• Journal of Biosystems Engineering
• /
• 제41권1호
• /
• pp.12-20
• /
• 2016

Purpose: Pepper prices have risen continuously because of a decrease in cultivation area; therefore, mechanical harvesting systems for peppers should be developed to reduce cost, time, and labor during harvest. In this study, a screw type picking head for a self-propelled pepper harvester was developed, and the optimal working conditions were evaluated considering helix types, winding directions of helix, and rotational speeds of the helix. Methods: The screw type was selected for the picking head after analyzing previous studies, and the device consisted of helices and a feed chain mechanism for conveying pepper branches. A double helix and a triple helix were manufactured, and rotational speeds of 200, 300, and 400 rpm were tested. The device was controlled by a variable speed (VS) motor and an inverter. Both the forward and reverse directions were tested for the winding and rotating directions of the helix. An experiment crop (cultivar: Longgreenmat) was cultivated in a plastic greenhouse. The test results were analyzed using the SAS program with ANOVA to examine the relationship between each factor and the performance of the picking head. Results: The results of the double and triple helix tests in the reverse direction showed gross harvest efficiency levels of 60-95%, mechanical damage rates of 8-20%, and net marketable portion rates of 50-80%. The dividing ratio was highest at a rotational speed of 400 rpm. Gross harvest efficiency was influenced by the types of helix and rotational speed. Net marketable portion was influenced by rotational speed but not influenced by the type of helix. Mechanical damage was not influenced by the type of helix or rotational speed. Conclusions: Best gross harvest efficiency was obtained at a rotational speed of 400 rpm; however, operating the device at that speed resulted in vibration, which should be reduced.

• 한국정보과학회논문지:정보통신
• /
• 제36권4호
• /
• pp.360-368
• /
• 2009

세계적으로 가입자망의 고도화 및 광대역화가 경쟁적으로 추진되고, 이에 따른 신규 서비스도 활성화되고 있는 추세이다. 국내 광통신 산업의 저변 확대와 육성 발전, 차세대 장비 개발, 광가입자망 기반 고품질 서비스 및 플랫폼 개발의 일환으로, ETRI(Electronics and Telecommunications Research Institute)에서는 자체적으로 FTTH(Fiber-To-the-Home) 표준 BMT(Bench Mark Test) 테스트베드와 네트워크 운영센터 및 IPTV 서비스 장비로 FTTH 서비스센터를 구축하고, 통신망사업자를 통하여 규모 있는 상용 광가입자망을 구축하고 연동하였다. 본 논문에서는 ETRI의 FTTH 서비스센터와 통신사업자의 상용 광가입자망 구축에 사용되는 FTTH E-PON(Ethernet Passive Optical Network) 시스템에 대해 QoS(Qualiy of Service) 기반의 TPS(Triple Play Service)와 QoE(Quality of Experience) 측면에서 시험한 성능 평가 결과를 기술하였다.

• 한국산학기술학회논문지
• /
• 제22권6호
• /
• pp.314-320
• /
• 2021

최근 사회적으로 결혼연령이 높아짐에 따라 고령산모가 증가하면서 생화학적 표지물질을 이용한 다운증후군 선별검사는 산모들에게 필수적인 검사가 되었다. 다운증후군 임신을 진단하는 과정은 선별검사에서 고위험군으로 보고 되면 융모막 융모생검이나 양수검사 같은 침습적 검사를 통해 염색체 분석을 하는 단계로 진행이 되는데 이러한 확진검사는 비용이 많이 들고 태아손실의 위험도가 높다. 따라서 위험도는 낮고 다운증후군 발견율이 높은 선별검사를 선택하여 불필요한 침습적 검사를 줄여 산모와 태아의 위험도를 낮추는 것이 중요하다. 본 연구는 2018년 용인의 임상검사기관에 산전선별검사를 의뢰한 17세부터 46세까지 총 36,436명을 대상으로 triple test(185명), quad test(3,629명), integrated test(18,932명), sequential test(13,690명) 4가지 검사를 direct sandwich, indirect sandwich 기술을 이용한 Time-resolved fluoroimmunoassay 방법과 sandwich 방법을 이용한 면역측정 방법을 사용하여 35세 미만과 35세 이상 산모의 다운증후군 위험도를 분석하여 산모 연령이 증가함에 따른 양성률의 차이를 확인하였다. 검사결과 전체 산모의 다운증후군 고위험군은 triple test 36명, quad test 408명, integrated tset 1,441명, sequential test 924명 이었다. 이중 35세미만 산모의 고위험군은 triple test 7명(3.8%), quad test 141명(3.9%), integrated tset 644명(3.4%), sequential test 430명(3.4%)이었고, 35세이상 산모의 고위험군은 29명(15.7%), 267명(7.4%), 797명(4.2%), 494명(3.6%)으로 나타나 35세이상 산모가 훨씬 높은 고위험군을 나타내었다. 임상에 있어서 35세 미만과 35세 이상 산모의 위험도 분석을 한 연구는 국내외에 거의 희박하므로 본 연구는 향후 국내외의 많은 검사기관들과 예비 산모들에게 다운증후군 위험의 예방과 치료를 위한 매우 유용한 기초 자료가 될 것으로 생각된다.

• 대한치과보철학회지
• /
• 제57권4호
• /
• pp.321-327
• /
• 2019

목적: 본 연구는 단일구조 지르코니아 크라운의 소결 후 소성 과정이 변연 및 내면 적합도에 미치는 영향에 대하여 3차원으로 평가해 보고자 하였다. 재료 및 방법: 타이타늄 지대치 모형을 제작하여 10개의 단일구조 지르코니아 크라운을 제작하였다. 제작된 단일구조 지르코니아 크라운을 소결 한 상태를 대조군으로, 소결 후 광택을 위해 추가적인 소성단계를 거친 후를 실험군으로 설정하였다. 각 군에서 triple-scan protocol을 이용하여 협설과 근원심으로 단면을 형성하고 변연 및 내면 적합도를 계측하여 통계 분석하였으며, 삼차원 표면 비교를 시행하였다 (${\alpha}=.05$). 결과: 변연과 내면 적합도를 분석한 결과 근심 축벽에서 대조군($32.0{\pm}24.3{\mu}m$)과 실험군 간($17.0{\pm}10.8{\mu}m$)의 통계적 유의한 차이가 있었고 (P < .020), 원심 축벽에서 대조군($60.2{\pm}24.3{\mu}m$)과 실험군($71.8{\pm}21.5{\mu}m$)간의 통계적으로 유의한 차이가 있었다 (P < .01). 나머지 측점지점에서는 통계적으로 유의한 차이가 없었다. 결론: 단일구조 지르코니아 크라운에서의 소결 후 추가적인 소성은 내면의 변형에 큰 영향을 미치지 않았고 임상적으로 허용 가능한 범위에 있었다.

• Journal of Welding and Joining
• /
• 제31권1호
• /
• pp.58-64
• /
• 2013

The following results were obtained, microstructures and tensile properties in arc brazed joints of DP(dual phase) steel using Cu-5.3wt%Sn insert metal was investigated as function of brazing current. 1) The Fusion Zone was composed of ${\alpha}Fe+{\gamma}Cu$ and Cu23Sn2. The reason for the formation of these solid solutions. Despite, Fe & Cu were impossible to solid solution at room temperature. It's melting & reaction to something of insert metal & Base Metal (DP Steel) by Arc. Brazing Process has faster cooling rate then Cast Process, Supersaturated solid solution at room temperature. 2) The increase Hardness of Fusion Zone was directly proportional to the rise of welding current. Because, ${\alpha}Fe+{\gamma}Cu$ phase (higher hardness than the Cu23Sn2.(104.1Hv < 271.9Hv)) Volume fraction was Growth, due to increasing the amount of base metal melting by High current. 3) The results of tensile shear test by Brazing, All specimens happen to fracture in Fusion Zone. On the other hand, when Brazing Current increasing tend to rise tensile load. but it was very small, about 26-30% of the base metal. 4) The result of fracture analysis, The crack initiate at Triple Point for meet to Upper B.M/Under B.M/Fusion Zone. This Crack propagated to Fusion zone. So ruptured by tensile strength. The Reason to in the fusion zone fracture, Fusion zone by Brazing of hardness (strength) was very lower then the base metal (DP steel). In addition the Fusion Zone's thickness in triple point was thin than the base metal's thickness in triple point.

• Korean Journal of Acupuncture
• /
• 제22권4호
• /
• pp.29-41
• /
• 2005

Objectives : Although previous anatomic, physiological and biophysics studies have examined the acupuncture meridian system, much remains unclear and controversial. This study was undertaken to examine electrical potential aspects of the meridian system. Electric potential was measured at the well and sea acupoints on the twelve acupuncture meridians (AM), on forty patients half with loin lesions, and pain of loin and lower extremities(LL) and half with shoulder lesions, and aching of shoulder and arm(SA). The object was to determine to what extent electric potential is an important risk factor between LL and SA. Methods : At the left and the right side with each of twenty LL and twenty SA patients, physiograph was used to measure electric potentials of AM ten sessions. T-test was used to compare the mean of electric potential between the two different pain groups and multiple logistic regression was used to analyze the risk of the 24 electric potentials measured. Results and Conclusions : In the LL, the only electric potential that was statistically significantly greater than SA was the bladder meridian on the left side. On the contrary, electric potentials in SA, which includes the large intestine, pericardium, triple burner, spleen, stomach, kidney and gallbladder meridians, were statistically larger than those of LL at the same side. On the right side, the five kinds of electric potentials(lung, large intestine, small intestine, pericardium and gallbladder meridian) of LL were statistically larger than those of SA. On the triple burner, stomach and kidney meridians electric potentials of SA were larger than those in LL. After adjusting for 24 electric potentials, pain risk factors, and different illness categories, multiple stepwise selection logistic regression modeling, resulted in the final selection of a total of 13 statistically significant electric potentials. These were 7 electric potentials at left side - small intestine, triple burner, spleen, stomach, bladder, liver and gallbladder meridian, and 6 at rght side - lung, large intestine, heart, pericardium, kidney and bladder meridian.

• 대한전자공학회논문지SD
• /
• 제48권2호
• /
• pp.67-72
• /
• 2011

삼중대역(2.3/2.5/3.5GHz) m-WiMAX 시스템의 제작을 위한 8층의 인쇄회로기판을 제작하였다. 고주파 동작시에도 우수한 성능을 확보하기 위하여 저유전율을 사용한 인쇄회로기판을 제작하였다. 또한 시스템 전체의 크기를 축소하기 위하여 수동소자를 삽입시킨 임베디드 인쇄회로기판을 제작하였다. 그 결과 시스템 면적의 9%를 줄일 수 있었다. 제작된 인쇄회로기판을 사용하여 삼중대역 m-WiMAX 시스템이 제작되었으며, 인터넷 연결 테스트를 성공적으로 수행하였다. 개발된 임베디드 인쇄회로기판은 시스템의 면적 축소와 저신호 손실 RF 통신 시스템에 효과적인 대응을 가능하게 할 것이다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1995년도 춘계학술대회논문집
• /
• pp.238-251
• /
• 1995

Creep of metals has been explained conventionally by dislocation climb and grain boundary sliding indiffusion controlled process. The reorienations of the atoms in the grain by three dimensional crystallizing $\pi$-bondings are visualized as grain rotatins during slow deformation, fold formatin at triple point, increased crevice dspace between grains. grain boundary sliding, grain boundary micration and formation of cracks at the grain boundaries . And also the rupture time and average creep strain rate are explained by the three-dimensional crystallizing $\pi$- bondings and they can be determined by uniaxial tensile test.

• 대한수학회논문집
• /
• 제14권2호
• /
• pp.329-336
• /
• 1999

We construct the Gelfand triple based on the space \ulcorner, introduced by Sato and di Silva, of analytic and exponentially decreasing function. This space denoted by(\ulcorner) of white noise test functionals are defined by the operator cosh \ulcorner, A=-(\ulcorner)\ulcorner+x\ulcorner+1. We also note that many properties like generalizations of the Paley-Wiener theorem and the Bochner-Schwartz theorem hold in this space as in the space of Hida distributions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 C
• /
• pp.616-618
• /
• 2000

This paper describes the recent research and technical trend of power cable system. Compact sizing with long length and large capacity is the main trend of the power cable. From the manufacturing process to the monitoring of the underground power line, various new techniques are being developed for reliability and high quality such as in-line monitoring system, triple common extrusion, PD measurement system, new type completion test, etc.