• 제목/요약/키워드: triggering device

검색결과 43건 처리시간 0.022초

해양레저 안전장비 개발 (Development of Safety Devices for Marine Leisure)

  • 구자영;임정빈;이재응;남택근;정중식;박성현;양원재;안영섭
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2006년도 춘계학술대회 및 창립 30주년 심포지엄(논문집)
    • /
    • pp.241-246
    • /
    • 2006
  • 이 논문에서는 안전한 해양레저 행위를 지원하기 위한 두 가지 개인 휴대용 전자장치 개발 내용을 기술한다. 하나는 조난자를 신속히 민-관-군 동시 다발적으로 수색하기 위한 선박용 9GHz 대역의 일반 레이더 전파에 응답하는 레이더 응답장치이다. 다른 하나는 조난자의 위치를 추적하고 식별할 수 있는 900MHz 스펙트럼 확산 주파수 홉핑 방식의 송수신기와 GPS를 이용한 해상 무선식별장치 개념의 전자장치이다. 해양경찰 함정을 이용한 해상에서의 다양한 현장실험을 통하여 두 가지 장비의 성능을 확인하였다. 그리고 향후 상용화 방안에 대해서 검토하였다.

  • PDF

한국의 방송서비스 공익성심사에 관한 고찰 : 미국 및 영국의 사례를 중심으로 (Public Interest Test of Broadcasting Services in Korea : Focused on US and UK)

  • 이한영
    • 통상정보연구
    • /
    • 제12권1호
    • /
    • pp.179-202
    • /
    • 2010
  • Broadcasting services sector has been facing strong public pressure to shift gears from regulation to deregulation since mid-1990s, where a triggering role was played particularly by rapid development of IT technology and content digitization. Major agenda was how to reduce regulatory divides between more liberal telecommunication sector and less liberal broadcasting. After all, common solution package worldwide was for the latter to switch over from network-dependent(vertical) to network-independent(horizontal) regulation, and to facilitate more open and competitive transmission with content market kept protected. This is no other than decoupling content provision from broadcasting and promoting market access towards the latter. Policy experiences of US and UK show that there exists a complementary relationship between quantitative and qualitative restrictions in implementing such deregulation. While mitigating quantitative ownership regulations in broadcasting, they also sought to systematize, so-called, PIT(public interest test) as a qualitative safety device to cope with the risk of losing fundamental public values accordingly in broadcasting. Recent domestic progress in broadcasting legislation in 2009, however, seems to overlook the growing importance of PIT in the process of deregulation. Bearing this motivation in mind and taking account of the relevant WTO disciplines, this paper is to address policy issues and suggestions for PIT in Korea's broadcasting services sector.

  • PDF

좌굴방지장치 영향을 고려한 복합재 적층판의 압축강도에 대한 이차원 크기 효과 (Two Dimensional Size Effect on the Compressive Strength of Composite Plates Considering Influence of an Anti-buckling Device)

  • 공창덕;이정환
    • Composites Research
    • /
    • 제15권4호
    • /
    • pp.23-31
    • /
    • 2002
  • 시편 게이지 면적($길이{\;}{\times}{\;}폭$)의 이차원 크기효과가 T300/924 $[45/-45/0/90]_3s$ 탄소섬유/에폭시 적층판의 압축거동에 대해 조사하였다. 개조된 압축시험치구(ICSTM)와 좌굴방지장치가 $30mm{\;}{\times}{\;}30mm,{\;}50mm{\;}{\times}{\;}50mm,{\;}70mm{\;}{\times}{\;}70mm,{\;}90mm{\;}{\times}{\;}90mm$의 게이지 길이와 폭을 가진 시편들의 압축시험에 사용하였다. 모든 경우의 파괴들은 시편 게이지 길이 내에서 주로 갑자기 발생하였다. 파괴 후 분석결과는 $0^{\circ}$층의 섬유의 미소좌굴에 의해 파괴를 시작하여 최종파괴를 일으키는 임계파괴기구일 것으로 생각되었다. 이것은 매트릭스 지배적인 파괴를 의미하며, 초기섬유굴곡에 따라 파괴가 지배적으로 시작된다는 것을 말한다 이것은 또한 제작공정과 품질이 압축강도를 결정하는 중요한 역할을 한다고 볼 수 있다. 좌굴방지장치를 장착하고 시험할 때 장치의 볼트 조임 토크에 따라 시편과의 접촉마찰 등에 의해 실제 압축강도 보다 크게 나타나는 결과를 보였다. 좌굴방지장치의 영향을 유한요소법을 이용하여 해석한 결과 실제 압축강도 보다 7% 정도 크게 나타남을 확인하였다. 부가적으로 홀을 갖는 시편들의 압축시험도 수행되었다. 홀에 의한 국부응력집중이 적층판 강도에 지배적 요인이었다. 파괴강도는 홀 크기와 시편 폭이 증가할수록 감소하였으나 탄성응력집중계수로 예측된 값보다는 일반적으로 크게 나타났다. 이것은 사용된 복합재가 이상적인 취성재질이 아니라는 것을 의미하며 홀 주위에서 다소간의 응력이완이 발생한다고 볼 수 있다. X선 검사 사진분석에서 섬유좌굴과 층간분리형태의 손상이 파괴하중의 약 80%에서 홀 가장자리로부터 시작되었고 임계파괴크랙길이인 2-3mm의 불안정한 상태에 도달하기 전까지는 하중 증가와 더불어 안정되게 파괴가 진전되었다(시편의 기하학적 크기에 의존함). 이 손상과 파괴는 선형 cohesive zone 모델로 해석되었다. 노치없는 시편의 압축강도와 평면 파괴인성의 측정된 적층판 변수들을 사용하여 홀의 크기와 시편 폭의 함수로서 홀을 갖는 적층판의 압축강도를 성공적으로 예측하였다.

Boron 확산공정을 이용한 5,000V, 4인치 광 사이리스터의 제작 및 특성 평가 (Fabrication of 5,000V, 4-Inch Light Triggered Thyristor using Boron Diffusion Process and its Characterization)

  • 박건식;조두형;원종일;이병하;배영석;구인수
    • 전력전자학회논문지
    • /
    • 제24권6호
    • /
    • pp.411-418
    • /
    • 2019
  • Light-triggered thyristors (LTTs) are essential components in high-power applications, such as HVDC transmission and several pulsed-power applications. Generally, LTT fabrication includes a deep diffusion of aluminum as a p-type dopant to form a uniform p-base region, which needs careful concern for contamination and additional facilities in silicon semiconductor manufacturing factories. We fabricated 4-inch 5,000 V LTTs with boron implantation and diffusion process as a p-type dopant. The LTT contains a main cathode region, edge termination designed with a variation of lateral doping, breakover diode, integrated resistor, photosensitive area, and dV/dt protection region. The doping concentration of each region was adjusted with different doses of boron ion implantation. The fabricated LTTs showed good light triggering characteristics for a light pulse of 905 nm and a blocking voltage (VDRM) of 6,500 V. They drove an average on-state current (ITAVM) of 2,270 A, peak nonrepetitive surge current (ITSM) of 61 kA, critical rate of rise of on-state current (di/dt) of 1,010 A/㎲, and limiting load integral (I2T) of 17 MA2s without damage to the device.

Irradiation of Intense Characteristic X-rays from Weakly Ionized Linear Plasma

  • Sato, Eiichi;Hayasi, Yasuomi;Tanaka, Etsuro;Mori, Hidezo;Kawai, Toshiaki;Takayama, Kazuyoshi;Ido, Hideaki
    • 한국의학물리학회:학술대회논문집
    • /
    • 한국의학물리학회 2002년도 Proceedings
    • /
    • pp.396-399
    • /
    • 2002
  • Intense quasi-monochromatic x-ray irradiation from the linear plasma target is described. The plasma x-ray generator employs a high-voltage power supply, a low-impedance coaxial transmission line, a high-voltage condenser with a capacity of about 200 nF, a turbo-molecular pump, a thyristor pulse generator as a trigger device, and a flash x-ray tube. The high-voltage main condenser is charged up to 55 kV by the power supply, and the electric charges in the condenser are discharged to the tube after triggering the cathode electrode. The x-ray tube is of a demountable triode that is connected to the turbo molecular pump with a pressure of approximately 1 mPa. As electron flows from the cathode electrode are roughly converged to the molybdenum target by the electric field in the tube, the weakly ionized plasma, which consists of metal ions and electrons, forms by the target evaporating. In the present work, the peak tube voltage was almost equal to the initial charging voltage of the main condenser, and the peak current was about 20 kA with a charging voltage of 55 kV. When the charging voltage was increased, the linear plasma x-ray source grew, and the characteristic x-ray intensities of K-series lines increased. The quite sharp lines such as hard x-ray lasers were clearly observed. The quasi-monochromatic radiography was performed by a new film-less computed radiography system.

  • PDF

위치기반서비스를 위한 멀티레벨 위치 트리거 기법 (Techniques of Multilevel Location Trigger for Location-based Services)

  • 민경욱;김도현;남광우;김주완
    • 정보처리학회논문지A
    • /
    • 제13A권5호
    • /
    • pp.435-444
    • /
    • 2006
  • 위치기반서비스(LBS: Location-Based Services)의 이용자가 급증함으로써 최근 위치 트리거(Location Trigger) 서비스에 대한 다양한 응용분야가 등장하고 있다. 위치 트리거는 사용자의 이동 위치를 감지하여 특정한 지역에 진입, 존재, 이탈할 경우 사용자에게 단문문자서비스(SMS), 전자메일 등을 통하여 알리거나 또는 사용자에 의해 미리 정의된 특정한 서비스를 제공하는 기술이다 기존에 이러한 위치 트리거 기술은 위치 제공 서버에 주기적으로 위치정보를 요청하여 처리해 왔으나 LBS 서비스 가입자가 증가할수록 서버 및 통신 부하로 인하여 시스템의 성능 저하를 초래하게 된다. 이에 본 논문에서는 위치 트리거를 처리함에 있어서 이동통신망의 위치서버의 부하를 줄이고 모바일 단말기에 임베디드 된 GPS 디바이스의 전력 소모량을 최소화하는 멀티레벨 위치 트리거 방법에 대하여 연구하였다. 실제 본 논문에서 제시하는 방법을 설계하고 테스트베드를 구축하여 성능을 평가함으로써 위치 트리거 기술의 성능 향상에 기여하였다.

위치기반 푸쉬서비스 플랫폼 설계 및 구현 (Design and Implementation of a Location-Based Push-Service Platform)

  • 심재민;이응재;주용완;남광우;류근호
    • 한국공간정보시스템학회 논문지
    • /
    • 제11권4호
    • /
    • pp.47-55
    • /
    • 2009
  • 최근 이동전화, 와이브로, HSDPA 등 무선인터넷 기술이 발전하면서 이용자의 위치, 상황을 고려한 교통, 관광, 쇼핑 및 긴급구조 등의 맞춤형서비스들이 주목받고 있다. 이용자의 상황에 맞는 맞춤형서비스 제공을 위해서는 무선 단말기를 장착하고 이동하는 이동객체의 연속적으로 변화하는 위치 정보, 시간 정보, 그리고 속도 변화와 같은 동적인 특성 등을 종합적으로 고려해야 한다. 이 논문은 이동객체가 발생시키는 컨텍스트 처리를 위한 트리거의 유형을 정의하고 이러한 트리거를 처리하기 위한 방법들을 설계하고 이용자의 위치에 따라 정보를 제공하기 위한 이동객체의 컨텍스트 트리거를 포함하는 위치기반 푸쉬서비스 플랫폼을 제안한다. 제안된 시스템은 휴대폰 및 텔레매틱스 단말 내장형 GPS의 Ms-assisted 측위 모드 또는 Stand-alone 측위 모드를 기반으로 단말에서 이동객체 스트립 정보를 수집하고, 이용자 단말 에이전트를 통해 이용자의 컨텍스트를 추출하여 이를 서버에 전송하도록 분산 처리 기능을 갖는다.

  • PDF

3GPP GERAN CIoT 환경에서 디바이스 Triggering 기반 Reporting 절차 간소화 방안 (Simplification of Device-Triggered Reporting Procedure on 3GPP GERAN Cellular IoT Communications)

  • 김준석;신정완;정민영
    • 한국전자파학회논문지
    • /
    • 제27권1호
    • /
    • pp.80-83
    • /
    • 2016
  • 본 논문에서는 네트워크로 데이터를 주기적으로 전송하는 CIoT(Cellular IoT) 디바이스의 에너지 소모를 줄이고, 디바이스의 수명을 증대하기 위한 간소화된 상향링크 전송절차를 제안한다. 제안 방법에서 CIoT 디바이스는 네트워크에 자신의 서비스 및 트래픽 특성을 등록하고, 네트워크는 디바이스가 데이터 전송을 시도할 때마다 고정적으로 무선자원을 할당한다. 본 논문에서는 GSM(Global System for Mobile Communications) 표준의 상향링크 전송절차를 기반으로 한 구체적 절차를 제안하고, 제안 절차에서 수행되는 네트워크 및 디바이스의 동작을 정의한다. 이를 통해 본 연구는 GSM 네트워크에서 높은 에너지 소모 요구사항을 가지는 CIoT 서비스를 지원하는 것에 대한 가능성을 보인다.

정역전이 가능한 SCR 서보증폭기에 관한 연구 (A Study on the Reversible SCR Servo Amplifier)

  • 안병원;박상길
    • 수산해양기술연구
    • /
    • 제31권2호
    • /
    • pp.190-198
    • /
    • 1995
  • 전원을 단락시킴이 없는 SCR이중 브리지 트리거 방식을 고안하여, 정역전이 가능한 SCR 서보증폭기로 구성하여 본 결과 다음과 같은 결론을 내릴 수 있었다. I. 출력전압의 부호를 변경시킬 때 현재의 전언부호가 반전될 때까지 도통 상태를 유지시키다가, 전원부호가 반전된 이후 적절한 SCR을 도통 시킴으로서 크리거 실패가 없게 되어, 전원을 단락시키지 않게 되고 SCR의 소손을 막을 수 있었다. II. -에서 약 30Hz 부근까지는 60Hz의 전원으로서 원하는 출력을 표현할 수 있었는데, 이는 대형 직류 전동기의 동특성을 충분히 확보할 수 있는 값이다. III. 유도성 부하의 경우라도 이미 도통된 SCR을 통하여 유동성부하L에 저장될 수 있는 에너지의 총량은 전원의 반주기 시간과 전원이 파고치값 한계내이므로, 다음 반주기동안 부호만 반전된 전원 전압과 동일한 반주기의 시간이 존재하므로, 에너지 보존의 법칙에 의해 반드시 다음 반주기 안에 현재도통된 SCR은 소호되게 되므로 트리거실패는 존재하지 않는다.

  • PDF

Unexpected Restart Failure of Durable Left Ventricular Assist Devices: A Report of Two Cases

  • Hyo Won Seo;Ga Hee Jeong;Sung Min Kim;Minjung Bak;Darae Kim;Jin-Oh Choi;Kiick Sung;Yang Hyun Cho
    • Journal of Chest Surgery
    • /
    • 제57권3호
    • /
    • pp.315-318
    • /
    • 2024
  • The HeartWare Ventricular Assist Device (HVAD) was widely used for mechanical circulatory support in patients with end-stage heart failure. However, there have been reports of a critical issue with HVAD pumps failing to restart, or experiencing delays in restarting, after being stopped. This case report describes 2 instances of HVAD failure-to-restart during heart transplantation surgery and routine outpatient care. Despite multiple attempts to restart the pump using various controllers and extensions, the HVAD failed to restart, triggering a hazard alarm for pump stoppage. In one case, the patient survived after receiving a heart transplantation, while in the other, the patient died immediately following the controller exchange. These cases highlight the rare but life-threatening complication of HVAD failure-to-restart, underscoring the importance of awareness among clinicians, patients, and caregivers, and adherence to the manufacturer's guidelines and recommendations for HVAD management.