머신의 작업별 소요시간과 절단속도를 분석하여 단위작업을 9가지로 분류하였고 각 단위작업별 소요시간을 도출하였다. 이를 토대로 현장에 실제 적용 가능한 2가지 작업패턴에 대한 작업소요시간을 비교한 결과 장비 본체이동을 최소화하여 절단순서를 결정한 패턴 B가 원석의 외곽면을 우선 절단하도록 절단순서를 결정한 패턴 A보다 약 6%의 작업시간 단축을 나타내었다. 절단패턴 분석과 함께 백운광산의 광체를 3차원으로 모델링하고 대상암석의 부존조건을 고려한 채석 계획안을 제시하였다.

• Tribology and Lubricants
• /
• 제32권2호
• /
• pp.50-55
• /
• 2016

Recently, a double-side machining process has been adopted in fabricating a sapphire glass to enhance the manufacturability. Double-side lap grinding (DLG) is one of the emerging processes that can reduce process steps in the fabrication of sapphire glasses. The DLG process uses two-body abrasion with fixed abrasives including pallet. This process is designed to have a low pressure and high rotational speed in order to obtain the required material removal rate. Thus, the temperature is distributed on the DLG platen during the process. This distribution affects the shape of the substrate after the DLG process. The coolant that is supplied into the cooling channel carved in the base platen can help to control the temperature distribution of the DLG platen. This paper presents the results of computational fluid dynamics with regard to the heat transfer in a DLG platen, which can be used for fabricating a sapphire glass. The simulation conditions were 200 rpm of rotational speed, 50℃ of frictional temperature on the pallet, and 20℃ of coolant temperature. The five cases of the coolant flow rate (20~36 l/min) were simulated with a tetrahedral mesh and prism mesh. The simulation results show that the capacity of the generated cooling system can be used for newly developed DLG machines. Moreover, the simulation results may provide a process parameter influencing the uniformity of the sapphire glass in the DLG process.

• 한국전기전자재료학회논문지
• /
• 제17권10호
• /
• pp.1049-1055
• /
• 2004

Chemical Mechanical Polishing (CMP) is referred to as a three body tribological system, because it includes two solids in relative motion and the CMP slurry. On the assumption that the abrasives between the pad and the wafer could be a major reason not only for the friction force but also for material removal during polishing, the friction force generated during CMP process was investigated with the change of abrasive size and concentration of CMP slurry. The threshold point of average coefficient of friction (COF) with increase in abrasives concentration during interlayer dielectric (ILD) CMP was found experimentally and verified mathematically based on contact mechanics. The predictable models, Mode I (wafer is in contact with abrasives and pad) and Mode II (wafer is in contact with abrasives only), were proposed and used to explain the threshold point. The average COF value increased in the low abrasives concentration region which might be explained by Mode I. In contrast the average COF value decreased at high abrasives concentration which might be regarded to as Mode II. The threshold point observed seemed to be due to the transition from Mode I to Mode II. The tendency of threshold point with the variation of abrasive size was studied. The increase of particle radius could cause contact status to reach transition area faster. The correlation between COF and material removal rate was also investigated from the tribological and energetic point of view. Due to the energy loss by vibration of polishing equipment, COF value is not proportional to the material removal rate in this experiment.

• 대한기계학회논문집A
• /
• 제35권12호
• /
• pp.1663-1668
• /
• 2011

자동차 차체를 제작하는 프레스 금형의 가공공정 중 제품의 형태를 완성하는 드로잉 공정 및 불필요한 부분을 절단하는 트리밍 공정은 그 공정의 특성상 금형의 마모가 심하기 때문에 금형의 내마모성을 향상시키기 위한 표면경화처리가 요구되고 있다. 따라서 본 연구에서는 프레스 금형에 레이저 표면처리기술을 적용하기 위한 실험을 실시하였다. 드로잉 공정 및 트리밍 공정에 적합한 표면경화처리를 위해 다이오드 레이저를 이용하여 시험편의 평면부 및 모서리부를 열처리하였으며, 각각의 적정 열처리 조건을 도출하였다. 또한 시험편의 재료에 따른 열처리 특성을 비교하기 위해 구상흑연 및 편상흑연 주철을 사용하여 실험을 진행하였다. 실험 결과, 재료에 따른 열처리 특성에 차이가 있다는 것을 확인하였으며, 적정 열처리된 조건에서의 경화부는 모재에 비하여 약 3배 정도의 경도상승을 나타내었다.

• Journal of Trauma and Injury
• /
• 제24권2호
• /
• pp.61-67
• /
• 2011

Purpose: Lawn trimmers are widely used to cut the weeds around graves in South Korea, but they can cause ocular injury. We investigate at the emergency room the incidence and the clinical features of ocular trauma induced by lawn trimmers. Methods:The authors analyzed 106 patients who visited Konyang University Hospital's emergency room from March 1, 2007, to October 31, 2011, because of ocular trauma caused by a lawn trimmer. Patients were sorted into two groups, severe ocular injury and mild ocular injury. Results: Over a 5-year period, 106 patients with ocular trauma caused by a lawn trimmer underwent clinical study. Most of the patient (103 patients) were males, and the average age of the patients was $51.75{\pm}11.66$ years. The incidence of ocular trauma peaked in the sixth decade of life. Most injuries occurred between July and September. Severe ocular injury developed in 46.2% of all patients. As age increased, so did the severity of the ocular injury. The impacting object was a small stone in 43.4% of all patients. Nobody wore protective gear. The most common diagnosis were corneal abrasion, followed by intraocular foreign body, corneal laceration, and sclera laceration. Fifty-four patients were followed up, and thirty-six patients of them had severe injury. The most common complication was a traumatic cataract. Conclusion: Ocular trauma induced by a lawn trimmer is more severe than general ocular trauma. We suggest that everyone using a lawn trimmer should wear protective gear and follow safety guidelines.

• The Journal of Advanced Prosthodontics
• /
• 제11권1호
• /
• pp.7-15
• /
• 2019

PURPOSE. The aim of this study was to identify the effects of three aesthetic restorative materials on the wear between tooth and restoration by a pin-on-disk manner. MATERIALS AND METHODS. Six aesthetic restorative materials were used to prepare disk specimens for wear test, which were Lava Zirconia as zirconia group, Vintage MP and Cerabien ZR as veneering porcelain group, Gradia Direct microhybrid composite containing prepolymerized fillers, Filtek Z250 microhybrid composite containing zirconia glass and colloidal silica particles, and Filtek Z350 nanocomposite as composite resin group. Vertical loss of the worn cusp, change of the surface roughness of the restoration materials, and the surface topography were investigated after wear test under 9.8-N contact load. RESULTS. The porcelain groups (Vintage MP and Cerabien ZR) caused the largest vertical loss of teeth when compared with those of the composite resin and zirconia groups, and Filtek Z250 microhybrid composite results in the second-largest vertical loss of teeth. The surface of Filtek Z350 nanocomposite was deeply worn out, but visible wear on the surface of the zirconia and Gradia Direct microhybrid composite was not observed. When the zirconia surface was roughened by sand-blasting, vertical loss of teeth considerably increased when compared with that in the case of fine polished zirconia. CONCLUSION. It was identified that microhybrid composite resin containing a prepolymerized filler and zirconia with reduced surface roughness by polishing were the most desirable restorative materials among the tested materials to prevent the two-body wear between aesthetic restorative material and tooth.

• 박물관보존과학
• /
• 제19권
• /
• pp.1-18
• /
• 2018

충주 정토사지 홍법국사탑비(본관1960)는 고려시대의 양식적 특징을 보여주는 중요한 석조문화재이다. 홍법국사탑비는 일제강점기에 수차례 반복된 부재의 해체 및 이동과 동시에 장기간 야외에 노출되어 풍화가 진행된 상태였기 때문에 국립중앙박물관 수장고에 보관되어 왔다. 이 연구에서는 2015년 국립중앙박물관에서 주관하는 석조물복원사업의 일부 대상인 홍법국사탑비의 야외 전시를 위해 재질특성을 규명하고 풍화훼손지도 및 초음파 물성진단을 활용한 손상도 진단을 실시하였으며, 이를 바탕으로 보존처리를 진행하였다. 재질분석 결과, 탑비의 귀부는 중립질 입자크기를 가지는 석영, 사장석, 알칼리장석, 흑운모, 백운모를 구성광물로 가지는 복운모 화강암이다. 탑비의 비신은 담홍색을 띠며 암회색이 혼재되어 나타나고 중립질의 방해석을 조암광물로 가지는 결정질 대리암이다. 이수는 회백색으로 중립질의 방해석을 주요 구성광물로 가지는 결정질 대리암이다. 탑비에서 나타나는 각각의 훼손유형별 점유율 산출 결과 비신에서는 마모로 인한 훼손이 28.29%로 남측면이 가장 높으며, 이수에서는 입상분해로 인한 훼손이 11.08%로 북측면이 심한 것으로 나타났다. 초음파 물성진단을 통해 탑비의 전체적인 풍화도를 파악한 결과 귀부에서는 결구부를 중심으로, 비신에서는 상단부에서 낮은 값을 보였으며, 이는 표면 가공도의 차이와 부분적인 박리 및 균열로 인해 변위가 발생한 것으로 판단된다. 홍법국사탑비의 야외 전시에 앞서 과학적 조사를 바탕으로 외부환경에 의한 풍화를 억제하고자 표면 오염물제거와 표면 강화처리를 진행하였다.