• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.150-153
• /
• 2002

The use of the finite element method for biomechanical analysis is increasing rapidly in recent years. Since biomechanical models are usually in very complex shapes, it takes a lot of time and efforts to build reasonable finite element models. In this paper, a new tetrahedral meshing algorithm from the series of 2-D computed tomography(CT) images has been proposed. In this scheme, the planar sections of three-dimensional objects and the side surfaces between two planar sections are triangulated first, and then an advancing front algorithm is employed to construct tetrahedral elements by using basic operators. A sample finite element model for thoracic vertebra is presented.

• Computational Structural Engineering
• /
• v.7 no.1
• /
• pp.125-134
• /
• 1994

Response variability of reinforced concrete frame subjected to material property randomness has been evaluated with the aid of the finite element method. The spatial variation of Young's modulus is assumed to be a two-dimensional homogeneous stochastic process. Young's Modulus of concrete material has been investigated based on the uiaxial strength of concrete cylinder. Direct Monte Carlo simulation method is used to investigate the response of reinforced concrete frame due to the variation of Young's modulus with the Neumann expansion method and the pertubation method. The results by three analytic methods are compared with those by deterministic finite element analysis. These stochastic technique may be an efficient tool for evaluating the structural safety and reliability of reinforced concrete structures.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.253-256
• /
• 1999

The Streamline Upwind Petrov-Galerkin(SUPG) finite element method is used to solve the two-dimensional laminar and turbulent flow. The flow is simulated by averaged Navier-Stokes equations with a penalty function approach and the lograithmic(k-$\varepsilon$) turbulent model is employed to take into account its turbulent behavior. The near-wall viscous sub-layer model is employed to approach the dominant viscous effects in the near wall zones. To find a good-enough initial guess of the Newton-Raphson iteration solving Nonlinear Matrix the Incremental method is considered for momentum and the Incomplete logarithmic turbu-lent equations for Turbulence. The validation of our method is investigated in comparision with published experimental data.

• Journal of Welding and Joining
• /
• v.29 no.4
• /
• pp.73-79
• /
• 2011

Friction stir welding (FSW) is a solid state joining method patented in 1991 by The Welding Institute (TWI). It is widely used for joining light metals such as Al and Mg alloys. Foreign railway vehicle manufacturing companies have been applying FSW to car body welding, but domestic companies are in the beginning of feasibility study. Therefore, lots of experimental and analytical study is needed. In this study, three-dimensional finite element modeling of the friction stir welding of two Al6061-T6 plates was carried out. And temperature field and residual stresses were obtained and compared to experimental results in the literature. It is found the analytic thermal field is in a good agreement with the experimental results, but there are some differences between numerical and experimental residual stresses.

• Proceedings of the KIEE Conference
• /
• 1998.11a
• /
• pp.22-24
• /
• 1998

The current distribution in the source coil region is analyzed using the two dimensional finite element method. The variables in the FEM are the magnetic vector potentials and the source current density. The boundary condition for the source current density is that the total current is the sum of the eddy current and the source current and is known quantity from measurement. The simulation results are compared with the analytical solution. It is found that the method can analyze the current distribution in the source conductors very accurately.

• Journal of Korea Water Resources Association
• /
• v.35 no.6
• /
• pp.677-684
• /
• 2002

In this study, a finite element model is employed to simulate the diffraction of waves caused by a change of water depths. The model is firstly applied to the estimation of reflection coefficients of monochromatic waves over a sinusoidally varying topography. Predicted coefficients are compared with those of the eigenfunction expansion method and laboratory measurements. A good agreement is observed. The model is then used to investigate effects of heights of bottom topography and number of ripples on variation of reflection coefficients of monocromatic water waves.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1992.03a
• /
• pp.27-46
• /
• 1992

In this study a new simplified three-dimensional numerical method and the associated computer program have been developed to simulate the non-axisymmetric extrusion processes. The two-dimensional rigid-plastic finite element method under the generalized plane-strain condition, is combined with the slab method. To define the die geometry for non-axisymmetric extrusion, area mapping technique was used. Streamlined die surface was used to miniminze the total extrusion pressure. Extrusion of square, hexagonal and "T" section from round billet have been simulated and experimented with a model material. The computed results were in good agreement with the experiments in cross-sectional grid distortion. Computational results will be valuable for designing tool geometries and corresponding processes.

• Computational Structural Engineering
• /
• v.8 no.1
• /
• pp.147-160
• /
• 1995

Based on the weighted residual concept[4], a three-dimensional plate theory is derived using a Fourier series expansion of a dependent variable and a weighted residual approximation of the basic elasticity equations. The weighted residual equilibrium equations of the plate are expressed in terms of weighted displaced quantities, and the results are then interpreted by means of a potential energy functional. The potential energy expression is used to develop a finite element implementation. For illustrative purposes, the application of the theory to a strip plate is considered and two numerical examples of a cantilever and a simply-supported strip plate are studied.

• Journal of Power System Engineering
• /
• v.14 no.5
• /
• pp.48-55
• /
• 2010

When a large ship is advancing in waves, ship undergoes the hydroelastic response, which has influences on structural stability and the fatigue destruction etc. of the ship. Therefore, to predict accurate hydroelastic response, it is necessary to analyze hydroelastic response including fluid-structure interaction. In this research, a ship is divided into many hull elements to calculate the fluid forces and wave exciting forces on each elements using three-dimensional source distribution method. The calculated fluid forces and wave exciting forces are assigned to nodes of hull elements. The neighbor nodes are connected with elastic beam elements. We analyzed hydroelastic responses, and those are formulated by using finite element method. Particularly, to estimate the influence of forward speed on the hydroelastic responses, we use two different methods : Full Hull Rotation Method(FHRM) and Sectional Hull Rotation Method(SHRM).

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10a
• /
• pp.183-186
• /
• 2003

A finite element-based, integrated process model is presented for a three dimensional, coupled analysis of the thermal and mechanical behavior of type 304 stainless slab during hot charge rolling (HCR) and cold charge rolling (CCR) processes. The validity of the proposed model is examined through comparison with measurements. The susceptibility on micro-crack initiation or propagation due to the thermal stress in these two different process conditions was examined. The model's capability of revealing the effect of diverse process parameters is demonstrated through a series of process simulation.