• 한국항해항만학회지
• /
• 제40권6호
• /
• pp.353-360
• /
• 2016

IMO는 선박의 조종성능과 복원성능에 관한 국제적 기준 마련에 노력해 왔다. 이러한 움직임은 해상에서의 선박 안전 향상에 기여하였으며, 선박 연구자가 수행하는 학술적 연구의 방향에도 영향을 미쳤다. 기존의 수행된 선박 조종성능과 조종성능 연구는 각각 그 분야에서 독립적으로 수행되어 왔다. 두 분야의 상호 관계에 관한 연구는 미비한 실정이다. 이에 본 논문에서는 선박의 조종성능과 복원성능의 상호 관계를 정량적으로 규명하고자 기초적인 실험 연구를 수행하였다. 각 두 항목을 나타내는 지표로 복원성능은 GM 변화를 사용 하였고, 선박의 조종성능은 선회성능을 선택하여 이 두 지표의 상호관계에 관해 정량적인 분석을 시도하였다. 이를 위하여 자유 항주 모형선을 이용한 선회 실험을 실시하고, GM변화에 따른 선회 반경 및 선회 중 발생하는 최대 횡경사 각도의 변화를 분석 하였다. 실험 결과 GM에 따른 선회 반경 감소 및 초기 횡경사 증가의 경향이 서로 다르게 나타났다. 이를 이용하여, GM 감소에 따른 선회반경 및 초기 횡경사 변화 예측을 위한 개략적인 경향 추정식을 제안 하였다. 선박은 운항 중 예상하지 못한 원인으로 갑작스럽게 GM이 감소 할 수 있다. 본 논문에서 얻은 실험 결과는 GM감소량에 따른 선박의 선회반경 및 조타에 의한 횡경사 각도 변화 크기를 개략적으로 추정하기 위한 기초 자료로 활용 될 수 있을 것으로 기대된다.

• 대한한방내과학회지
• /
• 제41권5호
• /
• pp.811-820
• /
• 2020

Objective: The aim of this study was to report the effectiveness of traditional Korean medicine treatment of a gait disturbance in a patient with idiopathic normal pressure hydrocephalus induced by secondary Parkinsonism. Methods: The patient was treated with Korean herbal medicine (Yukmijihwang-tang-gami), acupuncture, moxibustion, and rehabilitation exercise. The gait of the patient was evaluated by the 10 m Walk Test, Timed Up and Go (TUG) test, 360° turning test, Functional Ambulatory Category (FAC), and GAITRite. Results: After 20 days of traditional Korean medicine treatment, we observed improvement in the symptoms of the gait disturbance. Conclusion: Traditional Korean medicine treatment might be effective in the treatment of gait disturbance in patients with idiopathic normal pressure hydrocephalus induced by secondary Parkinsonism.

• 종양간호연구
• /
• 제2권1호
• /
• pp.61-71
• /
• 2002

Gastric Carcinoma is very plentiful and significant disease in Korean community. The reason is that Gastric Carcinoma is not a simply finding disease with unclear symptoms for early detection. Early detection and early medical treatment of a cancer patient is an important instrument of reducing the mortility rate. The purpose of this study is to identify the effect of audiovisual information with videotape infulencing on knowledge and attitude of early detection of gastric carcinoma. The research design was a non-equivalent control group, pre-post test. The subjects of this study were 52 members of D-taxi drivers which was located in Pusan. The subjects were twenty six experimental group and twenty six control group. The experimental group was collected from January 15, 1999 to January 26, 1999. The control group was collected from the research was 28 minutes video program which was turning out the form of documentary on the based practical experience. And also the experimental tool was used measurung instrument which measured a dependent, variable throughout the consulatation of an percentage, average, standard deviation, ${\chi}^2-test$ and t-test using spss/pc program. The result of this research were as follows : 1)" The experimental group which was offered the video program, should be higher in knowledge of early detection of the gastric carcinoma than the control group" was supported. (t= -7.754, p=.000) 2) "The experimental group which was offered the video program, should be higher in attitude of the early detection of the gastric carcinoma than the control group" was supported. (t=-4.321, p=.000) Therefore, in conclusion, this study that the audiovisual information with videotape influencing on knowledge and attitude of early detection of gastric carcionma was very representational experience throughout the video of documentary form on the based practical experience was much effected the change of the knowledge and the attitude regarding to the early detection of the gastric carcinoma was verified.

• 대한교통학회지
• /
• 제19권6호
• /
• pp.143-160
• /
• 2001

본 연구에서는 국내 일부지역에 운영중인 첨단신호제어시스템(COSMOS)의 효율성을 평가할 수 있는 미시적(microscopic), 모의실험기(simulator)의 원형(prototype)을 개발하였다. 이 모의실험기의 개발은 원형적인 형성을 목표로 차량의 이동방식과 모듈적용체계 그리고 첨단신호알고리즘 중 독립교차로 실시간제어의 기능을 개발모형의 범위로 하였으며 구체적인 개발 사항은 다음과 같다. 첫째로, 기본적인 차량진행 외에 부가적인 첨단신호기능을 수행하기 위해서 검지기 체계를 통한 자료수집 및 지역제어기 그리고 센터시스템의 알고리즘의 수행이 필요하므로, 미시적 시뮬레이터의 가장 큰 문제점인 연산속도의 문제는 더욱 대두된다. 따라서 이러한 점을 개선할 수 있도록 소프트웨어적인 측면에서 차량의 이동방식을 공간중심방식으로 구성하여 진행시킬 것과 링크별로 각 수행모듈을 합리적으로 적용하도록 제안하였다. 그리고 차량추종 및 차로변경의 모형의 적용을 포함한 링크의 이원화 적용 제안이 타당한지를 평가하기 위하여 NETSIM모형과 비교를 실시하였다. 둘째로, 이러한 모의실험기의 구조를 기초로 개별차량의 검지자료 수집과 매 주기마다 주기 및 녹색시간을 결정하는 독립교차로 실시간 제어 알고리즘의 구현으로 첨단신호제어의 전략을 평가할 수 있는 가능성을 제시하였다. 마지막으로 독자적인 모의실험기로 발전할 수 있도록 Animation 기능과 다양한 효과척도를 산출하여 종합적인 연구를 수행하였다.

• Journal of Biosystems Engineering
• /
• 제43권4호
• /
• pp.311-319
• /
• 2018

Purpose: The aim of this study is to develop a small combine for harvesting miscellaneous cereal crops. Methods: A prototype small combine was designed and constructed. Its specifications and basic performance were investigated. Results: The prototype small combine for harvesting miscellaneous cereal crops was designed and constructed to reflect similar specifications as those of the conventional combine. The prototype small combine comprises a diesel engine with the rated power/speed of 22.0 kW/2,600 rpm, three-stage primary and two-stage speed range transmission shifts, and a double acting threshing part. The maximum travel speeds of the prototype combine are approximately 0.72 m/s, 2.50 m/s, 0.30 m/s at the low, high speed range shifts in the forward direction, and while traversing in the reverse direction, respectively. The minimum radius of turning was approximately 1.50 m. In a static lateral overturning test, the prototype combine overturned neither to the right nor to left on a $30^{\circ}$ slope. The results of an oilseed rape harvesting test included the maximum operating speed of 0.32 m/s, the grain loss ratio of approximately 9.0%, and the effective field capacity of approximately 10.3 a/h. Additionally, among the outputs in grain outlet, the whole grains, damage grains, and materials other than grain (MOG) ratios accounted for 97.4%, 0.0%, and 2.6%, respectively. Conclusions: The prototype small combine for harvesting miscellaneous cereal crops indicates good driving ability and stability. The results of the oilseed rape harvesting test reveal that the harvesting performance must be enhanced such that the separating and cleaning parts are more suitable for each type of crop, thus reducing grain loss and foreign substances among the outputs in grain outlet. An improved small prototype combine could be used effectively to mechanize the harvesting of miscellaneous cereal crops in small family farms or semi-mountainous areas.

• 대한조선학회논문집
• /
• 제59권6호
• /
• pp.423-431
• /
• 2022

In this paper, the results of Planar Motion Mechanism (PMM) test for a 1/15 scaled model of the MARIN Joubert BB2 submarine is dealt with to derive the maneuvering coefficients for surface condition. For the depth of surface navigation, the top of the sail was exposed 0.46 m above the water surface in the model scale, and it corresponds to 6.9 m in the full scale. The resistance and self-propulsion tests were conducted, and the model's self-propulsion point was obtained for 1.328 m/s, which corresponded to 10 knots in the full scale. The maneuvering tests were performed at the model's self-propulsion point, and the maneuvering coefficients were obtained. Based on the maneuvering coefficients, a turning simulation was performed for starboard 30 degree of stern fins. The straight-line stability and control effectiveness in the horizontal plane were analyzed using the maneuvering coefficients and compared with the appropriate range. For the analysis of the neutral fin angle of the X-type stern fin, the stern fin test with drift angles was carried out. As a result, the flow straightening effect at lower and upper parts of the stern fin was discussed.

• 한국생산제조학회지
• /
• 제22권5호
• /
• pp.865-870
• /
• 2013

In recent years, aluminum processing has been increasing in the aerospace, vehicle, airplane industries etc., because aluminum has abundant resources and has a high specific strength. Aluminum alloys have a high coefficient of thermal expansion therefore, it is necessary to consider the temperature problem in the cutting process. The objective of this research is to investigate the machinability of a hardened aluminum alloy Al7075-T6 by using cryogenic heat treatment. The machining test is conducted by comparing the cutting force and surface roughness, corresponding to various cutting conditions of depth of cut, cutting speed, and feed rate, with those of Al7075-T0.

• 한국기계가공학회지
• /
• 제17권2호
• /
• pp.60-67
• /
• 2018

Recently, environment-friendly cultivation technology is popular. A cultivator is useful for turning over the stall bedding in a poultry farm. In this study, a rotary-based cultivator with a rechargeable battery was developed for eco-friendly management of broiler chickens. From the results of the test run, the clustered stall bedding was approximately divided into up and down layers. Through experimental evaluation, the working width was more than 60 cm, and the noise was less than 80 dB. The output of the motor was 400 W, and the speed of rotation was 3000 rpm. Electric battery type cultivators are expected to be widely used in the livestock industry.

• 대한교통학회지
• /
• 제17권2호
• /
• pp.83-90
• /
• 1999

신호화 간선도로에서 연동신호계획의 효율성이 간선도로 교통운영의 핵심사안이다. 본 논문에서는 연동화 신호시간계획의 우수성을 평가하는 컴퓨터 알고리즘을 제시한다. 링크내에서 이동하는 차량군의 동적 특성과 옾셑값의 변화에 민감한 지체도의 산정이 수학모형의 중요부분이다. 개발되는 알고리즘의 이론적인 배경은 Michalopoulos의 해석적 모형에 기반을 두고 있는데, 이 모형을 다양한 교통조건이나 신호조건에 적용되도록 하는 실용화 과정이 본 논문에 기술되어 있다. 제시된 알고리즘에 대하여 옾셑값의 변화에 따른 지체도의 민감도 평가를 실시하였다. 평가를 통하여 본 알고리즘은 교통수요, 링크길이, 회전교통량비율과 같은 교통조건의 변화에 따라 적절한 민감도와 추정력을 보이는 것으로 판단되었다.

• Mycobiology
• /
• 제45권2호
• /
• pp.114-118
• /
• 2017

In September 2013 and 2014, a significant number of kenaf plants showing symptoms of leaf spots with approximately 50% incidence were found in experimental plots in Iksan and Namwon, Korea. Leaf spots were circular to irregular, more or less vein-limited, reaching to 10 mm in diameter. The spots were initially uniformly brown to reddish brown, turning pale brown with a purplish margin and showing grayish patches on the lesion due to heavy fructification. The causative agent of the leaf spot disease was identified as Cercospora malayensis. The pathogenicity test was conducted with similar results, which fulfilled Koch's postulates. This is the first report of C. malayensis infection of kenaf in Korea.