• 비파괴검사학회지
• /
• 제20권1호
• /
• pp.1-9
• /
• 2000

본 연구에서는 유도초음파를 이용하여 열 교환기와 증기발생기 튜브의 결함을 비파괴적으로 탐상하고 그 크기를 산정하였다. 이론적인 해석을 위해 인코넬 (Inconel) 튜브에 대한 위상 및 군속도 분산선도를 Longitudinal 모드와 Flexural 모드에 대해 구하였다. 튜브의 원주방향 레이저노치와 튜브 지지대 하단의 방전가공결함(EDM wear)을 각각 비대칭 및 대칭 탐촉자 세트를 사용하여 탐상하였다. 실험결과 방전가공결함은 L(0, 2), L(0, 3), L(0, 4) 모드로 탐상되었으며, 그 중 L(0, 4) 모드가 결함으로부터 가장 잘 반사되었다. 레이저노치의 경우에는 L(0, 1) 모드 주변의 Flexural 모드가 결함을 탐상하고 크기를 산정하는데 사용될 수 있음을 보였다.

• 제어로봇시스템학회논문지
• /
• 제2권3호
• /
• pp.236-241
• /
• 1996

This paper presents a new eddy current testing system for inspecting tubes of steam generator in nuclear power plant. The proposed system adopted embedded expert system concept to automate tasks of the inspection such as inspection planning and flaw signal interpretation, and integrated all the tasks into a client/server type computing architecture using database management system. Therefore, human factor errors occurred during inspection could be minimized and the inspection data could be transferred in real-time. As a result, we can increase the level of inspection confidence and the productivity of a personal inspector. A prototype of the proposed system has been developed for 5 years and the test operation has been performed in domestic nuclear power plants.

• 비파괴검사학회지
• /
• 제9권1호
• /
• pp.98-105
• /
• 1989

Detection of creep damages in centrifugally cast HK-40 reformer furnace catalyst tube is a common problem for the safety and scheduled operation of chemical plants. This study was focused on the development of an automatic ultrasonic scanning device with which the creep damage of welded zone of HK-40 reformer tubes is detected and evaluated.

• 한국동물위생학회지
• /
• 제35권4호
• /
• pp.269-273
• /
• 2012

A confirmatory serological test, the standard tube agglutination test (STAT) is evaluated for the diagnostic efficiency in brucellosis Korea. A total of 345 bovine samples were collected from regional veterinary branch under national brucellosis monitoring program from January 2010 to June 2012 in Korea. These samples were diagnosed as suspected serum and brucellosis positive by the Rose Bengal test (RBT) and the STAT, respectively. The STAT was compared and evaluated with three serological test such as the indirect-enzyme linked immunosorbent assay (I-ELISA), competitive-enzyme linked immunosorbent assay (C-ELISA) and fluorescence polarisation assay (FPA) prescribed for international trade by OIE. Among the 345 bovine serum samples, 302 (87.5%) were diagnosed as positive in the STAT, while 215 (62.3%), 223 (64.6%) and 194 (56.2%) serum samples were diagnosed as positive for brucellosis in the I-ELISA, C-ELISA and FPA, respectively. The STAT showed quite high positive results as compared with three prescribed tests of OIE. FPA, I-ELISA and C-ELISA have shown 60.6%, 64.9% and 67.2% correlation, respectively as compared to the STAT. However correlations of three prescribed tests ranged high 84.1~97.7%. Especially, correlation between I-ELISA and C-ELISA is quite high, 97.7%. These results suggest that the STAT has shown many false-positive reactions. Therefore, additional serological test, such as ELISAs and FPA, would be necessary to adopt as a confirmatory test in the national surveillance program of bovine brucellosis in Korea.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2006년 추계학술발표대회 개요집
• /
• pp.38-40
• /
• 2006

Nuclear power plants are urged to reduce operating and maintaining costs to remain competitive as well as to increase the safety preventing the radioactive material to the atmosphere. To reduce the cost and to increase the safety, the inspection of balance-of-plant heat exchanger becomes important. However, there are some problems for plugging the heat exchanger tubes since the criterion and its basis are not clearly described. The codes and standards related to show the tube plugging criteria may not exist currently. In this paper, a method to establish the tube plugging criteria of BOP heat exchangers is introduced and the tube plugging criteria for the non-regenerative heat exchanger in the steam generator blow-down system of nuclear power plant. This method relies on the similar method used to establish the plugging criteria for the steam generator tubes.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.29-31
• /
• 2007

In this paper we propose an directional analytic approach in image data space for X-ray image which is detected from the X-ray projection system. Such a radiographic nondestructive testing has long been used for steel-tube inspection and weld monitoring. The welded area and thickness of steel-tube are detected from gradient radiating mechanism based on the evaluation of biased X-ray source position. The welded area is an ellipse type on low contrast X-ray image including noise. Noise originates from most of elements of the system. such as shielding CCD camera, imaging screen, X-ray source, inspected object, electronic circuits and etc.. Projection incorrectness and noise influence on imaging quality is to be represented by vertical pixels' distribution. Space analysis due to vertical direction also shows the segmental possibility between regions by visual edge evaluation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.32-34
• /
• 2007

The X-ray projection system has long been used for steel-tube inspection and weld monitoring. The thickness of tubes and welded areas is based on the evaluation of radiographic shadow projections. The traditional tangential measurement estimates the distance of border lines of the projected wall shadows of a tube onto a radiographic image detector. The detected image in which although there is a variety of noise may be sectioned into several partitions according to its specific blocks. Imaging noise originates from most of elements of the system, such as shielding CCD camera, imaging screen, X-ray source, inspected object, electronic circuits and etc. The tangential projection incorrectness and noise influence on imaging quality. In this paper we first sectionalize the X-ray image on the basis of vertical contrast difference. And next functional and statistic analysis are carried on at each region. Geometrical distance and unsharpness of the edge caused by visual evaluation uncertainties are also discussed.

• 동력기계공학회지
• /
• 제12권1호
• /
• pp.58-65
• /
• 2008

A method to test thin-walled tubes by guided ultrasonic wave is reported. The principle is that applicate two types of axially symmetric ultrasonic tube modes and "longitudinal" modes with particle displacement, which is coupled in axial and radial directions for transverse failures and torsional modes, oscillating in the circumferential direction only, for longitudinal failures. Both types of modes propagate along the tube in the axial direction. Therefore, a pulse-echo technique is possible. The pulses are excited and received at one end of the tube without contact electro-dynamic transducers. As soon as the tubes is put into a transducer coil at one end, the test of the whole tube can be accomplished in a few milliseconds. It is not necessary to rotate and transport the tubes during the test.

• KEPCO Journal on Electric Power and Energy
• /
• 제5권1호
• /
• pp.33-38
• /
• 2019

화력발전은 국내 발전량 중 가장 높은 비율을 차지하고 있으며, 그 중 석탄보일러 발전이 가장 높은 비율을 차지하고 있다. 석탄보일러는 석탄 연소 중 유해 물질 및 미세먼지가 발생하여 대기오염에 심각한 영향을 미친다. 이에 친 환경 석탄보일러로 유동층보일러가 도입 되었으며, 이는 유동매체를 활용하여 기존의 석탄보일러보다 약 1/10정도 적은 오염물질을 배출한다. 수냉벽튜브는 이 유동층보일러에서 중요한 역할을 하는 구조물로, 유동층보일러의 특성상 기존의 보일러보다 외벽손상이 심하다. 하지만 아직까지 이에 대한 정량적인 유지보수 기법이 없다. 원격장 와전류 탐상은 튜브형태의 내, 외벽 검사에 많이 사용되는 비파괴평가 기법으로, 비접촉이며 빠른 검사가 장점이다. 하지만 원격장 와전류 탐상은 본래 배관 내부에서 진행하는 검사이며, 수냉벽튜브는 특성상 내부 진입이 불가능하다. 이에 본 연구에서는 시뮬레이션을 활용해 유동층보일러 수냉벽튜브에 적합한 외부 원격장 와전류 탐상 센서에 대한 설계를 진행하고, 시뮬레이션을 수행하였으며, 기존 원격장 와전류 탐상과 유사한 신호를 얻음으로써 추후 실제 제작 될 원격장 와전류 탐상 센서에 대한 기준을 제시하였다.

• 비파괴검사학회지
• /
• 제27권5호
• /
• pp.442-448
• /
• 2007

원전 취약부위의 하나인 증기발생기 전열관의 확관/천이영역을 초음파로 검사하기 위한 장치를 개발하고 모의결함 시험편 및 자연결함 시험편을 이용하여 그 성능검증을 수행하였다. 10% 이상의 깊이를 가지는 모의결함은 모두 검출 가능했으며 20% 이상의 깊이를 가지는 모의결함은 그 크기도 재현성 있게 측정할 수 있었다. 순차적인 깊이를 가지는 모의결함을 이용한 실험결과 표준편차 3.27로 비교적 재현성 있는 결과를 얻었다. 자연결함을 포함하고 있는 시편을 이용한 실험결과, 결함의 진행 형태가 검출능에 영향을 미침을 알 수 있었고 결함의 깊이방향 형태가 비교적 잘 반영되므로 결함 단면 면적을 측정할 수 있는 가능성을 타진할 수 있었다.