• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.47 no.4
• /
• pp.435-442
• /
• 2011

In an attempt to respond to the increase in international oil prices and reduce operating expenses, ship remodeling was carried out on a 740ton class tuna purse seiner. To strengthen the competitiveness of the fisheries industry by improving vessel performance, a bulbous bow was newly equipped. The slipway and rudder area were also lengthened and enlarged with the propeller and main engine remained unchanged. To reduce the hull resistance, a circle type bulbous bow was attached on the hull behind bow thruster and thus the cost for exchanging electrical equipment for bow thruster was reduced. The new rudder area was expanded 15% more than the old one within the extent that the existing mechanical control part and rudder stock were not changed. To prevent fishing net damage and stabilize wake field, slipway was lengthened to the optimal position. All of the new design of remodeling parts went through the model tests in towing tank and CWC. Besides resistance test, all of necessary model test results were delivered for hydrodynamic character for the modified ship. The maneuvering simulation to verify that the remodeled ship satisfies the IMO rules was performed in both zigzag and turning tests. The estimated resistance with new bulbous bow and lengthened stern was reduced by 4.8% in the 2-dimensional analysis and 17.4% in the 3-dimensional analysis in comparison of conventional ship. The average reduction of resistance was estimated about 10%. Maneuvering character of modified hull form was found to satisfy all regulations under IMO. The remodeling of tuna purse seiner can not only improve fishing performance but also contribute to reduction of operating cost by saving energy for the fisheries industry.

• Journal of Navigation and Port Research
• /
• v.28 no.10 s.96
• /
• pp.827-832
• /
• 2004

Up to now a lot of the study on ship collision avoidance systems have proceeded actively. However the rate of ship collision accidents hasn't decreased yet. If there is collision risk in close quarters situation in spite of maneuvering ship for collision avoidance according to the system, only use of TCP A and DCP A as input factor for collision risk decision is not useful to avoiding collision action. For the recent 5 years by the analysis of first observation distance about approaching ship in domestic collision accidents, nearly $45\%$ of accidents is close first observation less than 2 miles. Therefore it is essential part for safety navigations to study for collision avoidance action in close encounter. In this paper, as a fundamental study of supporting collision avoidance maneuvering for navigators, we proposed ship collision avoidance support model in close quarters situation through analysis qf collision accidents to effectively get rid of the causes.

• Journal of Ocean Engineering and Technology
• /
• v.35 no.3
• /
• pp.173-182
• /
• 2021

The maneuvering performance of a ship on the actual sea is very different from that in calm water due to wave-induced motion. Enhancement of a ship's maneuverability in waves at the design stage is an important way to ensure that the ship navigates safely. This paper focuses on the maneuvering prediction of a Russian trawler in wind and irregular waves. First, a unified seakeeping and maneuvering analysis of a Russian trawler is proposed. The hydrodynamic forces acting on the hull in calm water were estimated using empirical formulas based on a database containing information on several fishing vessels. A simulation of the standard maneuvering of the Russian trawler was conducted in calm water, which was checked using the International Maritime Organization (IMO) standards for ship maneuvering. Second, a unified model of seakeeping and maneuvering that considers the effect of wind and waves is proposed. The wave forces were estimated by a three-dimensional (3D) panel program (ANSYS-AQWA) and used as a database when simulating the ship maneuvering in wind and irregular waves. The wind forces and moments acting on the Russian trawler are estimated using empirical formulas based on a database of wind-tunnel test results. Third, standard maneuvering of a Russian trawler was conducted in various directions under wind and irregular wave conditions. Finally, the influence of wind and wave directions on the drifting distance and drifting angle of the ship as it turns in a circle was found. North wind has a dominant influence on the turning trajectory of the trawler.

• Journal of the Society of Naval Architects of Korea
• /
• v.57 no.5
• /
• pp.262-270
• /
• 2020

An outdoor free-running model test system was designed for assessing ship maneuverability with test uncertainty. The test model was a surface combatant of tumblehome hull geometry. The straight forward tests were conducted first to obtain the relationship between the propeller revolution rate and advance speed. During the outdoor tests, the propeller revolution rate to achieve a certain Froude number condition was higher than that in the indoor free-running model tests. Turning circle and zigzag tests for evaluating ship maneuverability criteria were carried out at the propeller revolution rate determined by the straight forward test results. The random and systematic standard uncertainties of maneuvering criteria were obtained by repeated tests and comparison with the indoor free-running model test results, respectively. The test uncertainty was largely dominated by the systematic standard uncertainty, while the random standard uncertainty was small with good repeatability.

• Journal of the Society of Naval Architects of Korea
• /
• v.59 no.3
• /
• pp.173-182
• /
• 2022

The present study suggests a procedure of establishing a ship dynamics modeling by regression of free-running model test results. The hydrodynamic force and moment of the whole model ship is derived from the low-pass filtered acceleration in the turning circle and zigzag maneuver tests. Force and moment of the propeller and rudder are separated from that of the whole ship to acquire the hull force and moment terms, based on the principles of the component model. The low-pass filter frequency is verified in prior to dynamics modeling, to find the threshold frequency of 2.5 Hz. The dynamics modeling of the hull is compared with the component modeling by captive model tests. Because of strong correlation between sway velocity, yaw angular velocity, and heel angle, each maneuvering coefficient is not able to be validated, but the whole modeling shows good agreement with the captive model tests.

• Journal of the Society of Naval Architects of Korea
• /
• v.59 no.5
• /
• pp.262-270
• /
• 2022

The emergence of new concept ships, such as autonomous ships, has drawn much attention on the manoeuvrability of ships because of the safe navigation and operation of ships. Although the manoeuvrability of KRISO Container Ship(KCS) has been frequently reported, there have been few documents of representative manoeuvre cases conducted in various methods by one institute. This paper presents the manoeuvrability of the ship in 1/42.0 model scale by 3 methods: free running model tests, horizontal planar motion mechanism tests, and computational fluid dynamics analysis. KRISO reports KCS manoeuvre data: 35° turning circle tests and 20/20(10/10) zigzag manoeuvring tests. In addition, a simple formula for integrating and comparing manoeuvre indices, Manoeuvrability Comparing Simple Index(MCSI), is proposed.

• Journal of Navigation and Port Research
• /
• v.43 no.6
• /
• pp.420-428
• /
• 2019

Although marine structures are a risk factor interfering with the passage of ships, there are no obvious guidelines on the required safety distance between ships and marine structures under regulations and laws. In this study, the width of the shipping route width was set based on the AIS data to analyze the separation distance between marine structures and ships, and the ships were classified by the length of each ship. By analyzing the distribution at marine structures, this study confirmed that the ships' traffic volume was in the form of normal distribution. To statistically analyze the separation distance between the traffic distribution results and the normal distribution of ships in this study, the traffic pattern analysis around the marine structures was performed. As a result, the traffic pattern was different by length and the recommended safety distance for each length is presented accordingly. Referring to the IMO (International Maritime Organization) the standard turning circle and reference of safety separation distance between ships and offshore wind turbines of the CESMA (Confederation of European Shipmasters' Associations) and P IANC (World Association for Waterborne Transport Infrastructures), the analysis was conducted on ships that did not follow the set distance among the AIS data by setting the distance within the recommended ship safety distance to 5-7 overall length. As a result, the 5.5 length over all of the safety recommendations were selected as appropriate, and based on the above results, the two cases recommending ship safety distance were proposed.

• Journal of the Korean Society of Costume
• /
• v.57 no.3 s.112
• /
• pp.37-52
• /
• 2007

Dan(緞) is satin damask. It was a newly popularized fabrics in the Joseon Period and is one of main traditional fabrics at present. The purpose of this study is to suggest a theoretical basis to name Dan(緞) remains properly by comparing and analyzing the name, pattern, usage, feature, length and width, value of Dan(緞) recorded on documents made at the end of the Joseon Period. The results of this study are as follows. 1. The kinds of Dan(緞) recorded on documents made at the end of the Joseon Period are various. Among fabrics named Dan(緞), were not only silk fabrics but also cotton fabrics, woolen fabrics, mixture fabrics with silk and cotton, and mixture fabrics with cotton and wool. 2. Some newly revealed patterns in the case of Dan(緞) are as follows. The shape of Byeolmun(別紋) is assumed to have originated from that of character symbolizing the Royal Family and developed into a variety of circular ones of dragon, phoenix, flower, or character. O-ho-ro-mun(五葫蘆紋) was five-gourd-shaped patterns that form a circle, turning their narrow mouth to the center, and vines between each two gourds. 3. When considering the usages of Dan(緞), Dan(緞) was used for various detailed usages according to their kinds. But it was't mostly used for underwear. 4. Features have been examined are Godan(庫緞), Mobondan(模本緞), Handan(漢緞), Daedan(大緞), Yangdan(洋緞), Waedan(倭緞), and Geumdan(錦緞). 5. The length and the width of 1 Pil(疋) silk fabrics are various. It is normal for the width being different, but for 1 Pil(疋)'s length being different is very unusual. The width of Dan (緞) was about 47-76.20cm, it was wider than Ju(紬), Cho, Gyeon(絹), Sa(紗), Ra(羅) and Reung(綾). 6. As for the value of each fabric per $10,000cm^2$, Dan(緞) was the most valuable silks at that time. Among them the most valuable Dan(緞) was Udan(羽緞).

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.14 no.1
• /
• pp.45-54
• /
• 2008

"Summer Deadweight Tonnage(SDWT)" is used as the criteria of the berthing capacity when establishing port entry limits under current guideline. The important factors affecting to the maximum ship size of possible berthing are mass, length and breath of the ship rather than deadweight. Therefore this guideline should be modified to ensure safety and efficient operation of berth. This study aimed to propose a rational guideline to adjust the berthing capacity. In order to decide proper berthing capacity, three berths of Port of Ulsan were selected and systematic evaluations for the safety of passage transit, berthing maneuvers, ship motions at berth and stabilities of structures were conducted. Small changes of ship size had little effect on those characteristics and little significant differences were found according to the increase of ship size at the same displacement. The evaluation results of the increasement of 50% of berthing capacity at 20,000 DWT, 25% at 40,000 DWT and 13% at 150,000 DWT were within the design criteria in which the berths were built. Therefore, if the channel width, diameter of turning circle, berth length and mooring arrangements are satisfied with the criteria, the current berth limitations should be adjusted by the displacement. as substitute for the deadweight.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.5
• /
• pp.800-808
• /
• 2022

The International Maritime Organization adopted the interim standards for ship maneuverability in November 1993 for preventing collision of ships at sea and for protecting the marine environment, and based on the accumulated data, in December 2002, the established standards for ship maneuverability were adopted. However, the standards adopted are those at full load, even keel, and at least 90 % of the ship speed at 85 % of the ship's maximum power. Moreover, these standards have limitations in providing information on maneuverability under actual navigational conditions. Therefore, in this study, frequency analysis AHP analysis techniques were studied by consulting navigational officers, captains, and experts, who have significant knowledge on ship maneuverability, utilization of the current standards, and the information necessary for the operation of the actual ship. The results of this study confirmed that the necessary information on maneuverability for the navigational officer operating the vessel is information about the turning circle at a small angle of 5°-10° and z-test information at maneuvering speed, not sea speed. Additionally, in relation to speed control, additional information on deceleration inertia and acceleration inertia is needed than the information on the stopping ability at sea speed and full loaded condition. The derived results are considered to be useful as basic data for preparing guidelines for ship maneuverability necessary for navigational of icers who operate ships.