• Membrane Journal
• /
• v.14 no.3
• /
• pp.218-229
• /
• 2004

We prepared monodispersed calcium alginate microspheres by controlling various conditions of emulsification procedure using a lab-scale batch type membrane emulsification system equipped with SPG (Shirasu porous glass) tubular membranes. We determined the effects of process parameters of membrane emulsification (ratio of dispersed phase to continuous phase, alginate concentration, emulsifier concentration, type and concentration of stabilizer, transmembrane pressure, concentration of crosslinking agent, stirring speed and membrane pore size) on the mean size and size distribution of alginate microspheres. The increase of the ratio of dispersed phase to continuous phase, transmembrane pressure and alginate concentration led to the increase in the mean size of alginate microspheres. On the contrary, the increase in emulsifier concentration, stirring speed of the continuous phase and concentration of the crosslinking agent caused the reduction of the mean size of microspheres. Through controlling these parameters, monodisperse alginate microspheres with about $6{\mu}{\textrm{m}}$ of the mean size and 1.1 of the size distribution value were finally prepared in case of the using SPC membrane with the pore size of $2.9{\mu}{\textrm{m}}$.

• Membrane Journal
• /
• v.14 no.4
• /
• pp.329-338
• /
• 2004

In this study the discharged wastewater from paper manufacturing plant was filtrated by 4 kinds of tubular ceramic microfiltration and ultrafiltration membranes (carbon material) with periodic water-back-flushing, and we tried to find the optimum back-flushing time (BT). As results of water-BT effect for each ceramic membrane, the longer BT was more effective for a membrane having the larger pore size. And we could acquire the most volume of total permeate and the highest recovery efficiency of purified water, Then, the results of permeate flux vs. initial permeate flux during 180 min's operation showed that the longer BT was more effective for longer filtration time (FT) to obtain the higher permeate flux because membrane fouling proceeded deeply at long FT condition. And the optimum BT that founded from the trends of membrane fouling resistances almost accorded with the optimum BT from the trends of permeate flux, too.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.17 no.4
• /
• pp.371-375
• /
• 1988

Tubular ultrafiltration membranes were used to investigated mass transfer characteristics of waste cheese whey. The effects of bulk concentration and flow velocity on permeat flux, mass transfer coefficient and apparent rejection coefficient were measured. Mass transfer coefficient was increased linearly with increasing flow velocity, and following relationship between mass transfer coefficient(k) and linear velocity(u) was obtained. $k=0.87{\times}10^{-5}u^{1-1}$ It is interjecting to note that plots for all linear velocity tend to converge to the same point for zero permeating flux, and the maximum bulk concentration that can be achieved with cheese whey extracts was 38(w/v %). In general, membrane rejection coefficient increased with increasing flow velocity and the rejection coefficients of cheese whey solution and that of lactose in cheese whey solution were obtained $0.40{\sim}0.65$, $0.15{\sim}0.30$, respectively.

• Membrane and Water Treatment
• /
• v.15 no.1
• /
• pp.21-29
• /
• 2024

1H,1H,2H,2H-perfluorodecytriethoxysilane (C₁₆H₁₉F₁₇O₃Si) be successfully applied to the hydrophobic modification of Al₂O₃ tubular ceramic membrane. Taking the concentration of modification solution, modification time, and modification temperature as factors, orthogonal experiments were designed to study the hydrophobicity of the composite membranes. The experiments showed that the modification time had the greatest impact on the experimental results, followed by the modification temperature, and the modification solution concentration had the smallest impact. Concentration of the modified solution 0.012 mol·L^-1, modification temperature 30 ℃ and modification time 24 h were considered optimal hydrophobic modification conditions. And the pure water flux reached 274.80 kg·m^-2·h^-1 at 0.1MPa before hydrophobic modification, whereas the modified membrane completely blocked liquid water permeation at pressures less than 0.1MPa. Air gap membrane distillation experiments were conducted for NaCl (2wt%) solution, and the maximum flux reached 4.20 kg·m^-2·h^-1, while the retention rate remained above 99.8%. Given the scarcity of freshwater resources in coastal areas, the article proposed a system for seawater desalination using air conditioning waste heat, and conducted preliminary research on its freshwater production performance using Aspen Plus. Finally, the proposed system achieved a freshwater production capacity of 0.61 kg·m^-2·h^-1.

• Applied Microscopy
• /
• v.6 no.1
• /
• pp.21-32
• /
• 1976

The origins and the functions of the multi vesicular bodies and the various structures of the membranes related to the cytolysomes were studied in the mycelium cells of Rhizopus nigricans, Aspergillus niger and A. ochraceus, in the hymenium and basidium cells of Agricus bisporus sand Rhizopogon rubesecens, in the cells of assimilation tissue of Marchtantia polymorpha and Pogonalum inflexum and in the mesophyll cells of Pteridium aqiulinum, Pinus densiflora, Ginkgo biloba and Panax ginseng fixed with glutaraldehyde-paraformaldehyde-$ OsO_4$. In Rhizopus nigricans, Aspergillus niger, A. ochraceus, Agricus bisporus sand Rhizopogon rubescens, the concentric multilamellar, multivesicular, myelin-vesicle-tubular and concentric parallel-lamellar complexes were originated from the plasmalemma, while in Marehantia polymorpha, Pogonatum inflexum, Pteridium aquilinum, Pinus densiflora, Ginkgo biloba and Panax ginseng, they were originated from plasmalemma and the cytoplasm. The structures originated from the plasmalemma may be grouped into multi vesicular body and myelin-like structure, both forming the secondary vacuoles or protruding into the central vacuoles and finally degrading, In some cases, endoplasmic reticulum within the cytoplasm encloses some part of the cytoplasm to form a circle where the membranous lamellae increase in number, while the enclosed cytoplasm decrease to be eventually replaced by the multilamellar structure which is released into the vacuoles and subsquently degraded. The structures originated from the cytoplasm are believed to be the cytosegresomes or cytolysomes closely related to the differentiation of the vacuoles. The possible fate of these structures are also discussed.

• Applied Microscopy
• /
• v.39 no.2
• /
• pp.73-80
• /
• 2009

The plastid inclusion has long been known to exist in leaves of numerous plant species, especially in those of flowering plants. Among the inclusions, crystalline bodies are the most frequently distinguished structures of the foliar plastids, however, microtubules and phytoferritins are also reported occasionally. The crystalline inclusions vary in shape, and are located either in the stroma or within intrathylakoidal spaces, whereas microtubules and phytoferritins are more uniform in shape and are formed in the stroma. In crystalline structures, the composing elements exhibit a lattice pattern and/or paralleled tubules that are either bounded by membranes or exist without membrane enclosing. Other types of inclusions have not been shown to be enclosed by any membranous structures. According to the current survey, the plastid inclusion, with the exception of phytoferritins, has been shown to exhibit a crystalline or tubular pattern, and has been reported in more than 56 species of various families. Their occurrence is not restricted to any photosynthetic pathway, but is found to be randomly distributed among C-3, C-4 and CAM species, without phylogenetic relationships. The progress in plastid inclusion research reveals more information about the function and complexity, but the need for characterizing the 3-D structure of the crystalline inclusions also has been acknowledged in previous studies. A 3-D characterization would utilize tilting and tomography of serial sections with appropriate image processing that would provide valuable information on the sub-structures of the crystalline inclusions. In fact, recent studies performed on 3-D reconstruction of the plastid inclusions revealed important information about their comprising elements. In this article, the crystals and microtubules that have been reported in various types of plastids have been reviewed, with special consideration given to their possible sub-cellular function within the plastids.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.2
• /
• pp.197-206
• /
• 2006

This study evaluated the effect of ultrasonic irradiation on improving the flux and cleaning efficiency in membrane process which is widely applied for the treatment of landfill leachate. The experiments on improvement of membrane flux according to the types of membranes(hallowfiber microfiltration, MF and tubular ultrafiltration, UF) were performed with changing frequency($40{\sim}120$ kHz), intensity ($200{\sim}500$ W) and irradiation time of ultrasound as well us operation pressure($0.1{\sim}2.3kg/cm^2$). Membrane was fouled for the first 50 min with primary treated leachate and then the change in flux according to ultrasonic irradiation period was observed for 70 min. Parameters influenced to the recovery ratio corresponding the net flux on pure water and to the enhancement ratio applied after ultrasonic irradiation on the flux were analyzed. In same condition, the flux was improved in proportion to ultrasonic intensity while the improvement of flux was inversely proportional to ultrasonic frequency. The cleaning effect of membrane was delayed and reduced when operation pressure of membrane was high. The recovery ratio and enhancement ratio for $0.1{\mu}m$ MF membrane were 10% and 500%, respectively while those were maximized at $75{\sim}98%\;and\;40{\sim}50%$ for UF membrane for 10,000 and 100,000 MWCO, respectively. In conclusion, it was confirmed that ultrasonic cleaning using mechanical vibration is alternative to water or chemical cleaning for improving membrane flux.

• Applied Microscopy
• /
• v.29 no.4
• /
• pp.437-450
• /
• 1999

Bile canaliculi are the structure delivering bile secreted by hepatocytes into the bile passage. Bile secretion is mainly controlled by the cytoskeletal elements, mainly of actin in the microvilli, pericanalicular web. Most studies on the bile secretion have been done in viva situation, however, to control the various parameters in vitro culture system seem to be more useful. To set up an in vitro experimental system, the investigator isolated hepatocytes with an enzymatic method using a mixture of collagenase and hyaluronidase from normal Sprague-Dawley rat liver and cultured. Isolated hepatocytes were round and formed cords in culture. Microvilli covered the whole surface of hepatocytes. Bile canaliculi were formed between hepatocytes and were characterized by the presence of microvilli of various lengths and shapes mainly arising from small surface mounds. Actin filament core in the microvilli and pericanalicular actin web were incomplete. After cytochalasin D treatment, cultured hepatocytes were round but the surface were irregular with surfacen blebs, folds and grooves. Microvilli on the surface were scarce. Bile canaliculi were markedly dilated often with the detached junctional complexes. Bile canaliculi lacks microvilli almost completely and extended into the pericanalirular cytoplasm showing complex vacuolar and tubular structures by transmission electron mciroscopy. Pericanalicular actin web, intermediate filaments were hardly identified. Subsurface actin filaments were scattered scarcely under the cell membranes. These results suggest that hepatocytes isolated from rats can survive and form bile canaliculi in culture and the actin filaments are involved in the formation and/or maintenance of the bile canaliculi.