• Journal of Ceramic Processing Research
• /
• v.13 no.spc2
• /
• pp.394-397
• /
• 2012

In this work, we studied the influence of the dopant elements concentration on the properties of SnO2 thin films deposited by pulsed laser deposition. X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), Hall effect measurement and UV-Vis studies were performed to characterize the deposited films. XRD results showed that the films had polycrystalline nature with tetragonal rutile structure. FE-SEM micrographs revealed that the as deposited films composed of dense microstructures with uniform grain size distribution. All the films show n-type conduction and the best transparent conductive oxide (TCO) performance was obtained on 6 wt% Sb2O5 doped SnO2 film prepared at pO2 of 60mtorr and Ts of 500 ℃. Its resitivity, optical transmittance, figure of merit are 7.8 × 10-4 Ω cm, 85% and 1.2 × 10-2 Ω-1, respectively.

• Journal of the Korean institute of surface engineering
• /
• v.55 no.6
• /
• pp.363-367
• /
• 2022

Transparent ZnO/Ti/ZnO (ZTZ) tri-layered films were prepared with radio frequency (RF) and direct current (DC) magnetron sputtering on the glass substrate. The thickness of the ZnO and Ti films was kept at 50 and 10 nm to consider the effect of the electron irradiation on the crystallization and optoelectrical properties of the films. From the XRD spectra, post-depostion electron irradiated films showed the characteristic peaks of ZnO(002) and Ti(200), respectively. the observed grain size of the ZnO(002) and Ti(200) enlarged up to 18.27 and 12.16 nm at an irradiation condition of 750 eV. In the figure of merit which means an optoelectrical performance of the films, as deposited films show a figure of merit of 2.0×10^-5 𝛺^-1, while the films electron irradiated at 750 eV show a higher figure of merit of 5.7×10^-5 𝛺^-1.

• The Journal of Engineering Geology
• /
• v.20 no.3
• /
• pp.297-310
• /
• 2010

This study represents basic research into the utilization of mixed ash (fly ash and bottom ash) from the ash pond of the Taean Thermal Power Plant as a construction material. We conducted physical and mechanical experiments on the mixed ash and examined its engineering characteristics in terms of its use as a material for road landfill and structure backfill. We evaluated the physical and chemical characteristics of the ash by performing tests to determine specific gravity, maximum and minimum density, liquid limit and plastic limit, grain size distribution, composition (by X-ray diffraction), and loss on ignition. We also evaluated the mechanical characteristics by testing for permeability, compaction, CBR, and tri-axial compression. The experiments on the mixed ash yielded a specific gravity of 2.18-2.20, dry density of $9.38-13.32\;kN/m^3$, modified CBR of 16.5%-21%, permeability coefficient of 1.32 to $1.89-10^{-4}cm/sec$, and drained friction angle of $36.43^{\circ}-41.39^{\circ}$. The physical and mechanical properties of the mixed ash do not meet the quality standards stipulated for road landfill and structure backfill materials. Mixed ash with a high content of fly ash failed to meet some of the quality standards. Therefore, in order to utilize the mixed ash as a material for road landfill and structure backfill, it is necessary to improve its properties by mixing with bottom ash.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.92-92
• /
• 2022

In preparation for the ever-changing climate and unification of North Korea and South Korea, it is necessary to increase the grain self-sufficiency rate by selecting crops with good utilization in high-altitude regions. The principle is to sow pastures at the end of August. However, sowing occurs in spring because the sowing period is missed when the weather is bad or when the workforce is insufficient. Sometimes when the grassland is completely devastated, it is frequently sowed in spring. In addition, North Korea consists of a high-altitude regions, and has been devastated in a general mountainous region. As a result, the landscape is not good and it is vulnerable to natural disasters such as landslides. Therefore, to prevent this, pasture must be sowed in the high-altitude regions. The goal of this study was to evaluate and compare yield and feed value of pasture species and varieties by spring sowing in high-latitude regions. The study was conducted in Pyeongchang, Gangwon-do, which is 700m height above sea level. The pasture species and varieties was sown on April 24, 2022. Each treatment was carried out by sowing 30 kg/ha, the experiment field size was 1 m²(1m×1m), and randomized block design with tri-repeat. The total of 14 varieties was used in the study, 6 varieties of Orchardgrass (OG), 6 varieties of Tall fescue (TF) and 2 varieties of Perennial ryegrass (PRG). The grassland composition fertilization using (N:P₂O₅:K₂O at 80:200:70 kg/ha) was conducted and management fertilizer was N:P₂O₅:K₂O at 210:150:180 kg/ha. The first harvest was June 26,2022 and the second harvest was on August 16, 2022. For statistical analysis of the data, an Analysis of Variance (ANOVA) was performed using the R3.6.3 software program, and all data was subjected to analysis using Duncan's multiple range test. Significance was set at the 5% level. The dry matter yield at the first harvest was the highest in PRG, and second harvest was the highest in TF (p < 0.05). Overall, PRG showed a trend of gradually decreasing growth, OG and TF showed a trend of gradually improving growth. This showed that PRG was considerably weaker to summer depression than other pasture species. Comparing the total dry matter yield, TF was the highest (4,565.45 kg/ha), but there was no significance difference with PRG (4,487.24 kg/ha) (p < 0.05). In addition, comparing the total TDN (total digestible nutrient) yield, TF was the highest (3147.33 kg/ha), second in PRG (2975.67 kg/ha) and third in OG (2052.33 kg/ha). Since this result is the data of the second harvests, if the result is derived by the end of next year, it will be provided as basic data for selection of pasture species and varieties suitable for spring seeding in high-altitude regions.

• Korean Journal of Plant Taxonomy
• /
• v.36 no.3
• /
• pp.163-187
• /
• 2006

Taxonomic studies were conducted to evaluate the interspecific relationships in Viola albida var. albida and its related taxa using seven populations for morphology, palynology and anatomy. Molecular phylogenetic studies were also examined in 28 populations including 19 Korean, four Chinese, two Japanese, one American population and two outgroups using nrITS, and 27 populations except V pinnata for trnL-F region of chloroplast DNA. Morphological differences was observed among seven populations of three species in leaf shape, but characters such as serrate number of leaf margins, petal size, pistil shape were showed overlap between populations. Pollen shape of seven populations was monad and grain shape on the polar axis was semi-angular. Morphology of aperture was tri-colporate, and the surface sculpturing was scabrate in rugulate. The grain shape of equatorial view of five populations was prolate whereas V albida var. taknhashii type 1 and V albida var. chaerophylloides type 3 were subprolate. The anatomical characters of rnidvein of leaf, petiole, peduncle, root were also described for the species. The stomatal apparatus of the leaves was observed only in abaxial surface, and the number of stoma per unit ($mm^2$) were abundant in incised than lobate or cleft margin of the leaves. The nrITS analysis shows that V. pinnata and V. dissecta was monophyletic and occupied a basal position in the V. albida var. albida and its related taxa. The other clade including infraspecific populations of V. albida, and V. eizanensis was paraphyletic. The trnL-F noncoding region analysis was similar to the ITS tree. According to the above observations in morphology, palynology, anatomy, and molecular phylogenetic analysis, the significant differences were not found except for leaf shape in Viola albida var. albida and its related taxa, therefore V. albida var. takanhashii and V. albida var. chaerophylloides were considered to be an infraspecific taxa of V. albida var. albida rather than an independent species, subvariety or variety of V. pinnata and V. dissecta.

• Food Science and Preservation
• /
• v.12 no.4
• /
• pp.310-316
• /
• 2005

This study was carried out to investigate the quality characteristics by packaging materials and storage temperature to predict safe storage period for milled rice. Mechanical taste value and whiteness of milled rices stored at room temperature were severely decreased than those of the stored at low temperature, but fat acidity and b value of those at room temperature was rapidly increased than those of stored at low temperature. Milled rice packed in LDPE film bag were smelled stale flavor after 4 months storage at room temperature, Hojinbyeo was not produced flour in the rice grain surface but Dongjinbyeo was showed production of flour. pH of milled rice of Dongjinbyeo and Hojinbyeo packed in LDPE film bag were the lowest showing 5.3 and 5.6, respectively after 6 months at mom temperature. Safe storage period of Dongjinbyeo and Hojinbyeo packed in craft paper bag were 1 month at room temperature, those of packed in LDPE film bag were 2 months. At low temperature safe storage period of Dongjinbyeo and Hojinbyeo packed in craft paper bag were 2 months, those of packed in LDPE film bag were 5 and 4 months, respectively.