• 제목/요약/키워드: tubing

검색결과 248건 처리시간 0.024초

증기발생기 전열관 2차측 응력부식균열의 실험실적 모사 방법 (Laboratorial technique for fabrication of outer diameter stress corrosion cracking on steam generator tubing)

  • 이재민;김성우;황성식;김홍표;김홍덕
    • Corrosion Science and Technology
    • /
    • 제13권3호
    • /
    • pp.112-119
    • /
    • 2014
  • In this work, it is aimed to develop the fabrication method of axial stress corrosion cracking (SCC) defects having various sizes, on the outer diameter surface of the steam generator (SG) tubings. To control the length of the artificial SCC defect, the specific area of the SG tubing samples was exposed to an acidic solution after a sensitization heat treatment. During the exposure to an acidic solution, a direct current potential drop (DCPD) method was adopted to monitor the crack depth. The size of the SCC defect was first evaluated by an eddy current test (ECT), and then confirmed by a destructive examination. From the comparison, it was found that the actual crack length was well controlled to be similar to the length of the surface exposed to an acidic solution (5, 10, 20 or 30 mm in this work) with small standard deviation. From in-situ monitoring of the crack depth using the DCPD method, it was possible to distinguish a non-through wall crack from a through wall crack, even though the depth of the non-through wall crack was not able to be precisely controlled. The fabrication method established in this work was useful to simulate the SCC defect having similar size and ECT signals as compared to the field cracks in the SG tubings of the operating Korean PWRs.

MATERIAL RELIABILITY OF Ni ALLOY ELECTRODEPOSITION FOR STEAM GENERATOR TUBE REPAIR

  • Kim, Dong-Jin;Kim, Myong-Jin;Kim, Joung-Soo;Kim, Hong-Pyo
    • Nuclear Engineering and Technology
    • /
    • 제39권3호
    • /
    • pp.231-236
    • /
    • 2007
  • Due to the occasional occurrences of stress corrosion cracking(SCC) in steam generator tubing(Alloy 600), degraded tubes are removed from service by plugging or are repaired for re-use. Since electrodeposition inside a tube does not entail parent tube deformation, residual stress in the tube can be minimized. In this work, tube restoration via electrodeposition inside a steam generator tubing was performed after developing the following: an anode probe to be installed inside a tube, a degreasing condition to remove dirt and grease, an activation condition for surface oxide elimination, a tightly adhered strike layer forming condition between the electro forming layer and the Alloy 600 tube, and the condition for an electroforming layer. The reliability of the electrodeposited material, with a variation of material properties, was evaluated as a function of the electrodeposit position in the vertical direction of a tube using the developed anode. It has been noted that the variation of the material properties along the electrodeposit length was acceptable in a process margin. To improve the reliability of a material property, the causes of the variation occurrence were presumed, and an attempt to minimize the variation has been made. A Ni alloy electrodeposition process is suggested as a primary water stress corrosion cracking(PWSCC) mitigation method for various components, including steam generator tubes. The Ni alloy electrodeposit formed inside a tube by using the installed assembly shows proper material properties as well as an excellent SCC resistance.

폐쇄식 흉관삽관술에 관한 임상적 고찰 (Clinical Study on Closed Thoracotomy)

  • 이종수
    • Journal of Chest Surgery
    • /
    • 제18권4호
    • /
    • pp.822-834
    • /
    • 1985
  • Reexpansion of the lung is the most desirable method of filling the pleural space whether it`s contents may be, and closed thoracotomy connected to a water-seal drainage remains the basic therapeutic modality in the treatment of the problems of the pleural space. We usually used rubber mushroom tubes, size No. from 16 to 34 Fr., and performed closed thoracotomy after preliminary thoracentesis to determine the exact depending position. Author reviewed 576 cases of closed thoracotomy which were performed in the Department of Thoracic and Cardiovascular Surgery, Pusan National University Hospital, since Jan., 1980 to June, 1984. The results were as follows: 1. The age distribution was 10 days to 76 years old and mean age of the patients was 36.6 year, and the most prevalent age group was twenties, and sex predisposition was male dominant, 86.9%. 2. The most common etiologic disease group was pneumothorax and the most common etiologic disease was traumatic hemothorax. 3. Sites of tubing were predominantly at posterior axillary line, 7th intercostal space and midclavicular line, 2nd intercostal space even though frequent presence of free pleural space. The two sides, right and left difference of occurrence rate was more frequent at right side, 51.2%. 4. Usually the durations of tubing was less than 10 days, 52.6%, and the number of tubes used to the same patient concomitantly was one, 73.9%, and the time of tubing to the same patient was 1st, 83.6%. 5. The common symptom and sign were dyspnea, 50.0%, chest pain, 30.7%, cough, 10.7%, fever, 6.5%. Especially, fever and cough was the most common symptom and sign in pyogenic empyema, 59.3%. 6. The common etiologic lesions of pneumothorax were blebs and bullae, 73.3%, and of pyogenic empyema was pneumonia, 69.0%. 7. The complication rate of closed thoracotomy was 26.0%. Among these complications, infection was 44.7%, and intercostal neuralgia was 25.3%. 8. 70.9% of all patients recovered with only closed thoracotomy and the rest of patient needed additional some necessary managements such as open thoracotomy [Blebectomy, Resection, Pleurodesis, Decortication, Bleeding control], open drainage, thoracoplasty and so on to have successful results.

  • PDF

자기포화 와전류기법에 의한 자성 튜브 비파괴검사 (Nondestructive Examination of Ferromagnetic Tube Using Magnetic Saturation Eddy Current Technique)

  • 이희종;조찬희;송석윤;지동현;정지홍
    • 비파괴검사학회지
    • /
    • 제28권5호
    • /
    • pp.407-415
    • /
    • 2008
  • 원전 발전소 터빈계통을 구성하는 열교환기 튜브는 일반적으로 구리합금, 스테인리스강, 탄소강, 티타늄합금 등의 재질로 제작된다. 이들 재질중에서 페라이트계 type-439 스테인리스강은 자성 재질로서 오스테나이트계보다 더 높은 열전달율 가지며, 부식에 의해 유발되는 결함에 대해 더 높은 저항성을 가진다. 페라이트계 스테인리스강은 보통 발전소 열교환기의 저압급수가열기와 습분분리재열기에 사용된다. 저압급수가열기는 일반적으로 두께가 얇은 type-439 스테인리스강을 이용하는 반면에 습분분리재열기는 더 두꺼운 핀튜브를 사용한다. 이와 같이 터빈 습분분리재열기 튜브로 사용되는 type-439 스테인리스강 핀튜브는 터빈계통의 운전으로 인하여 손상이 발생할 수 있다. 손상에 의한 가장 대표적인 결함은 진동에 의해 발생할 수 있는 마모, 피로균열 등이며 마모성 결함은 일반적으로 튜브-튜브지지판에서 발생되는 것으로 보고되고 있다. 본 연구에서는 type-439 스테인리스강 자성체 튜브에 발생할 수 있는 결함을 검출하고 크기를 측정할 수 있는 자기포화 와전류탐상검사 기법의 능력을 평가하였다.

튜빙의 종류에 따른 환원황화합물들의 흡착손실 비교 연구 (Comparative Study on the Adsorptive Loss of Reduced Sulfur Compounds (RSC) by the Selection of Tubing Materials)

  • 김기현;안지원;최여진
    • 한국지구과학회지
    • /
    • 제26권7호
    • /
    • pp.668-673
    • /
    • 2005
  • 대기환경 중에 존재하는 여러 가지 가스상 성분들을 채취 및 이송시키고자 할 때, 다양한 종류의 튜빙을 사용한다. 이와 같은 튜빙의 사용과 연계된 여러 가지 오차를 분석하기 위해, 악취황 성분들을 이용한 비교분석을 시도하였다. 이를 위해 45cm 길이로 6가지 재질의 튜빙을 선택하여, 각 튜빙별 손실특성을 평가하고자 하였다. 이를 위해, 10ppb 농도의 표준시료를 준비하고, 이를 튜빙에 통과시켜 준 후, 튜빙을 통과한 전후에 검출되는 농도를 비교하는 방식으로 손실율을 산출하였다. 이러한 비교의 목적상, 환원황 성분에 가장 우수한 회수율을 보이는 Silco Steel 튜빙을 통과한 결과를 기준 검량선으로 설정하고 여타 튜빙에 대한 회수율을 비교하였다. 그 결과 Teflon 튜빙에서는 4가지 황화합물 모두 $90\%$ 이상의 높은 회수율을 보일 정도로 양호한 결과를 보였다. 이에 비해 스테인레스나 브래스 재질의 경우, 저분자 황성분에 해당하는 H2S, CH3SH에서 상당한 손실을 보였다. 반면 실리콘 튜빙의 경우, 고분자 성분에 해당하는 DMS, DMDS에서 큰 손실을 보였다. 결과적으로 황화합물의 종류나 튜빙의 재질에 따라 RSC의 손실은 다양한 형태로 나타나는 것을 확인할 수 있다.

인위적으로 열화된 황색절연링형 금속플렉시블호스의 패턴 및 특성 (Patterns and Characteristics of Corrugated Stainless Steel Tubing for a Yellow Insulation Ring Type by Artificially Deteriorated)

  • 이장우;최충석
    • 한국화재소방학회논문지
    • /
    • 제32권6호
    • /
    • pp.1-6
    • /
    • 2018
  • 본 논문은 배관용으로 사용되고 있는 황색절연링형(yellow insulation ring type) 금속플렉시블호스(CSST)를 인위적으로 열화(deterioration)시켜 소손되었을 때의 특성을 분석하는데 있다. 배관용 CSST는 튜브, 보호피막, 너트, 황색절연링, 패킹(packing), 이음쇠(socket)로 구성되어 있다. 그리고 튜브와 이음쇠 접속은 기밀성과 절연성능 향상을 위해 황색절연링과 고무 패킹을 사용한 것으로 판단된다. 실험에서 얻은 데이터를 95% 신뢰 구간에서 검증한 결과 AD (Anderson-Darling)는 0.945, P값은 0.015로 해석되었다. 배관용 CSST의 실험 데이터는 신뢰성이 있다는 것이 확인되었다. 가스 토치에 의해서 소손된 CSST의 산술적 평균 절연저항은 $16.7k{\Omega}$으로 가장 컸으며, 전기적인 소손을 입은 CSST는 상대적으로 가장 낮은 $208{\Omega}$, 정상 제품은 $1.72k{\Omega}$으로 분석되었다. 그러므로 화재 현장에서 수거한 CSST의 절연저항 값을 분석하면 소손 원인 판정에 활용할 수 있을 것이다. 또한, 대전류공급장치(PCITS)로 CSST에 최대 전류 97 A를 약 5 s 동안 흘린 결과 보호피막 및 절연링은 정상 제품과 차이가 없었으나 금속 튜브의 일부에서 용융이 형성된 것을 확인할 수 있었다.

라이프케어 증진을 위한 동적탄력튜빙 보행훈련이 뇌졸중 환자의 균형에 미치는 영향 (Effect of Dynamic Tubing Gait Training for Life-Care on Balance of Stroke Patients)

  • 이선영;이동률
    • 한국엔터테인먼트산업학회논문지
    • /
    • 제15권1호
    • /
    • pp.171-180
    • /
    • 2021
  • 본 연구는 라이프케어 증진을 위한 동적탄력튜빙 보행훈련(Dynamic Tubing Gait, DTG II)이 만성 뇌졸중 환자의 균형에 미치는 영향을 알아보았다. 본 연구는 10명의 만성 뇌졸중 환자를 대상으로, DTG II 프로그램을 일일 30분씩 1회, 주 5회, 5주간 총 25회 실시하였다. 균형향상을 위한 DTG II 프로그램의 효과를 알아보기 위해 표면근전도(배바깥빗근, 척주세움근, 엉덩허리근, 큰볼기근), 골반 3축의 대칭지수 검사(경사, 대각선, 회전), 동적보행지수 검사(DGI)를 중재 전과 후에 시행하였다. 본 연구의 결과, 초기디딤기와 중간디딤기에서 큰 볼기근의 중재 전·후 비교에서 통계적으로 유의한 차이를 보였다(p<.05). 골반의 대칭지수(SI)는 대각선 SI와 회전 SI에서 중재 전·후 비교에서 통계적으로 유의한 차이를 보였다(p<.05). 동적보행지수(DGI)에서 중재 전·후 비교에서 통계적으로 유의한 차이를 보였다(p<.05). 본 연구결과를 통해 라이프케어 증진을 위한 DTG II 프로그램이 만성 뇌졸중 환자의 몸통근육의 근활성과 골반의 대각선 움직임과 회전 움직임의 대칭성을 향상시킴으로써 만성 뇌졸중 환자의 동적 균형 능력을 향상된 것을 알 수 있었다. 따라서 만성 뇌졸중 환자의 라이프케어 증진을 위한 균형능력 향상을 위해 동적탄력튜빙 보행훈련을 중재법의 하나로 권장한다.