• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.900-907
• /
• 2008

All electric trains in the city should be run without any troubles of the equipments in order to offer good services to the passengers. But some breakdowns occur when they are operated due to the long time uses. There are mechanical troubles and electrical troubles included reactors. Most of them, the reason of the troubles can be found out easily after breakdown. But it is difficult to find out the reasons of the reactor troubles which disappear after operation. The reactors of the train filter the current which supplied from electrical lines and supply the current to the inverter and block the ripple of the current. Partial discharge occur from the reactor by the heat. accordingly, If the signals of discharge were perceived, it could be anticipate the deterioration degree of insulation. In this paper, on-monitoring system for reactor's troubles in trains is established and the output results of monitoring system are investigated.

• 수산해양기술연구
• /
• 제23권1호
• /
• pp.25-29
• /
• 1987

1980년부터 1985년까지 6년 간의 우리나라 해난사고 중 기관손상사고를 발췌하여 주성분분석법에 의하여 분석한 결과는 다음과 같다. 1. 여러 가지의 기관손상사고 중 축계, 실린더 계통 및 추진기의 손상사고율이 매우 높은 비중을 차지하고 있다. 2. 치차, 실린더 계통의 손상은 재질불량, 노후마모 등의 기계적 원인에 의한 사고율이 높으며 추진기, 각종 관계통의 사고는 취급 부주의, 불완전 수리 등 soft적인 원인에 의한 경우가 많다. 3. 치차, 축계 등의 사고는 매우 중손이며 관계통이나 추진기 사고는 비교적 경손이다. 4. 대부분의 사고는 인간의 실수, 부주의 등 soft적인 원인에 의하여 발생한다.

• 산업공학
• /
• 제21권3호
• /
• pp.247-253
• /
• 2008

There are various types of unexpected troubles in service of a thermal power plant, which consists of many complicated high-tech mass equipments. The troubles are mostly caused by the manufacturing defects, the material deteriorations, the human errors, and others. Failures of its system due to the troubles, can bring on the extravagant economic loss and the qualitative degradation of electricity. Especially, it is most important to find a way to decrease human errors because it can result in not only the economic loss, but also morale declination of employees or the department related to the trouble. Therefore, we categorize previous troubles related to the human errors, and try to show the causations and the counter-measures based on the various categories such as maintenance, an operation, and system of the thermal power plants.

• 가정∙방문간호학회지
• /
• 제25권2호
• /
• pp.197-208
• /
• 2018

Purpose: This study investigated the smartphone using time, troubles with smartphone usage, and related factors in Korean adolescent smartphone users. Methods: Data were obtained from 54,603 subjects aged 13 to 18 years in the 2017 13th Korea Youth Risk Behavior Web-based Survey Results: The study analyzed the school type, academic achievement, residence type, weekly average allowance, and usual counselor, perceived stress, happiness, and depression of the subjects showed a significant difference in the variable of troubles experienced by the smartphone user. Multiple sample logistic regression analysis showed that adolescents with low academic achievement (weekday, weekend OR = 1.78, 1.65), low economic status (weekday, weekend OR = 1.17, 1.37), friends with distress counselors (weekday, weekend OR = 1.29, 1.24), weekly average allowance (weekday, weekend OR = 1.85, 1.50), stressed (weekend OR = 1.25), depressed (weekday, weekend OR = 1.26, 1.14), family troubles (weekday, weekend OR = 1.14, 1.15), friendship troubles (weekday, weekend OR = 1.70, 1.38), and academic performance troubles (weekday, weekend OR = 1.28, 1.38) spent more than the average using time on their smartphones. Conclusion: To prevent overdependence on smartphone use among adolescents, a nursing intervention program that relieves stress and lowers depression should be developed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 전기설비
• /
• pp.88-90
• /
• 2005

There are a lot of troubles during the transfer of the source of electric power in UPS (uninterruptible power supply system) which is indispensable to the industrial equipments. They cause blackout accidents, resulting in a great economic loss. After measuring and analyzing the transient phenomena happening during the transfer, this paper presents the solution of the troubles. The solution can be used as a basic material for maintenance and it can minimize the troubles occurring in UPS and enhance the reliability of it.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제33회 KOSCO SYMPOSIUM 논문집
• /
• pp.282-292
• /
• 2006

Various kinds of coals are supplied for coal fired power plants as the coal market situations are fluctuated with the high prices of oil and coals over the world. The quality of coal is decreasing as coal consumption increased and some specifications of coals are out of boiler design criteria. It could make combustion troubles such as coal clogging, spontaneous combustion, coal firing in the coal handling equipments, ash slag and clinker issues, etc. This paper covers combustion troubles, issues and countermeasures in the biggest coal fired power plant in Korea.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2003년도 학술대회지
• /
• pp.1-11
• /
• 2003

The service reliability of power plants strongly depends on the excellent performance and integrity of hydrodynamic bearings. Consequently, the bearings must be properly designed so as to control vibration amplitudes of rotor due to mass unbalance in passing critical speeds and also suppress self-excited vibrations of rotor even over maximum rated speeds. Furthermore, the bearings must be designed so as to maintain required tribological performance even under severe operating conditions. However, various tribological troubles have been experienced in power plants in Japan. The actual troubles are analysed, focusing on not only direct mechanical causes but also specific bearing designs that surfaced the troubles. Furthermore human factors that decided such designs are also studied. The powerful database of troubles and analyses will contribute greatly to designing advanced power plants with enhanced service reliability in the future. To this end, trouble information should be disclosed, shared and transferred limitlessly. Cooperation of users of power plants is essential to making more advanced design specifications, because no one has easier access to operating and trouble information of power plants than users.

• 한국산학기술학회논문지
• /
• 제7권6호
• /
• pp.1004-1011
• /
• 2006

본 논문은 OBD(On-Board Diagnostics)를 통해 얻은 데이터(직접 취득 128대, 관련 사이트 획득 데이터 1,114대)를 토대로 승용차 엔진의 고장 유형별 분포를 분석하고, 이를 다시 승용차 엔진의 계통별 및 복잡한 경우의 고장 현상으로 구분하여 그에 따른 대표적인 진단 사례 방안을 제시하고 있다. 그 결과, 고장 유형별 분포는 공회전시 부조가 32%(394대), 가속 불량이 21% (261대), 주행중 시동 꺼짐이 19%(234대), 시동 불량이 11%(133대), 연비 불량이 9%(116대), 출력 부족이 8%(104대)의 순으로 나타났다. 또한 고장 현상을 입력, 제어, 출력, 기계적인 계통으로 나누어 분석하여본 결과, 계통별 고장현상 및 진단에서는 단순 부품에 의한 고장은 진단하는데 크게 어렵지 않으나 제어 계통에서는 복합적인 문제가 발생되면 OBD와 연계된 전용장비로 해당구간을 취하여 데이터를 얻어 파형을 겹쳐보는 등의 방법을 이용하여 분석함으로써 대표적인 진단사례 방안을 제시할 수 있었다.

• 한방비만학회지
• /
• 제3권1호
• /
• pp.85-93
• /
• 2003

Objective : The purpose of this study is to investigate the emotional roubles of the obese and their's relationship with obesity so as to be useful for treating the obesity and estimating it's prognosis. Method : This study investigates the fifteen statistical treatises for the emotional troubles of the obese, and distributes their's results into depression, perception of obesity, satisfaction of body shape, eating behavior, and other emotional troubles. Conclusions: 1. In the obese dissatisfaction and inferiority complex for body shape are one of the causes bring about depression. 2. Masked depression is often, so exact examination is needed and the treatment of depression is useful for treating the obesity and estimating it's prognosis. 3. In the obese correcting wrong body shape image and making them gain confidence in treatment of obesity is needed because they have low self-efficacy in overeating, high perception of obesity, and dissatisfaction of body shape. 4. The obese has a abnormal eating behavior and it is related with the emotion troubles such as depression, low self-esteem, and so forth.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.131-137
• /
• 1994

Detection of grinding trouble occuring during the grinding process is classified into two types, i.e, based on the quantitative and qualitative knowledge. But, since the grinding operation is especially related with a large amount of functional parameters, it is actually defficult to cope with the grinding troubles occuring during process. Therefore, grinding trouble-shooting has difficulty in satisfying the requirement from the user. To cope with the grinding troubles occuring during the process, the application of neural network is on effective way. In this study, we identify the four parameters derived from the AE(Acoustic Emission) signals and present the grinding trouble-shooting system utilizing a back-propagation model of the neural network.