• Journal of Pharmaceutical Investigation
• /
• 제36권4호
• /
• pp.253-262
• /
• 2006

This study was performed to investigate the effects of treatment for dermatitis using the herbal gel preparations. Scutellariae Radix(SR) and Zingiberis Rhizoma(ZR) were used for the purpose of herbal preparations. Baicalin, baicalein are the ingredients of SR, having biological effects like anti-inflammatory, anti-oxidative, anti-bacterial and antiallergic action. 6-Gingerol is one of the ingredients of ZR having biologicai effects like anti-inflammatory and analgesic action. The three types of hydrogels(SRE, SRH, SZH) were formulated with Carbopol 940, Labrasol, Triethanolamine etc. Baicalin was hydrolysed to baicalein by $\beta$-glucuronidase for the purpose to increase rate of skin permeation. Content of ingredients by HPLC determination, rate of skin permeation using Franz type diffusion cell, anti-oxidative activity for the free radical, hydroxyl radical, superoxide, anti-inflammatory by using carrageenan injection, efficacy on the dermatitis induced by 2,4-dinitro-chlorobenzene(DNCB) were experimented. Baicalein showed higher permeability than baicalin, so it is considered that baicalein was more suitable form than baicalin for transdermal absorption by its lipophilic property. In the anti-oxidative experiments, SZH gel was the most effective scavenging activity than the other gels in all experiments. In anti-inflammatory test, SRM and SZH gel more decreased edma rapidly than SRE gel. In case of using SZH gel, treatment period for the dermatitis was more declined than that of other gel groups. These results suggests that the SZH hydrogel could be suitable preparations for the treatment of dermatitis.

• 공업화학
• /
• 제5권4호
• /
• pp.669-680
• /
• 1994

친유성기와 친수성기를 함유한 긴 탄화수소 화합물인 dodecylmetacrylate와 2-diethylaminoethyl methacrylate로부터 DMA-co-DAMA를 합성하고 물에 쉽게 유화시키기 위해 양이온화 하여 아세트화 아크릴 공중합체를 합성하였다. 합성된 공중합체와 아세트화 공중합체의 구조를 IR, NMR 등으로 확인하고 GPC로부터 분자량을 산출하였으며 C. H. N분석도 하였다. 아세트화 아크릴 공중합체는 물에 완전히 유화가 가능하였고 물에 대한 유화 안정성이 증진되었다. 위에서 합성한 아세트화 아크릴공중합체에 Sodium Silicate Sodium gluconate, Oleic acid, Triethanolamine을 브렌딩하여 제조된 혼화용 폴리머 분산제(PDCM-PDD)를 제조하였다. 이것을 가지고 용융시험한 결과 45배 희석시 강도비 1.02, 흡수비 0.36~0.57, 투수비는 수압 $100g/cm^2$에서 0.44, $3kg/cm^2$에서 0.55로 우수한 방수성을 확인하였다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2012년도 춘계학술발표대회
• /
• pp.99.1-99.1
• /
• 2012

The thin-film photovoltaic absorbers (CdTe and $Cu(In,Ga)Se_2$) can achieve solar conversion efficiencies of up to 20% and are now commercially available, but the presence of toxic (Cd,Se) and expensive elemental components (In, Te) is a real issue as the demand for photovoltaics rapidly increases. To overcome these limitations, there has been substantial interest in developing viable alternative materials, such as $Cu_2ZnSnS_4$ (CZTS) is an emerging solar absorber that is structurally similar to CIGS, but contains only earth abundant, non-toxic elements and has a near optimal direct band gap energy of 1.4 - 1.6 eV and a large absorption coefficient of ~104 $cm^{-1}$. The CZTS absorber layers are grown and investigated by various fabrication methods, such as thermal evaporation, e-beam evaporation with a post sulfurization, sputtering, non-vacuum sol-gel, pulsed laser, spray-pyrolysis method and electrodeposition technique. In the present work, we report an alternative aqueous chemical approach based on chemical bath deposition (CBD) method for large area deposition of CZTS thin films. Samples produced by our method were analyzed by scanning electron microscopy, X-ray diffraction, transmission electron microscopy, absorbance and photoluminescence. The results show that this inexpensive and relatively benign process produces thin films of CZTS exhibiting uniform composition, kesterite crystal structure, and some factors like triethanolamine, ammonia, temperature which strongly affect on the morphology of CZTS film.

• 한국재료학회지
• /
• 제16권8호
• /
• pp.524-528
• /
• 2006

On the synthesis of Au/$TiO_2$ core-shell structure nanoparticle, the effect of concentration of $Ti^{4+}$ and reaction temperature on the morphology and optical property of Au/$TiO_2$ core-shell nanoparticles is examined. A gold colloid was prepared by $HAuCl_4{\cdot}4H_2O\;and\;C_6H_5Na_3{\cdot}2H_2O$. Titanium stock solution was prepared by mixing solution of titanium(IV) isopropoxide (TTIP) and triethanolamine (TEOA). The concentrations of $Ti^{4+}$ stock solution were adjusted to $10.01{\sim}0.3$ mM, and then the gold colloid is added to the $Ti^{4+}$ stock solution. Au/$TiO_2$ core-shell structure nanoparticles could be prepared by the hydrolysis of the $Ti^{4+}$ stock solution at $80^{\circ}C$. The size of synthesized Au nanoparticles was 15 nm. The thickness of $TiO_2$ shell on the surface of gold particles was about 10 nm. The absorption peak of synthesized Au/$TiO_2$ core-shell nanoparticles shifted towards the red end of the spectrum by about 3 nm because of the formation of $TiO_2$ shell on the surface of gold particles. The good $TiO_2$ shell is produced when $Ti^{4+}$ concentration is varied between 0.01 and 0.05 mM, and reaction temperature is maintained at $80^{\circ}C$. The crystal structure of $TiO_2$ shell was amorphous.

• Computers and Concrete
• /
• 제22권2호
• /
• pp.153-159
• /
• 2018

Accelerators are used to speed up the construction by accelerating the setting time which helps in early removal of formwork thus leading to faster construction rate. Admixtures are used in mortar and concrete during or after mixing to improve certain properties of material which cannot be achieved in conventional cement mortar and concrete. The various industrial by products make nuisance and are hazardous to ecosystem as well. These wastes can be used in the construction industries to reduce the consumption of cement/aggregates, cost; and save the energy and environment by utilising waste and eliminate their disposal problem as well. The effect of calcium nitrate and triethanolamine (TEA) as accelerators and marble powder (MP) as waste material on the various properties of cement paste and mortar has been studied in the present work. The replacement ratio of MP was 0-10% @ 2.5% by weight of cement. The addition of calcium nitrate was 0% and 1%; and variation of addition of TEA was 0-0.1@ 0.025% and 0.1-1.0@ 0.1% by weight of cement. On the basis of setting time, some mix proportions were selected and further investigated. Setting time and soundness of cement paste; compressive strength and microstructure of mortar mix of selected mix proportions were studied experimentally at 3, 7 and 28 days aging. Results showed that use of MP, calcium nitrate, TEA and their combination reduced setting time of cement paste for all the mixes. Addition of calcium nitrate increased the compressive strength at all curing ages while MP and TEA decreased the compressive strength. The mechanism of additives was discussed through scanning electron microscope (SEM) and energy dispersive X-ray spectroscopy (EDS) analysis of the specimens.

• 약학회지
• /
• 제52권5호
• /
• pp.394-401
• /
• 2008

In order to access the suppressive effects of piroxicam (PX) and hydrolyzed products of Scutellariae Radix (PSH) on arthritis, we investigated whether PSH gel could suppress the progression of collagen-induced arthritis. PX, one of nonsteroidal anti-inflammatory drugs has been used in the systemic and topical treatment in a variety of inflammatory conditions. Scutellariae Radix, one of the herbal medicines, was used for the purpose of anti-inflammatory and anti-bacterials. For the purpose of transdermal absorption of the hydrogel preparations, two classes of hydrogels (PX, PSH) were formulated with carbomer 940, diethylene glycol monoethyl ether, polyethylene glycol-8-glyceryl caprylate/caprate and triethanolamine. In carrageenan-induced edema in rat hind paws, inhibition of foot swelling was more increased in PSH than PX hydrogel. Rheumatoid factors including serum IgG, IgM and collagen specific antibody were present much lower in PSH gel treated mice than control. Histological examination revealed that PSH hydrogel inhibited infiltration of inflammatory cells into affected paw joint, compared with control. The PSH hydrogel would be a suitable preparation to increase transdermal treatment for anti-inflammatory effects on collagen-induced arthritis.

• Safety and Health at Work
• /
• 제1권2호
• /
• pp.175-182
• /
• 2010

Objectives: This study examined how ethanolamines (EAs) with the same functional alcohol group ($HOCH_2CH_2$), such as mono-EA (MEA), di-EA (DEA), and tri-EA (TEA), in water-based metalworking fluids (wbMWFs) are vaporized, condensed, and transformed by heat generated during metalworking. Methods: Two types of experimental apparatus were manufactured to achieve these objectives. Results: Vaporization tests using a water bath showed that the vaporization rate increased markedly from $0.19\;mg/m^2{\cdot}min$ at $23.5^{\circ}C$ to $8.04\;mg/m^2{\cdot}min$ at $60^{\circ}C$. Chamber tests with a heat bulb revealed that "spiked" MEA was fully recovered, while only 13.32% of DEA and no TEA were recovered. Interestingly, non-spiked types of EAs were detected, indicating that heat could convert EAs with more alcohol groups (TEA or DEA) into other EAs with fewer group(s) (DEA or MEA). The EA composition in fresh fluid was 4% DEA, 66% TEA, and 30% MEA, and in used fluids (n = 5) was 12.4% DEA, 68% TEA, and 23% MEA. Conversion from TEA into DEA may therefore contribute to the DEA increment. Airborne TEA was not detected in 13 samples taken from the central coolant system and near a conveyor belt where no machining work was performed. The DEA concentration was $0.45\;mg/m^3$ in the only two samples from those locations. In contrast, airborne MEA was found in all samples (n = 53) regardless of the operation type. Conclusion: MEAs easily evaporated even when MWFs were applied, cleaned, refilled, and when they were in fluid storage tanks without any metalworking being performed. The conversion of TEA to DEA and MEA was found in the machining operations.

• Advances in nano research
• /
• 제4권1호
• /
• pp.1-14
• /
• 2016

Superparamagnetic iron oxide nanoparticles (Nps), composed of magnetite, $Fe_3O_4$, or maghemite, ${\gamma}-Fe_2O_3$, core and biocompatible polymer shell, such as dextran or chitozan, have recently found wide applications in magnetic resonance imaging, contrast enhancement and hyperthermia therapy. For different diagnostic and therapeutic applications, current attempt is focusing on the synthesis and biomedical applications of various ferrite Nps, such as $CoFe_2O_4$ and $MnFe_2O_4$, differing from iron oxide Nps in charge, surface chemistry and magnetic properties. This study is focused on the synthesis of manganese ferrite, $MnFe_2O_4$, Nps by most commonly used chemical way pursuing better control of their size, purity and magnetic properties. Co-precipitation syntheses were performed using aqueous alkaline solutions of Mn(II) and Fe(III) salts and NaOH within a wide pH range using various hydrothermal treatment regimes. Different additives, such as citric acid, cysteine, glicine, polyetylene glycol, triethanolamine, chitosan, etc., were tested on purpose to obtain good yield of pure phase and monodispersed Nps with average size of ${\leq}20nm$. Transmission electron microscopy (TEM), X-ray diffraction, energy dispersive X-ray spectroscopy (EDX), $M\ddot{o}ssbauer$ spectroscopy down to cryogenic temperatures, magnetic measurements and inductively coupled plasma mass spectrometry were employed in this study.

• 한국환경보건학회지
• /
• 제46권6호
• /
• pp.702-709
• /
• 2020

Objectives: Hand sanitizer is made with ethyl alcohol as the main ingredient. Problems related to the use of hand sanitizers and cases of harm caused by the use of hand sanitizers are occurring. This study investigated the usage behavior and recognition level of people using hand sanitizer and identified the chemical components listed in the component label of hand sanitizer. In addition, the methanol and isopropanol contained in hand sanitizer were quantified using HS-GC-MSD. Methods: The investigation of the behavior and recognition of hand sanitizer usage was conducted through a survey of 143 college students and adults. The components marked on 34 types of hand sanitizers were investigated, and methanol and isopropanol concentrations were analyzed using the HS-GC-MSD method. Results: According to the survey, 57% of respondents use hand sanitizers two to three times per day, 92.3% of them do so when in public places and 41.3% of them do so at home. Ethanol, purified water, carbomer, glycerin, and triethanolamine were the ingredients listed in the hand sanitizer. Among the 34 samples, methanol and isopropyl alcohol were detected in 33 samples, the concentration range for methanol was ND-567 ppm, and the concentration range of isopropyl alcohol was ND-2121 ppm. Conclusion: The results of this study have shown that hand sanitizers are being used constantly every day, and methanol, which is not included in the marked content, was detected in a significant concentration compared to wet tissue. It has been found that maintenance of hand sanitizer manufacturing standards and training on how to use them are needed.

• 한국결정성장학회지
• /
• 제20권5호
• /
• pp.221-226
• /
• 2010

메칠멜캅탄($CH_3SH$) 가스를 검출하는 수정진동자(QCM) 가스센서를 QCM의 전극에 $TiO_2$ 나노입자와 전해질 폴리머를 증착하여 제조하였다. LBL-SA법에 의해 제조된 $TiO_2$/PSS 박막은 높은 비표면적을 나타내었고, 가스센서의 감도를 증가시켰다. 1.0 ppm의 농도를 갖는 메칠멜캅탄에 노출된 TEA 혹은 $TiO_2$/PSS 막이 증착된 QCM의 주파수 변이는 각각 약 9 Hz, 2 Hz 였다. ($TiO_2$/PSS) 박막의 증착수가 늘어남에 따라 제조된 박막의 비표면적이 증가하게 되어 QCM 센서의 주파수 변이도 점차적으로 증가하였다. 추가적으로 메칠멜캅탄 가스의 농도가 0.5 ppm에서 2.0 ppm으로 높아짐에 따라 QCM 센서의 주파수 변화도 증가되었다. 본 연구에서는, ($TiO_2$/PSS) 박막이 증착된 QCM 센서의 표면구조의 변화와 센서 특성을 측정하였다.