• Steel and Composite Structures
• /
• v.18 no.2
• /
• pp.325-344
• /
• 2015

Experimental tests on cellular beams with sinusoidal openings showed two main failure modes around the openings. They concern the formation of four plastic hinges and the local instability of the sinusoidal part of the opening. In parallel, numerical analysis of the sinusoidal part of the opening revealed the existence of an elastic rotational restraint between the intermediate web-post and the adjacent opening panel. The aim of the present study is to present an approach to quantify this rotational restraint. Through the response surface method, a mathematical model is proposed. It shows a great ability to predict the rotational restraint value as a function of the geometrical parameters of the opening. This model can be used to perform an extensive study with various geometrical configurations of beams with the aim to develop a reliable and realistic analytical model predicting the resistance of the sinusoidal openings.

• Journal of Plant Biology
• /
• v.27 no.2
• /
• pp.51-60
• /
• 1984

Jisimdo is an island where evergreen broadleaved forests are well preserved. Soil environments and forest structures of Jisimdo were investigated, and an actual vegetation map and profile diagrams were drawn out. The natural vegetation of Jisimdo was divided into two stand units, one was evergreen broadleaved forest and the other was Pinus thunbergii forest. 26 species were identified as evergreen broadoeaved trees, and among them, Camellia japonica was the dominont of the tree layer of evergreen broadleaved forest. Profile diagram shows that Camellia japonica, with average height of 7∼8m, formed lower tree layer, and laurels like Cinnamomum japonicum, Machilus thunbergii, and Neolitsea sericea formed upper tree layer. In Pinus thunbergii forest, plants of shrub and herb layers were abundant because of much light penetrated into the forest floor, and these layers were largely composed of evergreen broadleaved trees. This fact shows the possibility of succession from Pinus thunbergii forest into evergreen broadleaved forest. Jisimdo is geographically adjacent to Jangseungpo and Okpo, and this increases the economic value of Jisimdo as a place of public resort. It will be necessary from being destroyed by land development and human interferences.

• Earthquakes and Structures
• /
• v.16 no.6
• /
• pp.665-677
• /
• 2019

This study utilizes large-scale shake table test to investigate the seismic performance of an isolated bridge with lead rubber bearings crossing an active fault. Two transverse restraining systems with and without shear keys are tested by applying spatially varying ground motions. It is shown that the near-fault span exhibits larger bearing displacement than the crossing-fault span. Bridge piers away from the fault rupture are more vulnerable than those adjacent to the fault rupture by attracting more seismic demand. It is also verified that the shear keys are effective in restraining the bearing displacement on the near-fault span, particularly under the large permanent ground displacement.

• Korean Journal of Radiology
• /
• v.22 no.6
• /
• pp.970-982
• /
• 2021

Dual-energy CT (DECT) provides insights into the material properties of tissues and can differentiate between tissues with similar attenuation on conventional single-energy imaging. In the conventional CT scanner, differences in the X-ray attenuation between adjacent structures are dependent on the atomic number of the materials involved, whereas in DECT, the difference in the attenuation is dependent on both the atomic number and electron density. The basic principle of DECT is to obtain two datasets with different X-ray energy levels from the same anatomic region and material decomposition based on attenuation differences at different energy levels. In this article, we discuss the clinical applications of DECT and its potential robust improvements in performance and postprocessing capabilities.

• Korean Journal of Environmental Biology
• /
• v.41 no.4
• /
• pp.666-676
• /
• 2023

Laurencia is a red algal genus that was described by J.V. Lamouroux in 1813. The main characteristics of this genus have been known as the presence of four pericentral cells in an axial segment, secondary pit connections between adjacent epidermal cells, and the presence of corps en cerise in both epidermal and trichoblast cells. Additionally, the tetrasporangia are arranged in a parallel manner, and male branches feature terminal cup-shaped spermatangial pits. Currently, sixteen Korean Laurencia species have been reported based on their morphological characteristics. In this study, Laurencia decussata and L. pacifica have been added as new records to the Korean algal flora based on a combination of morphological observations and molecular analyses of rbcL sequences. Laurencia decussata has expanded from Australia and New Zealand to Korea, while the distribution of L. pacifica has expanded from USA and Mexico to Korea.

• Smart Structures and Systems
• /
• v.17 no.6
• /
• pp.981-994
• /
• 2016

Two field research stations based upon atmospheric corrosivity monitoring combined with reinforced concrete corrosion rate sensors have been established in Kuwait. This was established for the purpose of remote monitoring of building materials performance for concrete under Kuwait atmospheric environment. The two field research sites for concrete have been based upon an outcome from a research investigation intended for monitoring the atmospheric corrosivity from weathering station distributed in eight areas, and in different regions in Kuwait. Data on corrosivity measurements are essential for the development of specification of an optimized corrosion resistance system for reinforced concrete manufactured products. This study aims to optimize, characterize, and utilize long-term concrete structural health monitoring through on line corrosion measurement and to determine the feasibility and viability of the integrated anode ladder corrosion sensors embedded in concrete. The atmospheric corrosivity categories supported with GSM remote data acquisition system from eight corrosion monitoring stations at different regions in Kuwait are being classified according to standard ISO 9223. The two nominated field sites where based upon time of wetness and bimetallic corrosion rate from atmospheric data where metals and rebar's concrete are likely to be used. Eight concrete blocks with embeddable anodic ladder corrosion sensors were placed in the atmospheric zone adjacent to the sea shore at KISR site. The anodic ladder corrosion rate sensors for concrete were installed to provide an early warning system on prediction of the corrosion propagation and on developing new insights on the long-term durability performance and repair of concrete structures to lower labor cost. The results show the atmospheric corrosivity data of the environment and the feasibility of data retrieval of the corrosion potential of concrete from the embeddable sets of anodic ladder corrosion sensors.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.6
• /
• pp.531-539
• /
• 2017

This paper deals with the development of bonded joints for fibre reinforced plastic (FRP) hull structures using moulding-in concept. Focus is placed on bonded in-plane connections between two adjacent panels that could form the boundaries of hull structural module. Traditional construction in FRP hull structures requires the construction of a mould, usually from steel or aluminium. In this construction the FRP materials are laid in the mould, and resin is saturated, and then the structural member is cured. This is expensive since it involves the fabrication of metal hull mould for every different hull type, which is sacrificed after the production of the FRP ship. One way of encouraging greater use of FRP in ship construction is to investigate the possible construction of FRP hull structures in a similar manner to metallic ships, that is in terms of blocks or modules. Such a manner of construction would eliminate the need for expensive hull moulds permitting greater flexibility in the construction of FRP ships. The main issue then would be the design and construction of adequate bonded connections between adjacent panels. To fulfill this object, the simplified and automated way of manufacturing joint edge shapes for bonded joints is developed, and their structural assessment is performed in both experimentally and numerically.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.9
• /
• pp.2684-2688
• /
• 2014

Two two-dimensional cyanide- and phenoxo-bridged heterometallic M(II)-Mn(III) (M = Ni, Pd) coordination polymers $\{[Mn(saltmen)]_4[Ni(CN)_4]\}(ClO_4)_2{\cdot}CH_3OH{\cdot}H_2O$ (1) and $\{[Mn(saltmen)]_4[Pd(CN)_4]\}(ClO_4)_2{\cdot}CH_3CN{\cdot}H_2O$ (2) ($saltmen^{2-}$ = N,N'-(1,1,2,2-tetramethylethylene)bis(salicylideneaminato)dianion) have been obtained by using $K_2[M(CN)_4]$ as building blocks and a salen-tpye Schiff-base manganese(III) compound as assembling segment. Single X-ray analysis reveals their isostrutural cyanide-bridged $MMn_4$ pentanuclear cationic structure. The four Schiff base manganese units of the pentanuclear entity are self-complementary through the phenoxo oxygen atoms from the neighboring complex, therefore forming cyanide- and phenoxo-bridged 2D sheet-like structure. Investigation over magnetic susceptibilities reveals the overall ferromagnetic coupling between the adjacent Mn(III) ions bridged by the phenoxo oxygen atoms with J = 2.13 and $2.21cm^{-1}$ for complexes 1 and 2, respectively.

• Earthquakes and Structures
• /
• v.19 no.2
• /
• pp.119-128
• /
• 2020

In seismic design of a pylon supporting transmission lines in an overhead electricity transmission system, an estimation of the fundamental periods of the pylon in two orthogonal vertical planes is necessary to compute the seismic forces required for sizing pylon members and checking pylon deflections. In current practice, the fundamental periods of a pylon in two orthogonal vertical planes are typically obtained from eigenvalue analyses of a model consisting of the pylon of interest as well as some adjacent pylons and the transmission lines supported by these pylons. Such an approach is onerous and numerically inconvenient. This research focused on development of a simplified method to determine the fundamental periods of pylons. The simplified method is rooted in Rayleigh's quotient and is based on a single-pylon model. The force vectors that can be used to generate the shape vectors required in Rayleigh's quotient are presented in detail. Taking three pylons selected from representative overhead electricity transmission systems having different design parameters as examples, the fundamental periods of the chosen pylons predicted from the simplified method were compared with those from the rigorous eigenvalue analyses. Result comparisons show that the simplified method provides reasonable predictions and it can be used as a convenient surrogate for the tedious approach currently adopted.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.6C
• /
• pp.579-584
• /
• 2007

Recently various prediction structures have been proposed to exploit inter-view correlation among multi-view video sequences. In this paper, we propose a QP(quantization parameter) selection method for the B frame inserted in the first frames of each GOP(group of pictures), where we change QP for the B frame adaptively to achieve uniform picture quality and overall coding gain. Each B frame is coded with reference to two frames in its adjacent views. We calculate QP for the B frame based on the correlation between the two reference frames, calculated using their rate-distortion costs. By applying the proposed method to the MVC reference prediction structure, we have improved the coding gain by 0.09$\sim$0.16 dB.