• PNF and Movement
• /
• v.7 no.2
• /
• pp.1-10
• /
• 2009

This research measures the conditions of spinal scoliosis of college students and analyses the factors that affect spinal scoliosis. From September 15, 2008 to October 30, 2008, the study was conducted with 142 C College students and measured the degrees of spinal scoliosis. The analysis was evaluated according to the Pneumex Analysis program. The collected data was compiled into statistics using the SPSS PC+ 12.0 program. The results were as follows: 1. It appeared that in the cases of C curve, reverse C curve, S curve, and the normal, there was a statistical significance(p=.010) between the conditions of spinal scoliosis of the two genders. 2. It appeared that the comparison among the three groups according to the characteristics of the subjects showed a statistical significance in spinal length(p=.000) in the C curve group, age(p=.019) and spinal length(p=.004) in the reverse C curve group, and spinal length (p=.035), difference in apparent leg length(p=.019), and difference in true leg length(p=.012) in the S curve group. 3. It appeared that in the normal group without spinal scoliosis, the results of comparing the differences in apparent true leg length and spinal length according to the characteristics of the subjects showed a statistical significance in spinal length and gender(p=.000), age (p=.008), height(p=.000), and whether or not there was a regular exercise over once per week(p=.001). 4. On the correlations between C curve, reverse C curve, and S curve and differences in apparent true leg length and spinal length, it appeared that: (a) As the difference in apparent leg length gets bigger the difference in true leg length gets big in C curve(r=.551, p=.000). (b) As the difference in apparent leg length gets bigger the difference in true leg length gets big in reverse C curve(r=.511, p=.006). (c) There is no correlation in S curve.

• Journal of the Korean Society of Costume
• /
• v.53 no.4
• /
• pp.87-99
• /
• 2003

The measurement in ruling period of King Sejong in Chosun Dynasty remained unchanged compared with that of Goyeo Dynasty. But Hwangjongchuck, the basis of measurement was amended in the 7th year in ruling period of King Sejong, Juchuck, Youngchochuck, Cholegichuck in the 12th, and Pobeckchuck in the 13th. The record of Pobeckchuck first appeared in the true record of Chosun Dynasty in the 4th year in ruling period of Sejong, and first record on the amendment of the Pobeckchuck was found in the 13th year in his ruling period. The presentation of the comparison of Pobeckchuck with Cholegichuck in volume 128 of true record of Sejong makes help the estimation of the length of Pobeckchuck. To calculate one Chuck of Pobeckchuck with this measurement comes to 44.75cm in present measurement, and the length at this time had remained unchanged to Yeonsangun period. Important fact which was newly found in the true record of Chosun Dynasty was that Pobeckchuck had been used for diverse purposes. Pobeckchuck was used to measure width, length and thickness in manufacturing wardrobe. and also to measure cloth decorating wardrobe. This is the first record(4th year of reign of Sejong) showing that Pobeckchuck was first used to measure cloth in Chosun Dynasty The record shows that Pobeckchuck was also used to measure the length of circumference of castle for its construction. to measure distances between people, the length of hook of wooden handle, and the height of man.

• Nuclear Engineering and Technology
• /
• v.53 no.7
• /
• pp.2323-2333
• /
• 2021

The paper proposes a technique for reconstructing the true hardening curve of isotropic materials from ring tensile tests. Neutron irradiated 42XNM alloy tensile properties were investigated. The calculation of the true hardening curve for tensile and compression tests of standard cylindrical samples was performed at the first step. After that, the FEM-model was developed and validated using the ring tension and compression tests (with the hardening curve defined in step 1). Finally, the true hardening curve was calculated by selecting the FEM-model parameters and its validation by ring sample tests in different states using an iterative method. For these samples, experimental and calculated gauge length values were obtained, and the corresponding material's constants were estimated.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.3
• /
• pp.39-47
• /
• 2000

In this paper, we propose a new method of finding the true length of the line and long axis of the ellipse at the $\theta$=$\theta$o＋ 90$^{\circ}$ and short axis of the ellipse at the $\theta$ = $\theta$o from the Hough transform (HT) results. Through the simulations, we showed that the true length of the line and ellipse could be obtained with 98 % accuracy by using the distance from the maximum envelope to the minimum envelope. To compare the simulation results with the experimental results, we performed optical experiments by using a HT CGH filter. Through the experiments, we showed that our results were very similar to those of the simulation.

• Journal of Life Science
• /
• v.11 no.2
• /
• pp.166-172
• /
• 2001

Various types of the seeding of bottle gourd widely used as a rootstock of watermelon has been required to satisfy the farmers need. The study was done to determine the effect of light quality of blue, red and far-red lights treated with light emitting diodes on growth and morphology of bottle goured seeding and chlorophyll content of its cotyledons. The lights were treated in the growth chamber for 7 days to the seeding elapsed 8 days after sowing under natural condition, and 64 hole trays with commercial bedsoil. Plant height, length and diameter of hypocotyl, leaf area of cotyledon and first true leaf, its leaf length, number of true leaves, fraction and total dry weight were measured. Red light shortened and slenderized the hypocotyl, which lengthened by far-red light and thickened by blue light. Plant height was declined in order of far-red light treatment, blue and red lights mainly due to difference of hypocotyl length, Area and length of the first true leaf became smaller and shorter under far-red light than under the other lights. However, blue light increased leaf area of cotyledons. Two cultivars cv. Yongjadaemok and cv. Kunghap had different response to the light treatments in total seedling dry weight(dw); far-red and red light treatments showed the greatest and the least dw of hypocotyl, respectively, while blue and red lights did the greatest dw of the other organs. Among the ratio of each organ dw to total dw, those of hypocotyl and true leaves were different between the light treatments; the highest ratio of hypocotyl dw to total dw was observed in far-red light treatment but the lowest was in red light treatment. Those of the true leaves were the lowest in far-red light and similar response in blue or red light treatment. Chlorophyll content of cotyledons was decreased in order of red light treatment, blue and far-red lights, meaning that short period light treatment may influence photosynthesis of seeding and afterward its growth.

• Journal of Korean Society of Forest Science
• /
• v.83 no.3
• /
• pp.357-364
• /
• 1994

In this paper, the characteristics of cable logging systems, of which skyline length is adjustable during operation are discussed from a standpoint of system geometry. Among the cable logging systems, the live skyline is the typical one, of which operation is easy to understand. To analyze the cable logging mechanics of the live skyline, computer models were developed. In developing the computer models, the concept of the live skyline operation was classified into 'true live skyline' and 'live skyline with lift'. The former assumes to adjust skyline length continuously to maintain the skyline clearance over ground constant during inhaul ; the latter assumes to shorten the skyline length only to keep the minimum skyline clearance during inhaul. The computer model was used in investigating the mechanical efficiency and the operational characteristics of the live skyline system. First, the payload capability of live skyline was compared with that of standing skyline. Second, the effect of the change in the log-drag geometry on the payload capability of live skyline was investigated. Finally, the payload capability of live skyline with lift was compared with that of true live skyline as an effort to explain the concepts of true live skyline and live skyline with lift.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1211-1215
• /
• 2005

In the GPS attitude determination system, the baseline length constraints can be used efficiently to reduce the search space. It is possible by adopting the assumptions that the baseline length doesn't change and the true baseline length is precisely known. But in real situation, the baseline length might be changed by many reasons and it is impossible to measure the true baseline length because there exists measurement error and antenna phase centre movement. In order to analyze the effect of the baseline length accuracy, one needs to know the relation between the accuracy of the baseline length and success rates of the integer ambiguity resolution. In this paper, the effect of the baseline length accuracy to the integer ambiguity resolution in the attitude determination system is analyzed by empirical method. The results show that the margins in the baseline length accuracy is less than a few cm which implies that one should take great cares when applying the attitude determination system to the flexible structures.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.594-601
• /
• 2019

A true MSEW abutment is an abutment type that directly supports the load of a superstructure. Metal strips, which are in-extensile reinforcements, should be used to minimize abutment deformation. A study to derive the application conditions of a True MSEW abutment was carried out by Zevogolis(2007). As a result, the pullout factor of safety of the uppermost reinforcement was estimated to be the smallest. Therefore, the pullout factor of safety of the uppermost reinforcement is the most important design factor. Parameter analysis was conducted with the abutment length, abutment heel, and abutment height as variables. The pullout factor of safety increased with increasing abutment length and abutment heel length. This is because the contact area increases and the superstructure is dispersed as the abutment length and abutment heel length increase. The pullout factor of safety converges at an abutment length of 1.2m and an abutment heel length of 0.9m. This is because the effective length of the reinforcement is reduced due to the increase in contact area. On the other hand, the extension of the superstructure will increase if the abutment length and abutment heel length are increased excessively. In addition, earth-volume is increased if the abutment height increases excessively. This acts as an upper load on the MSE wall. Therefore, it needs to be examined carefully.

• Journal of the Optical Society of Korea
• /
• v.19 no.2
• /
• pp.165-168
• /
• 2015

A simple method to determine the focal length of a lens using the Talbot image is presented. This method uses only one grating, requiring neither Moir$\acute{e}$ fringe analysis nor the angle between the gratings. The original Fourier transform was used to access the spectrum beyond the limitation set of the usual fast Fourier transform to determine the (de)magnification accurately enough to be used for the focal length. A set of Talbot images simulated numerically with the Fresnel diffraction integral was used to demonstrate the method. For focal lengths between 5550 mm and 5650 mm, the mean difference between the focal lengths determined from the Talbot images and the true values was 3.3 mm with the standard deviation of the difference being 3.8 mm. The true focal lengths can be recovered with an accuracy of 0.06%.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.27 no.5
• /
• pp.114-119
• /
• 2000

This study was carried out to obtain fundamental information of growth response of ground cover plants under artificial light quality at indoor. Aglaonema 'Silver Queen', Hedera helix L., Hoya carnosa 'Tricolor' and Saintpaulia ionantha 'Frances' were examined under a 400lux light intensity consisted of Mercury lamp, True-lite lamp, incandescent lamp, dark-room and sunlight indoor condition. A data analysis were performed by GLM, Duncan's multiple range test and mean score with SAS program. Results of experiments are as follows; 1. A plant growth status was better showed under the True-lite lamp than sunlight. 2. A Saintpaulia ionantha flower color was responded in the first place, the deep pinkish red color of Saintpaulia ionantha flower was obtained under Mercury lamp and "True-lite lamp", "sunlight", and incandescent lamp were follow. Flower numbers of Saintpaulia ionantha after 60 days tended to decrease under every artificial light quality. 3. Leaf length and leaf width were increased under True-lite lamp, but most of plants was not significantly affected by artificial light quality. 4. A stem length of Hedera helix was increased the highest rank under sunlight also, one of artificial light, the highest increase rank was showed under incandescent lamp. 5. Chlorophyll content was highly increased under Mercury lamp, but was responded poor under incandescent lamp.