• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1139-1143
• /
• 1991

Using industrial robots and sensors, we developed an inline car body inspection system which proposes high flexibility and sufficient accuracy. Car Body Inspection(CBI) cell consists of two industrial robots, two corresponding carriages, camera vision system, a process computer with multi-tasking ability and several LDS's. As industrial robots guarantee sufficient repeatabilities, the CBI cell adopts the concept of relative measurement instead of that of absolute measurement. By comparing the actual measured data with reference data, the dimensional errors of the corresponding points can be calculated. The length of the robot arms changes according to ambient temperature and it affects the measuring accuracy. To compensate this error, a robot arm calibration process was realized. By measuring a reference jig, the differential changes of the robot arms due to temperature fluctuation can be calculated and compensated.

• 로봇학회논문지
• /
• 제2권2호
• /
• pp.129-136
• /
• 2007

This paper introduces a position-based robust visual servoing method which is developed for operation of a human-like robot with two arms. The proposed visual servoing method utilizes SIFT algorithm for object detection and CAMSHIFT algorithm for object tracking. While the conventional CAMSHIFT has been used mainly for object tracking in a 2D image plane, we extend its usage for object tracking in 3D space, by combining the results of CAMSHIFT for two image plane of a stereo camera. This approach shows a robust and dependable result. Once the robot's task is defined based on the extracted 3D information, the robot is commanded to carry out the task. We conduct several position-based visual servoing tasks and compare performances under different conditions. The results show that the proposed visual tracking algorithm is simple but very effective for position-based visual servoing.

• 전자공학회논문지B
• /
• 제29B권1호
• /
• pp.58-66
• /
• 1992

This paper proposes a neuro-controller for position control of one-link flexible robot arm. Basically the controller consists of a multi-layer neural network and a conventional PD controller. Two controller are parallelly connected. Neural network is traind by the conventional error back propagation learning rules. During learning period, the weights of neural network are adjusted to minimize the position error between the desired hub angle and the actual one. Finally the effectiveness of the proposed approach will be demonstrated by computer simulation.

• 대한기계학회논문집A
• /
• 제24권12호
• /
• pp.3072-3079
• /
• 2000

Assembly tasks are often performed by one robot with fixtures. This type of assembly system has low flexibility in terms of the variety of parts and the part-presentation the system can handle. This paper addresses assembly without fixtures using two-manipulator robot. An active method using force feedback is proposed for the peg-in-hole assembly in highly uncertain environment. Assembly states are defined as status having unique motion constraints and events are modeled as variation of the environmental force. The states are recognized through identification of the events using two 6-d. o. f. force/moment sensors. The proposed method is verified and evaluated by experiments with round peg-in-hole assembly.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.73-73
• /
• 2000

Assembly is usually performed by one robot and fixtures. This type of assembly system has Low flexibility in terms of variety of parts and part-presentation that the system can handle. This paper addresses assembly without fixtures using two-manipulator robot. An active method using force feedback is proposed for the peg-in-hole assembly in highly uncertain environment. Assembly states are described by extended contact relations. Qualitative templates for events are easily derived from the token vector of the Petrinet model. The states are recognized through identification of the events using two 6-d.o.f force/moment sensors. The proposed method is verified and evaluated through experiments with round peg- in-hole assembly.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.184-189
• /
• 2002

Collision free task planning for dual-arm robot which perform many subtasks in a common work space can be achieved in two steps : path planning and trajectory planning. Path planning finds the order of tasks for each robot to minimize path lengths as well as to avoid collision with static obstacles. A trajectory planning strategy is to let each robot move along its path as fast as possible and delay one robot at its initial position or reduce speed at the middle of its path to avoid collision with the other robot.

• 전자공학회논문지
• /
• 제50권3호
• /
• pp.203-211
• /
• 2013

본 논문에서는 바닥작업용 서비스 로봇을 위한 두 팔 매니퓰레이터의 개발 및 제어에 관한 연구를 기술하였다. 6자유도의 매니퓰레이터를 설계하였으며, 그 중 5자유도 매니퓰레이터를 제작하였다. 제작된 매니퓰레이터의 순기구학과 역기구학을 해석하고 시뮬레이션을 수행하여 기구학을 검증하였다. 실제로 역기구학을 바탕으로 로봇 팔을 제작하여 제어하였다. 양팔의 동작 성능을 확인하기 위해 오른쪽 팔과 왼쪽 팔을 각각 따로 제어하여 서로 다른 경로를 추종하는 실험을 수행하였다. 실험결과를 통해 기구학 분석을 검증하였으며, 시스템의 동작 여부를 확인할 수 있었다.

• 한국정밀공학회지
• /
• 제14권4호
• /
• pp.104-109
• /
• 1997

A robust controller design to corrdinate a robot manipulator under unknown system parameters and bounded disturbance inputs is presented in this paper. Generally, robust controllers require high input torque so that they may face input saturation in actual application due to the power limitation of the actuator. To solve this problem, an improved robust controller with saturated input torque using a fuzzy logic control is proposed. Numerical examples are shown to validate the proposed controller using two degree-of-freedom planar arm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.169-171
• /
• 2006

This paper studies the step motors moved up-down and fore-back direction and deals with a position control and tracking the trajectory of the robot. For simulation and experiment, we demonstrate core part with usefulness and effectiveness.

• 한국전문물리치료학회지
• /
• 제27권1호
• /
• pp.11-18
• /
• 2020

Background: As technology has progressed, various robot-assisted devices have been developed to reduce therapists' labor and assist in therapy. However, due to their many limitations, it is more practical to use traditional mechanical devices. The grahamizer is one such traditional mechanical device used clinically to rehabilitate the upper extremities. No study has yet established the efficacy of the grahamizer in individuals with stroke. Objects: This study investigated the immediate change in arm reaching after the use of a grahamizer. Methods: Twenty-two stroke survivors participated in this study (11 males and 11 females). The reaching of the more-affected arm was measured three times using the three-dimentional electromagnetic motion tracking system "trakSTAR". After the first measurement, the subjects performed 500 rotatory arm exercises using the grahamizer. To assess the grahamizer's effect, the subjects were remeasured in the same way. Results: There were significant increases in the reaching distance (p < 0.05) and movement smoothness (p < 0.05) of the more-affected arm after using the grahamizer. Conclusion: Our study confirms that using the grahamizer is beneficial in the rehabilitation for improving movement of the more-affected arm in stroke survivors.