• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.2
• /
• pp.253-261
• /
• 1987

Thermoacoustic oscillation of an air column induced by heated wires is investigated analytically and experimentally. Acoustic power generation from a single heater wire is estimated based on the result of heat transfer analysis and expressed in terms of the efficiency factor indicating the conversion efficiency from heat to acoustic energy. It is shown that the efficiency factor becomes maximum when the wire radius is the order of the coustic boundary layer thickness and the flow velocity is close to the thermal diffusion velocity. Onset condition of the column oscillation is obtained by equating the acoustic power generation at the heater to the power loss due to thermoviscous dissipation at the tube wall and the convection and radiationloss at the open ends of the tube. In estimating the acoustic power generation, the heater is treated as a stretched single wire by correcting the flow velocity to take into account the interactions between adjacent heater wires. Experiment is performed by using a spiral heater of 1mm diameter in an air column of 37mm diameter. The heat input to drive the oscillation is measured and compared with the theoretical prediction. A good agreement is found between the theory and experiment, which is regarded as a substantial verification of the present analysis.

• Nuclear Engineering and Technology
• /
• v.42 no.4
• /
• pp.450-459
• /
• 2010

The present paper investigates the collapse pressure of cylinders with intermediate thickness subjected to external pressure based on detailed elastic-plastic finite element (FE) analyses. The effect of the initial ovality of the tube on the collapse pressure was explicitly considered in the FE analyses. Based on the present FE results, the analytical yield locus, considering the interaction between the plastic collapse and local instability due to initial ovality, was also proposed. The collapse pressure values based on the proposed yield locus agree well with the present FE results; thus, the validity of the proposed yield locus for the thickness range of interest was verified. Moreover, the partial safety factor concept based on the structural reliability theory was also applied to the proposed collapse pressure estimation model, and, thus, the priority of importance of respective parameter constituting for the collapse of cylinders under external pressure was estimated in this study. From the application of the partial safety factor concept, the yield strength was concluded to be the most sensitive, and the initial ovality of tube was not so effective in the proposed collapse pressure estimation model. The present deterministic and probabilistic results are expected to be utilized in the design and maintenance of cylinders subjected to external pressure with initial ovality, such as the once-through type steam generator.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.191-191
• /
• 2022

Heterostyly continues to fascinate evolutionary biologists interested in heredity, evolution, breeding, and adaptive function. Polymorphism demonstrates how simply inherited developmental changes in the location of plant sexual associations can have important consequences for population pollination and mating biology. In contrast to homozygous self incompatibility, only a small number of mating phenotypes can be maintained in the population because insect pollinators have limitations in achieving multiple segregation sites for pollen deposition. Field studies of pollen tube growth have shown that reciprocal style-stamen polymorphisms function to increase the capacity of insect-mediated cross-pollination. The genetic pattern of style morphs is well established in various taxa, but despite recent advances, the identity, number, and structure of the genes controlling the heteromorphic syndrome have been poorly elucidated. The phenomenon of heterostyly in buckwheat has been controlled by gene complex concentrate to S-locus. Homomorphic autogamous buckwheat strains were established by the interspecific hybridization. Backcrossing of this line to the common buckwheat (pin) and selecting homostylar progenies made it possible to introduce the self-compatible gene into common buckwheat. In the result, we obtained the BC₉F₂ generation, and defined the strong linkage between flower type and self-incompatibility by microscopic observation of pollen tube growth. This finding suggests that self-incompatibility character is not controlled by one gene. Moreover, we defined the strong linkage between flower type and self-incompatibility. It strongly supports the S supergene theory. Therefore, we have plan to elucidate the heterostyly self-incompatibility by using molecular genetics, proteome analysis and apply to exploitation of buckwheat improvement. In near future, the expression of heterozygous syndromes in genus Fagopyrum with single isolated heterozygous species may provide clues to early stages of polymorphic assembly and shed light on evolutionary models of heterozygous strains.

• Steel and Composite Structures
• /
• v.49 no.5
• /
• pp.487-502
• /
• 2023

In the realm of nanotechnology, the nonlocal strain gradient theory takes center stage as it scrutinizes the behavior of spinning cantilever nanobeams and nanotubes, pivotal components supporting various mechanical movements in sport structures. The dynamics of these structures have sparked debates within the scientific community, with some contending that nonlocal cantilever models fail to predict dynamic softening, while others propose that they can indeed exhibit stiffness softening characteristics. To address these disparities, this paper investigates the dynamic response of a nonlocal cantilever cylindrical beam under the influence of external discontinuous dynamic loads. The study employs four distinct models: the Euler-Bernoulli beam model, Timoshenko beam model, higher-order beam model, and a novel higher-order tube model. These models account for the effects of functionally graded materials (FGMs) in the radial tube direction, giving rise to nanotubes with varying properties. The Hamilton principle is employed to formulate the governing differential equations and precise boundary conditions. These equations are subsequently solved using the generalized differential quadrature element technique (GDQEM). This research not only advances our understanding of the dynamic behavior of nanotubes but also reveals the intriguing phenomena of both hardening and softening in the nonlocal parameter within cantilever nanostructures. Moreover, the findings hold promise for practical applications, including drug delivery, where the controlled vibrations of nanotubes can enhance the precision and efficiency of medication transport within the human body. By exploring the multifaceted characteristics of nanotubes, this study not only contributes to the design and manufacturing of rotating nanostructures but also offers insights into their potential role in revolutionizing drug delivery systems.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1982.05a
• /
• pp.13.2-14
• /
• 1982

Otitis media with effusion, described first by Politzer (1867), is closely related with the function of auditory tube, but its etiology and pathogenesis are not clearly defined yet. There are many theories about its pathogenesis including hydrops ex vacuo theory which was most reliable nowadays. In this paper, using cats in experimental animals, hydrops ex vacuo theory was proved and cytological study of the effusion and light microscopic observation of the middle ear mucosa in otitis media with effusion were done. The results were as follows: 1) The effusion was found in all experimental groups after eighteen hours of the auditory tube obstruction. 2) In the cytological study of effusion by smear technic, Polymorpholeukocytes were dominant in earlier days but monoculear cells were soon increased and no eosinophils were found. 3) In the culture of the effusion, no bacteria was cultured. 4) By opeating microscope, hypertrophy of the middle ear mucosa observed especially in the fourteen days after auditory tube obstruction and effusion was most remarkable in the fourteen days, also. 5) By light microscopy, there were epithelial hyperplasia, proliferation of goblet cells, capillaries and infiltration of inflammatory cells which showed same distribution as smear technic.

• Journal of the Korean Vacuum Society
• /
• v.22 no.3
• /
• pp.111-118
• /
• 2013

The influence of gas flow on the plasma generation in the atmospheric plasma jet is described with the theory of hydrodynamics. The plasma discharge is affected by the gas-flow streams with Reynolds number (Re) as well as the gas pressure with Bernoulli's theorem according to the gas flow rate inserted into the glass tube. The length of plasma column is varied with the flow types such as the laminar flow of Re<2,000 and the turbulent flow of Re>4,000 as it has been known in a general fluid experiments. In the laminar flow, the plasma column length is increased as the increase of flow rate. Since the pressure in the glass tube becomes low as the increase of flow velocity by the Bernoulli's theorem, the breakdown voltage of plasma discharge is reduced by the Paschen's law. Therefore, the plasma length is increased as the increasing flow rate with the fixed operation voltage. In the transition of laminar and turbulent flows, the plasma length is decreased. When the flow becomes turbulent as the flow rate is increasing, the plasma length becomes short and the discharge is shut down ultimately. In the discharge of laminar flow, the diameter of plasma beam exposed on the substrate surface is kept less than the glass diameter, since the gas flow is kept to the distinct distance from the nozzle of glass tube.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.6
• /
• pp.91-107
• /
• 2020

The purpose of this study is to explore quantitatively the success factors of YouTube's music cover channel. Along the process, constructing and testing the measurement for music cover channel's characteristics. The research constructed the measurement items based on results of qualitative studies. To perform the purposes the study suggest a research model which integrated the Post Acceptance Model with five music cover channel's characteristics based on the recent case studies. The five characteristics were contents, video, creator, interactivity, and publicity. The characteristics were integrated with Post Acceptance Model. After testing reliability and validity the research model was revised then, the research hypothesis was tested. The research results show: first, it was found that the content characteristics did not meet the expected value of users. Second, among the five factors of channel characteristics presented in creator's characteristics have the largest effect on user's value perception Third, in the factor analysis process, the content factor and the video were loaded on the same factor thus integrated as one factor. Fourth, satisfaction and intention for continual usage were also loaded on the same factor thus integrated as one factor. The research results suggest that music cover channel operators need to enhance the creator's attraction, communication with user, and publicity in various ways.

• Journal of the Korean Society of Floral Art and Design
• /
• no.41
• /
• pp.93-114
• /
• 2019

The purpose of this study is to analyze the characteristics and problems of the content of flower design education videos on YouTube and to search for improvement direction. The subjects of analysis were 129 pieces of videos uploaded in the last one year including 'craftman floral design' as a search term. The result shows that contents covered were practical lectures, theory lectures, test related tips, job and character introduction, test work, educational guidance and publicity. The production format could be divided into studio lecture, classroom lecture, video feature, interview, Vlog, and television program. The hub-type programming strategy that periodically uploads the videos satisfying the target audiences' interests is mostly applied. The type of lecture covered 'practical skill test' got a good response from the users. Overall, content diversity, interaction between creators and users, and harmonious programming strategies are lacking. In order to improve this, it is necessary for emotional and expressive creators to pioneer differentiated fields and practice based on actual field. The introduction of interactive elements such as games and quizzes and the application of new media technologies such as VR and AR are worth trying. Three strategic types of 'hero', 'hub', and 'how to' should be applied complementary. As the demand for education content related to flower design is expected to expand in the future, it is required to develop content that can be used in various platforms, foster professional creators, and develop associated business models.

• Geotechnical Engineering
• /
• v.13 no.6
• /
• pp.95-106
• /
• 1997

A pressuremeter is an expandable tube which is placed in the soil, and then expanded under controlled condition against the soil. From this test a pressure expansion curve of the soil can be obtained. However soil disturbance during the test has significant influence on the results of tests. A general governing equation for pressuremeter test can be theoretically derived on the basis of the hyperbolic soil model and the cavity expansion theory. The curve fitting technique was used to establish the pressure-strain curve without disturbance of soil during testing. This interpretation makes use of both the loading and unloading portions of the test. An interpretation methodology is described and illustrated with pressuremeter test data carried out in the weathered granitic soil to estimate initial shear modulus. Standard penetration test is a very common site investigation technique in Korea. Therefore the blow counts of standard penetration test are discussed by comparing them with initial shear modulus.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.7
• /
• pp.552-560
• /
• 2014

Pulse Detonation Engine(PDE) has been investigated as a next generation propulsion system with the advantages of the higher thermal efficiency by the compression effect and the wide operation ranges from zero speed at ground. In the present study, an efficient theoretical PDE performance prediction program was developed for realistic propellants based on the Endo's theory combining the Chapman-Jouguet detonation theory and expansion process of burnt gas in a constant area tube. The program was validated through the comparison with the experimental data obtained by a ballistic pendulum measurement. PDE performance analyses were carried out for various hydrocarbon fuels and oxidizer compositions by changing the mixture equivalence ratio and initial conditions. Theoretical PDE performance database could be established as a result of the analyses.