• 제목/요약/키워드: tunnel linings

검색결과 90건 처리시간 0.022초

시편형상에 따른 강섬유보강 콘크리트의 휨인성평가방법 (Toughness Evaluation of Steel Fiber Reinforced Concrete to Spiecimen Types)

  • 류종현;김진철;한승환;이상돈;안태송
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2001년도 가을 학술발표회 논문집
    • /
    • pp.341-344
    • /
    • 2001
  • Fiber reinforced shotcrete(FRS) is widely used in tunnel linings, which strengthen the rock surface and reduce the loosening of the rock strata. The advantages of FRS in tunnel linings are the unsusceptibility to crack, the benefit of shotcrete strength, and the superiority of toughness. In this study, the several evaluation methods of FRS toughness were investgated experimentally, which included the ASTM beam test, EFNARC square panel test and RTA round panel test. Especially, it was examined that the round panel test could fulfill the toughness evaluation of FRS.

  • PDF

Numerical modeling of coupled structural and hydraulic interactions in tunnel linings

  • Shin, J.H.
    • Structural Engineering and Mechanics
    • /
    • 제29권1호
    • /
    • pp.1-16
    • /
    • 2008
  • Tunnels are generally constructed below the ground water table, which produces a long-term interaction between the tunnel lining and the surrounding geo-materials. Thus, in conjunction with tunnel design, the presence of water may require a number of considerations such as: leakage and water load. It has been reported that deterioration of a drainage system of tunnels is one of the main factors governing the long-term hydraulic and structural lining-ground interaction. Therefore, the design procedure of an underwater tunnel should address any detrimental effects associated with this interaction. In this paper an attempt to identify the coupled structural and hydraulic interaction between the lining and the ground was made using a numerical method. A main concern was given to local hindrance of flow into tunnels. Six cases of local deterioration of a drainage system were considered to investigate the effects of deterioration on tunnels. It is revealed that hindrance of flow increased pore-water pressure on the deteriorated areas, and caused detrimental effects on the lining structures. The analysis results were compared with those from fully permeable and impermeable linings.

전기비저항탐사를 이용한 터널라이닝 누수조사 연구 (A Study on leakage monitoring of tunnel linings using the electric resistivity survey)

  • 신종호;신용석;윤종열;김호종
    • 한국터널지하공간학회 논문집
    • /
    • 제10권3호
    • /
    • pp.257-267
    • /
    • 2008
  • 우리나라에서 흔히 채택하고 있는 배수형 터널은 배수시스템 열화 혹은 수압작용에 따라 누수가 발생하는 문제점을 내포하고 있다. 누수는 소량일 경우 외관으로 드러나지 않아, 육안으로 확인할 단계가 되면 이미 라이닝 손상 혹은 설비에 영향을 미치는 상황이 되어 초기에 인지하고 대책을 마련하는 것이 매우 중요하다. 그러나 운영 중인 배수터널의 누수거동을 확인하기 위해서는 터널을 훼손하여 배면을 조사하여야 하는데, 이는 터널 유지관리상 허용되기 어렵다. 본 연구에서는 비파괴 물리탐사법인 전기비저항 탐사법을 이용하여 터널의 방수막을 훼손하지 않고, 누수여부를 파악하는 새로운 시도를 하였다. 모형 라이닝을 제작하여 습윤정도, 혹은 열화에 따른 누수거동을 탐사한 결과 전기비저항 탐사법이 라이팅 배수기능모니터링 혹은 누수조사에 유용하게 활용될 수 있음을 확인하였다. 또한 이 방법은 라이닝 누수 보수공사 후, 추가 누수여부의 조사 및 보수공사 점검에도 유용하게 활용될 수 있음을 보였다.

  • PDF

영구 숏크리트 터널 라이닝 구축을 위한 고성능 숏크리트 개발 (용수부에서의 조강시멘트와 alkali-free급결제 적용 검토) (Development of high performance shotcrete for permanent shotcrete tunnel linings (Application of high-early strength cement with alkali-free accelerator in spring water condition))

  • 박혜균;이명섭;김재권
    • 한국터널지하공간학회 논문집
    • /
    • 제5권1호
    • /
    • pp.23-31
    • /
    • 2003
  • 최근 NATM 터널 현장타설 콘크리트 라이닝의 시공성 향상과 균열에 따른 유지관리비 절감을 위해 양질 암반의 배수형 터널 시공에 있어서는 숏크리트만으로 라이닝을 대체하려는 영구지보 개념의 터널시공 (Single-Shell Tunnel, NMT 등)이 세계적으로 증가하고 있는 추세이다. 이러한 영구지보 개념의 터널 시공을 위해서는 고성능 숏크리트의 개발이 선결되어야 하며, 이러한 목적에서 본 논문에서는 조강시멘트와 최근 주목받고 있는 환경친화적인 alkali-free 급결제의 조합을 통해 고성능 숏크리트의 개발 가능성을 확인하였다. 그 결과, 보통시멘트(OPC)를 사용한 숏크리트보다 약 25%의 높은 초기강도를 확보하였으며, 용수부에서도 뛰어난 부착특성을 확인할 수 있었다.

  • PDF

원심모형실험을 이용한 주문진 표준사 지반내 알루미늄 모형 터널 복공의 역학적 거동에 관한 연구 (Analysis of the Structural Behaviours of Aluminum Tunnel Lining in Joomunjin Standard Soil by Centrifugal Model Tests)

  • 김택곤;김영근;박중배;이희근
    • 터널과지하공간
    • /
    • 제9권2호
    • /
    • pp.114-130
    • /
    • 1999
  • 최근 들어 노후화 터널 및 시공불량의 원인으로 결함이 발생하여 시공이후에 라이닝이 제기능을 발휘하지 못하여 보수, 보강, 심지어 재시공되는 사례가 발생하고 있어 이에 대한 역학적 거동 분석의 필요성이 제기되고 있다. 본 연구에서는 100G(G : 중력가속도)까지의 원심모형실험(centrifuge)을 실시하여 몇몇 라이닝들의 역학적 거동을 분석하였다. 이를 위해 강사기 (sand rainer)를 이용하여 평균적으로 상대밀도 86% 주문진 표준사 지반을 작성하였으며, 이 때 평균 정지토압계수는 평균 0.39로 나타났다. 원심모형실험의 토피 대 터널 높이비는 3으로 설정하였으며, 라이닝 재료로서 알루미늄을 이용하여, 천단부 및 어깨부 배면공동, 천단두께부족, 무인버트, 측벽결함 라이닝을 제작하여, 각종 센서로부터 라이닝 원주변형률, 휨모멘트, 축력, 라이닝토압, 지중토압, 지표침하를 계측 및 분석하였다.

  • PDF

터널 내 화재발생에 대한 콘크리트 세그먼트 라이닝의 내화성 평가 및 내화방법에 대한 고찰 (Review of fire resistance evaluation and fire resistance method of concrete segment lining for fire in tunnel)

  • 손무락;천주현;조영근;김범주
    • 한국터널지하공간학회 논문집
    • /
    • 제25권2호
    • /
    • pp.121-139
    • /
    • 2023
  • 도로, 지하철, 철도 등의 다양한 터널이 건설 및 운행 중에 있다. 터널구조물의 구조적 안정을 위해 다양한 형태의 라이닝이 이용되고 있으며 특히 TBM터널 공사에서는 콘크리트 세그먼트 라이닝이 주로 설치되고 있다. 본 논문에서는 터널 내 화재가 발생할 시 터널내 구조물인 콘크리트 세그먼트 라이닝에 미치는 영향 및 관련기준, 내화성 평가 및 내화방법에 대해서 문헌조사를 통해 조사하고 관련내용을 제시하였다. 이를 통해 실무자가 터널화재에 대한 콘크리트 세그먼트 라이닝의 안전을 확보하는데 정보를 제공하고자 하였다.

Numerical investigation of segmental tunnel linings-comparison between the hyperstatic reaction method and a 3D numerical model

  • Do, Ngoc Anh;Dias, Daniel;Oreste, Pierpaolo
    • Geomechanics and Engineering
    • /
    • 제14권3호
    • /
    • pp.293-299
    • /
    • 2018
  • This paper has the aim of estimating the applicability of a numerical approach to the Hyperstatic Reaction Method (HRM) for the analysis of segmental tunnel linings. For this purpose, a simplified three-dimensional (3D) numerical model, using the $FLAC^{3D}$ finite difference software, has been developed, which allows analysing in a rigorous way the effect of the lining segmentation on the overall behaviour of the lining. Comparisons between the results obtained with the HRM and those determined by means of the simplified 3D numerical model show that the proposed HRM method can be used to investigate the behaviour of a segmental tunnel lining.

쉴드터널 콘크리트 라이닝의 내화특성 (Fire-Resistance Characteristics of Shield Tunnel Concrete Linings)

  • 박해균;이명섭;전상은;박동규
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
    • /
    • pp.32-35
    • /
    • 2004
  • In recent years a number of catastrophic tunnel fires, the Euro tunnel, the Mont Blanc tunnel, the Tauem tunnel and the Gotthard tunnel, have occurred and inflicted serious damages to European countries. If a fire occurs in shield tunnels, the reinforced concrete segment linings playing as an important structural member is expected to damage severely and finally can be caused the collapse of tunnel. The purpose of this study is to evaluate the performance of concrete segment lining under heat exposure and to obtain information to assist a new technical approach to fighting fires in tunnels. In order to evaluate the fire-resistance performance of concrete segment by adding Polypropylene fibers, fire tests using the RABT heat-load curve is carried out. The temperature rise of this curve is very rapid up to $1200^{\circ}C$ within 5 minutes, and duration time of the $1200^{\circ}C$ exposure is 55 minutes. From the fire test, it was found that the explosive spalling was rapidly reduced by adding polypropylene fibers and this method is considered as an effective fireproof material to upgrade fire safety in tunnels economically.

  • PDF

터널 라이닝에 작용하는 합리적인 잔류수압 적용방안 검토 (A study for application plan of rational residual water pressure on the tunnel linings)

  • 정국영;김지엽;김지훈;문훈기
    • 한국터널지하공간학회 논문집
    • /
    • 제13권6호
    • /
    • pp.463-499
    • /
    • 2011
  • 지중에 건설되는 터널은 대부분 지하수위 하부에 위치하므로 지하수 처리문제는 터널의 장기운영에 있어 매우 중요하다. 배수형 터널의 경우 수리기능이 원활하면 라이닝에 수압이 작용하지 않으나 장기 운영으로 인해 배수시스템의 열화가 진행되면서 라이닝 배면에 잔류수압이 작용할 수 있다. 본 연구에서는 배수재 및 배수공 폐색 조건에 따른 터널에 작용하는 수압분포를 ICFEP프로그램을 활용하여 수치해석적으로 고찰하고 현재 적용중인 잔류수압과의 비교 분석을 통해 라이닝에 작용하는 합리적인 잔류수압 적용 방안을 검토하였다.

NATM 터널라이닝 종방향 균열 제어공법 (The control method for axial cracks on NATM tunnel linings)

  • 정수매;박인준
    • 한국터널지하공간학회 논문집
    • /
    • 제11권4호
    • /
    • pp.437-447
    • /
    • 2009
  • 국내외의 수많은 NATM 터널시공 보고서 및 연구로 부터 라이닝 콘크리트에서 재래공법 보다 많은 균열이 발생한다는 것을 쉽게 찾을 수 있다. 그러므로 본 연구에서는 터널 라이닝의 종방향 균열제어 및 방지를 위하여 새로운 공법을 제안 하였으며 제안공법의 효율성을 판단하기 위하여 개별요소법을 이용하여 분석하였다.