• 제목/요약/키워드: triangular mesh

검색결과 190건 처리시간 0.025초

단면정보로부터 3차원 근사곡면의 생성 (3D Surface Approximation to Serial 2D Cross Sections)

  • 박형준;김광수
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1994년도 추계학술대회 논문집
    • /
    • pp.719-724
    • /
    • 1994
  • This paper describes a hybrid surface-based method for smooth 3D surface approximation to a sequence of 2D cross sections. The resulting surface is a hybrid G $^{1}$ surface represented by a mesh of triangular and rectangular Bezier patches defined on skinning, branching, or capping regions. Each skinning region is approximated with a closed B_spline surface, which is transformed into a mesh of Bezier patches. Triangular G $^{1}$ surfaces are constructed over brabching and capping regions such that the transitions between each capping regions such that the transitions between each triangular surface and its neighboring skinning surfaces are G $^{1}$ continuous. Since each skinning region is represented by an approximated rectangular C $^{2}$ suface instead of an interpolated trctangular G $^{[-1000]}$ surface, the proposed method can provide more smooth surfaces and realize more efficient data reduction than triangular surfacebased method.

  • PDF

An Active Contour Approach to Extract Feature Regions from Triangular Meshes

  • Min, Kyung-Ha;Jung, Moon-Ryul
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제5권3호
    • /
    • pp.575-591
    • /
    • 2011
  • We present a novel active contour-based two-pass approach to extract smooth feature regions from a triangular mesh. In the first pass, an active contour formulated in level-set surfaces is devised to extract feature regions with rough boundaries. In the second pass, the rough boundary curve is smoothed by minimizing internal energy, which is derived from its curvature. The separation of the extraction and smoothing process enables us to extract feature regions with smooth boundaries from a triangular mesh without user's initial model. Furthermore, smooth feature curves can also be obtained by skeletonizing the smooth feature regions. We tested our algorithm on facial models and proved its excellence.

삼각 메쉬를 위한 기하학 스네이크 (Geometric Snakes for Triangular Meshes)

  • 이윤진;이승용
    • 한국컴퓨터그래픽스학회논문지
    • /
    • 제7권3호
    • /
    • pp.9-18
    • /
    • 2001
  • 삼각 메쉬의 특징점을 찾는 것은 메쉬 편집, 메쉬 몰핑, 메쉬 압축, 메쉬 신호처리 등 여러 가지 응용 분야에서 중요하게 사용된다. 본 논문에서는 삼각 메쉬의 특징점을 찾기 위한 방법으로 기하학 스네이크를 제시하였다. 기하학 스네이크는 영상 스네이크를 확장한 것으로, 사용자가 초기 위치를 정하면 에너지 함수를 최소화함으로써 가까이에 있는 특징점을 찾는다. 기하학 스네이크는 항상 메쉬 표면 위에서만 이동하여야 하므로 메쉬를 매개 변수화하여 스네이크를 이차원 상에 매핑된 메쉬상에서 이동시켰다. 스네이크를 특징점으로 이동시키기 위한 외부 에너지는 메쉬 표면의 노말 변화를 이용하여 계산하였다.

  • PDF

영역기반 해쉬구조를 이용한 효율적 삼각형 자동 요소망 생성 알고리듬 개발 (An Efficient Triangular Mesh Generation Algorithm using Domain-wise Hash Structure)

  • 김태주;조진연
    • 한국항공우주학회지
    • /
    • 제32권9호
    • /
    • pp.41-48
    • /
    • 2004
  • 본 논문에서는 빠른 요소망 자료 처리를 위해 영역기반 해쉬구조를 개발하고 이에 기반한 효율적 삼각형 자동 요소망 생성 알고리듬을 제안하였다. 제안된 알고리듬에서는 신속하게 최적의 절점을 생성하고 삼각형 생성시 예외처리를 줄일 수 있도록 Advancing layer method 와 Delaunay 삼각화 방법이 함께 이용되었다. 본 알고리듬의 성능을 검증하기 위하여 개발된 2차원 자동 요소망 생성 프로그램을 이용하여 볼록한 모델, 오목한 모델 및 복잡한 형태의 모델에 대한 요소망 생성 테스트를 수행하고, 그 성능을 상용 소프트웨어와 비교하였다.

STL 파일 모델로부터 유한 요소망 자동 생성 (Generating FE Mesh Automatically from STL File Model)

  • 박정민;권기연;이병채;채수원
    • 대한기계학회논문집A
    • /
    • 제31권7호
    • /
    • pp.739-746
    • /
    • 2007
  • Recently, models in STL files are widely used in reverse engineering processes, CAD systems and analysis systems. However the models have poor geometric quality and include only triangles, so the models are not suitable for the finite element analysis. This paper presents a general method that generates finite element mesh from STL file models. Given triangular meshes, the method estimates triangles and makes clusters which consist of triangles. The clusters are merged by some geometric indices. After merging clusters, the method applies plane meshing algorithm, based on domain decomposition method, to each cluster and then the result plane mesh is projected into the original triangular set. Because the algorithm uses general methods to generate plane mesh, we can obtain both tri and quad meshes unlike previous researches. Some mechanical part models are used to show the validity of the proposed method.

3차원 삼각형 메쉬를 정확하고 효율적으로 학습하기 위한 CNN 아키텍처 (CNN Architecture for Accurately and Efficiently Learning a 3D Triangular Mesh)

  • 나홍은;김종현
    • 한국컴퓨터정보학회:학술대회논문집
    • /
    • 한국컴퓨터정보학회 2023년도 제67차 동계학술대회논문집 31권1호
    • /
    • pp.369-372
    • /
    • 2023
  • 본 논문에서는 삼각형 구조로 구성된 3차원 메쉬(Mesh)에서 합성곱 신경망(Convolution Neural Network, CNN)을 응용하여 정확도가 높은 새로운 학습 표현 기법을 제시한다. 우리는 메쉬를 구성하고 있는 폴리곤의 edge와 face의 로컬 특징을 기반으로 학습을 진행한다. 일반적으로 딥러닝은 인공신경망을 수많은 계층 형태로 연결한 기법을 말하며, 주요 처리 대상은 1, 2차원 데이터 형태인 오디오 파일과 이미지였다. 인공지능에 대한 연구가 지속되면서 3차원 딥러닝이 도입되었지만, 기존의 학습과는 달리 3차원 딥러닝은 데이터의 확보가 쉽지 않다. 혼합현실과 메타버스 시장의 확대로 인해 3차원 모델링 시장이 증가하고, 기술의 발전으로 데이터를 획득할 수 있는 방법이 생겼지만, 3차원 데이터를 직접적으로 학습에 이용하는 방식으로 적용하는 것은 쉽지 않다. 그렇게 때문에 본 논문에서는 산업 현장에서 이용되는 데이터인 메쉬 구조를 폴리곤의 최소 단위인 삼각형 형태로 구성하여 학습 데이터를 구성해 기존의 방법보다 정확도가 높은 학습 기법을 제안한다.

  • PDF

해상 풍력 타워에 관한 자동요소 생성법 (Automatic Mesh Generation Method on The Offshore Wind Tower)

  • 김남형;강현진
    • 한국해양환경ㆍ에너지학회지
    • /
    • 제16권2호
    • /
    • pp.130-137
    • /
    • 2013
  • 더욱 정확한 수치 해석이 필요하면 할수록, 해석하고자 하는 구조물 상의 절점과 요소를 적절하게 배치하는 것이 중요하게 된다. 본 연구에서는 천해영역에서 구조적인 이점과 경제성의 두 가지 장점을 가지고 있는 원형 단면의 하부 구조물에 대한 3차원 삼각 Shell 요소 생성기법을 개발하였다. 높이와 형태와 같은 상세한 데이터를 입력하여 제어하는 것에 의해 기초와 타워를 다양한 유한요소 조건에서 고려할 수 있도록 하였다. 또한 기존의 3차원 Delaunay 삼각요소분할법을 사용한 결과의 수치와 비교, 검증하였으며, 현재 제안되어진 기초와 하부구조물에 적용한 요소 분할의 예를 들었다. 본 연구의 결과는 현존하거나 제안되어진 풍력 터빈의 기초부와 타워의 제원에 대해 다양하게 적용될 수 있을 것이라 사료된다.

A RENDERING ALGORITHM FOR HYBRID SCENE REPRESENTATION

  • Tien, Yen;Chou, Yun-Fung;Shih, Zen-Chung
    • 한국방송∙미디어공학회:학술대회논문집
    • /
    • 한국방송공학회 2009년도 IWAIT
    • /
    • pp.17-22
    • /
    • 2009
  • In this paper, we discuss two fundamental issues of hybrid scene representation: constructing and rendering. A hybrid scene consists of triangular meshes and point-set models. Consider the maturity of modeling techniques of triangular meshes, we suggest that generate a point-set model from a triangular mesh might be an easier and more economical way. We improve stratified sampling by introducing the concept of priority. Our method has the flexibility that one may easily change the importance criteria by substituting priority functions. While many works were devoted to blend rendering results of point and triangle, our work tries to render point-set models and triangular meshes as individuals. We propose a novel way to eliminate depth occlusion artifacts and to texture a point-set model. Finally, we implement our rendering algorithm with the new features of the shader model 4.0 and turns out to be easily integrated with existing rendering techniques for triangular meshes.

  • PDF

경계요소법을 위한 3차원 자동요소분할 (3D Automatic Mesh Generation Scheme for the Boundary Element Method)

  • 이향범;이상훈;김형석;이기식;한송엽
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1993년도 하계학술대회 논문집 B
    • /
    • pp.935-937
    • /
    • 1993
  • This paper presents a three dimensional automatic mesh generation scheme for the boundary element method, and this scheme can be applicable to practical problems of complex shape. The geometry of the problem is expressed as an assemblage of linear Coon's surfaces, and each surface is made up of four edge curves which are defined in the form of a parametric function. Curves are automatically segmented according to their characteristics. With these segments of curves, interior points and triangular mesh elements are generated in the parametric plane using Lindholm's method, and then their projection on the real surface forms the initial mesh. The refinement of initial mesh is performed so that the discrete triangular planes are close to the real continuous surfaces. The bisection method is used for the refinement. Finally, interior points in the refined mesh are rearranged so as to make each element be close with an equilateral triangle. An attempt has been made to apply the proposed method to a DY(Deflection Yoke) model.

  • PDF

Simulation of Stable Cloth on Triangular Mesh via LOD-Based Bending Springs on Strain-Based Dynamics

  • Jong-Hyun Kim
    • 한국컴퓨터정보학회논문지
    • /
    • 제28권9호
    • /
    • pp.73-79
    • /
    • 2023
  • 본 논문에서는 삼각형 메쉬(Triangular mesh) 기반에서 변형률 기반 동역학(Strain-based dynamics, SBD)을 안정적으로 표현할 수 있는 LOD(Level of detail)기반의 굽힘 스프링(Bending spring) 구조와 감쇠 기법에 대해 설명한다. SBD는 삼각형 메쉬의 에지 길이(Edge length) 기반의 에너지 대신 변형률(Strain)을 활용하여 탄성 에너지를 모델링한다. 하지만, 큰 외력이 발생하면 에지 기반으로 탄성 에너지를 계산하는 과정에서는 비정상적인 삼각형(Degenerate triangle)이 나타나고 이 문제는 불안정한 변형률을 계산하기 때문에 잘못된 방향으로 늘어나는 문제가 발생한다. 본 논문에서는 이 문제를 효율적으로 처리할 수 있는 LOD기반의 굽힘 스프링을 생성하고 에너지를 계산하는 방법에 대해 소개한다. 결과적으로 본 논문에서 제안하는 기법은 굽힘 스프링 기반의 SBD를 안정적이고 효율적으로 처리할 수 있기 때문에 옷감 시뮬레이션을 안정적으로 표현할 수 있다.