• 한국의학물리학회지:의학물리
• /
• 제28권2호
• /
• pp.54-60
• /
• 2017

This study was designed to measure transit dose with an electronic portal imaging device (EPID) in eight patients treated with intensity modulated radiotherapy (IMRT), and to verify the accuracy of dose delivery to patients. The calculated dose map of the treatment planning system (TPS) was compared with the EPID based dose measured on the same plane with a gamma index method. The plan for each patient was verified prior to treatment with a diode array (MapCHECK) and portal dose image prediction (PDIP). To simulate possible patient positioning errors during treatment, outcomes were evaluated after an anthropomorphic phantom was displaced 5 and 10 mm in various directions. Based on 3%/3 mm criteria, the $mean{\pm}SD$ passing rates of MapCHECK, PDIP (pre-treatment QA) for 47 IMRT were $99.8{\pm}0.1%$, $99.0{\pm}0.7%$, and, respectively. Besides, passing rates using transit dosimetry was $90.0{\pm}1.5%$ for the same condition. Setup errors of 5 and 10 mm reduced the mean passing rates by 1.3% and 3.0% (inferior to superior), 2.2% and 4.3% (superior to inferior), 5.9% and 10.9% (left to right), and 8.9% and 16.3% (right to left), respectively. These findings suggest that the transit dose-based IMRT verification method using EPID, in which the transit dose from patients is compared with the dose map calculated from the TPS, may be useful in verifying various errors including setup and/or patient positioning error, inhomogeneity and target motions.

• 대한방사선치료학회지
• /
• 제26권2호
• /
• pp.355-362
• /
• 2014

목 적 : 두경부 치료 시 환자의 고정을 위해 고정용 열성형가면(Thermoplastic mask, mask)을 사용한다. 치료 중 변동의 오차가 적은 정위적방사선수술에 사용되는 특수 제작된 마스크를 토모치료에 적용 했을 때 표면선량의 변화의 경향을 알아보고 유용성을 평가해보고자 한다. 대상 및 방법 : 일반적인 마스크(conventional mask, C-mask)와 정위적방사선수술 마스크(SRS mask, S-mask)를 이용하여 인체팬텀(rando phantom)을 동일한 중심선으로 고정한 후 모의 치료를 실시하였다. 획득한 영상은 치료계획시스템(treatment planning system, TPS)을 이용하여 안와부와 침샘부위를 치료 부위로 설정하여 각 각의 토모치료계획을 세웠다. 마스크의 특성에 따른 표면선량 측정을 위해 정위적방사선수술 마스크를 기준으로 치료부위에 주변에 위치한 두꺼운 부분과 얇은 부분을 관심영역으로 설정하여 마스크의 종류에 따른 동일한 위치의 표면 선량을 비교해보았다. 그리고 토모치료기를 이용하여 모의치료와 동일한 조건으로 인체팬텀을 위치시키고 치료계획에서 설정된 관심영역의 위치에 Gafchromic EBT3 필름을 팬텀 표면에 부착 하여 마스크를 착용한 후 치료 조사하였다. 선량 농도 분석 시스템(RIT)을 이용하여 조사된 필름의 표면선량을 측정하여 마스크의 종류에 따른 표면선량 변화의 양상을 비교해보았다. 결 과 : TPS에서 마스크의 종류에 의한 표면선량 변화는 안와에서 0.65~2.53 Gy, 타액선에서 0.85~1.84 Gy의 측정 변화값을 보여주었다. Gafchromic EBT3 필름을 이용한 표면선량 측정에서는 안와에서 -0.2~+3.46 Gy, 타액선에서 1.04~3.02 Gy의 측정 변화값을 보여 주었다. Smask를 적용하였을 때 C-mask를 기준으로 하였을 때 TPS에서 최대 4.26% Gafchromic EBT3 필름에서 최대 5.82%의 각 각의 표면선량 증가 경향을 나타내었다. 결 론 : S-mask의 사용으로 인한 표면선량은 무작위적으로 변하였으나 대체적으로 유효한 범위 안에 들어옴을 알 수 있었다. 본 연구에서는 표면선량의 변화값을 극대화 하기 위해 표면에 위치한 표적을 실험 하였으며 치료 표적이 심부에 위치할 경우와 치료 계획의 조건에 따라 표면 선량은 더 감소할 것으로 생각되어지며 이는 마스크에 따른 표면선량의 차이는 피부 부작용에 영향을 미치지 않을 것으로 사료된다. 그리고 치료 중 또는 치료 간 위치변화 감소의 장점은 치료 표적이 작고 결정 장기가 밀접한 경우 S-mask의 두경부 치료 적용은 유용할 것으로 사료된다.

• 한국의학물리학회지:의학물리
• /
• 제23권3호
• /
• pp.188-198
• /
• 2012

본 연구의 목적은 국내 개발된 치료계획장치(Treatment Planning System, TPS)인 CorePLAN$^{TM}$에서의 빔 모델링을 기반으로 하는 Collapsed Cone Convolution (CCC) 선량 계산 알고리듬의 정확성을 평가하는 것이다. 여러 셋업 조건에 따라 빔 모델을 TPS에 생성하였고, 6 MV와 15 MV 광자 에너지에 대하여 $50{\times}50{\times}50cm^3$의 물 팬톰 내에서 CCC 알고리듬을 사용하여 선량 계산을 하였다. 대상 조사면은 $4{\times}4cm^2$, $6{\times}6cm^2$, $10{\times}10cm^2$, $20{\times}20cm^2$, $30{\times}30cm^2$와 $40{\times}40cm^2$을 대상으로 하였고, 각각에 대하여 열린 조사면과 쐐기 조사면으로 구분하였다. 생성된 빔 모델들은 측정된 데이터와 계산된 데이터의 심부선량백분율(Percent depth dose, PDD)과 선량프로파일(lateral profile)을 비교하여 모든 깊이에서도 잘 맞는지 평가하였다. 측정된 방사선량과 CorePLAN$^{TM}$에서 CCC 알고리듬을 이용하여 계산된 방사선량은 PDD에 있어 build-up 영역을 제외하고 열린 조사면은 최대 2%, 쐐기 조사면는 최대 3% 이내로 일치하였다. 선량프로파일은 조사면 내 영역에서는 1%, 반음영 영역에서는 4% 이내로 일치함을 확인하였다. 모든 조사면에서 반음영을 제외한 $10{\times}10cm^2$에서 최대 $40{\times}40cm^2$까지의 선량프로파일에 대하여 측정된 방사선량과 계산된 방사선량이 3% 이내로 일치하였다. 반면에, 열린 조사면에 비하여 쐐기 조사면에서 선량 차이가 뿔(horn) 영역의 가장자리에서 4%까지 높게 나타났다. 본 연구 결과에서 보여주는 선량 차이는 일부 영역을 제외하고 국제 기준에 적합한 결과값을 보였다. 선량 차이가 크게 발생하는 영역은 임상적으로 중요성이 크지 않은 표면 영역임을 감안할 때, 임상에서의 활용이 가능하리라 기대된다.

• 한국의학물리학회지:의학물리
• /
• 제30권1호
• /
• pp.32-38
• /
• 2019

Purpose: The objective of this study is to evaluate the geometrical accuracy of a patient-specific bolus based on a three-dimensional (3D) printed mold and casting method. Materials and Methods: Three breast cancer patients undergoing treatment for a superficial region were scanned using computed tomography (CT) and a designed bolus structure through a treatment planning system (TPS). For the fabrication of patient-specific bolus, we cast harmless certified silicone into 3D printed molds. The produced bolus was also imaged using CT under the same conditions as the patient CT to acquire its geometrical shape. We compared the shapes of the produced bolus with the planned bolus structure from the TPS by measuring the average distance between two structures after a surface registration. Results and Conclusions: The result of the average difference in distance was within 1 mm and, as the worst case, the absolute difference did not exceed ${\pm}2mm$. The result of the geometric difference in the cross-section profile of each bolus was approximately 1 mm, which is a similar property of the average difference in distance. This discrepancy was negligible in affecting the dose reduction. The proposed fabrication of patient-specific bolus is useful for radiation therapy in the treatment of superficial regions, particularly those with an irregular shape.

• 대한방사선기술학회지:방사선기술과학
• /
• 제42권3호
• /
• pp.217-222
• /
• 2019

The purpose of this study is to evaluate the dose distribution by gantry rotation and MLC moving speed on treatment planning system(TPS) and linear accelerator. The dose analyzer phantom(Delta 4) was scanned by CT simulator for treatment planning. The planning target volumes(PTVs) of prostate and pancreas was prescribed 6,500 cGy, 5,000 cGy on VMAT(Volumetric Modulated Arc Therapy) by TPS while MLC speed changed. The analyzer phantom was irradiated linear accelerator using by planned parameters. Dose distribution of PTVs were evaluated by the homogeneity index, conformity index, dose volume histogram of organ at risk(rectum, bladder, spinal cord, kidney). And irradiated dose analysis were evaluated dose distribution and conformity by gamma index. The PTV dose of pancreas was 4,993 cGy during 0.1 cm/deg leaf and gantry that was the most closest prescribed dose(5,000 cGy). The dose of spinal cord, left kidney, and right kidney were accessed the lowest during 0.1 cm/deg, 1.5 cm/deg, 0.3 cm/deg. The PTV dose of prostate was 6,466 cGy during 0.1 cm/deg leaf and gantry that was the most closest prescribed dose(6,500 cGy). The dose of bladder and rectum were accessed the lowest during 0.3 cm/deg, 2.0 cm/deg. For gamma index, pancreas and prostate were analyzed the lowest error 100% at 0.8, 1.0 cm/deg and 99.6% at 0.3, 0.5 cm/deg. We should used the optimal leaf speed according to the gantry rotation if the treatment cases are performed VMAT.

• 한국의학물리학회지:의학물리
• /
• 제25권4호
• /
• pp.193-198
• /
• 2014

본 연구의 목적은 새로 개발된 2차원 토모테라피 선량측정 시스템의 가능성을 알아보는 것이다. 방사선이 조사되면 가시광성을 내보내는 인광판을 원통형 물팬텀에 삽입하였다. 치료계획장치에서 원 모양, C자 모양, 다중표적 3종류의 가상의 표적을 만들고 각 표적에 10 Gy의 방사선을 전달하도록 하였다. 원통형 팬텀을 토모테라피 치료테이블위에 올려놓고 치료계획대로 방사선을 조사하였다. CCD카메라로 쵤영된 모든 프레임은 누적되었고 각 픽셀은 선량으로 변환되었다. 인광판으로부터 나온 영상은 치료계획장치에서 계산된 선량분포와 비교하였다. 선량기울기(dose rate)와 픽셀값의 관계그래프는 선량기울기 900 MU/min 까지 포화(saturated)되지 않았다. 인광판의 선형성 보정이 개선된다면 인광판과 CCD카메라를 이용한 토모테라피의 2차원 선량측정이 유용할 것으로 기대한다.

• 한국의학물리학회지:의학물리
• /
• 제32권4호
• /
• pp.99-106
• /
• 2021

Purpose: In this study, we aimed to manufacture a patient-specific gel phantom combining three-dimensional (3D) printing and polymer gel and evaluate the radiation dose and dose profile using gel dosimetry. Methods: The patient-specific head phantom was manufactured based on the patient's computed tomography (CT) scan data to create an anatomically replicated phantom; this was then produced using a ColorJet 3D printer. A 3D polymer gel dosimeter called RTgel-100 is contained inside the 3D printing head phantom, and irradiation was performed using a 6 MV LINAC (Varian Clinac) X-ray beam, a linear accelerator for treatment. The irradiated phantom was scanned using magnetic resonance imaging (Siemens) with a magnetic field of 3 Tesla (3T) of the Korea Institute of Nuclear Medicine, and then compared the irradiated head phantom with the dose calculated by the patient's treatment planning system (TPS). Results: The comparison between the Hounsfield unit (HU) values of the CT image of the patient and those of the phantom revealed that they were almost similar. The electron density value of the patient's bone and brain was 996±167 HU and 58±15 HU, respectively, and that of the head phantom bone and brain material was 986±25 HU and 45±17 HU, respectively. The comparison of the data of TPS and 3D gel revealed that the difference in gamma index was 2%/2 mm and the passing rate was within 95%. Conclusions: 3D printing allows us to manufacture variable density phantoms for patient-specific dosimetric quality assurance (DQA), develop a customized body phantom of the patient in the future, and perform a patient-specific dosimetry with film, ion chamber, gel, and so on.

• 대한방사선치료학회지
• /
• 제26권2호
• /
• pp.183-189
• /
• 2014

목 적 : 조영제는 CT모의치료시 정상조직과 악성종양을 구분하는데 뛰어난 대조도를 제공하기 때문에 CT모의치료에 널리 사용하고 있다. 하지만 조영제는 치료계획 CT에서 일시적으로 존재하기 때문에, 치료계획과 실제 치료 사이에는 Hounsfield Unit(HU)의 차이가 발생하게 된다. 이에 본 연구에서는 조영제 사용으로 인한 HU의 변화가 양성자 치료계획에 미치는 영향을 확인 하고자한다. 대상 및 방법 : 20명의 간암 환자에게서 Phase에 따른 HU값의 변화를 측정하였다, 그리고 5명의 양성자치료계획에서 HU변화에 따른 Range와 Spread-Out Bragg peak(SOBP)의 변화를 살펴보았다. Hand made water phantom을 이용하여 깊이와 HU의 변화에 따른 Range와 SOBP의 변화를 확인하였다. 결 과 : 20명 간암 환자의 HU 변화(Pre contrast, Arterial phase, Porta phase)는 간 조직에서 ($58{\pm}5.7$, $75{\pm}9.5$, $117{\pm}14.6$)이었으며 대동맥에서($40{\pm}6.1$, $279{\pm}49.0$, $154{\pm}22.8$)이었다. 5명의 간암 양성자치료계획에서 HU 변화에 따른 Range 변화는 평균 2.5 mm, SOBP 변화는 평균 1.4 mm 이었다. Hand made water phantom study에서는 HU가 증가함에 따라 Range는 감소되었고 SOBP는 줄어들었다. 결 론 : 양성자 치료계획에서 HU값의 변화는 양성자 Range와 SOBP를 변화시켰다. 실제 양성자 빔에서 HU 변화에 따른 Range와 SOBP의 변화에 대한 추가적인 연구가 필요할 것으로 사료 된다.

• 한국의학물리학회지:의학물리
• /
• 제25권2호
• /
• pp.65-71
• /
• 2014

A Varian Portal Dosimetry system was compared to an isocentrically mounted MapCHECK 2 diode array for volumetric modulated arc therapy (VMAT) QA. A Varian TrueBeam STx with an aS-1000 digital imaging panel was used to acquire VMAT QA images for 13 plans using four photon energies (6, 8, 10 and 15 MV). The EPID-based QA images were compared to the Portal Dose Image Prediction calculated in the Varian Eclipse treatment planning system (TPS). An isocentrically mounted Sun Nuclear MapCHECK 2 diode array with 5 cm water-equivalent buildup was also used for the VMAT QAs and the measurements were compared to a composite dose plane from the Eclipse TPS. A ${\gamma}$ test was implemented in the Sun Nuclear Patient software with 10% threshold and absolute comparison at 1%/1 mm (dose difference/distance-to-agreement), 2%/2 mm, and 3%/3 mm criteria for both QA methods. The two-tailed paired Student's t-test was employed to analyze the statistical significance at 95% confidence level. The average ${\gamma}$ passing rates were greater than 95% at 3%/3 mm using both methods for all four energies. The differences in the average passing rates between the two methods were within 1.7% and 1.6% of each other when analyzed at 2%/2 mm and 3%/3 mm, respectively. The EPID passing rates were somewhat better than the MapCHECK 2 when analyzed at 1%/1 mm; the difference was lower for 8 MV and 10 MV. However, the differences were not statistically significant for all criteria and energies (p-values >0.05). The EPID-based QA showed large off-axis over-response and dependence of ${\gamma}$ passing rate on energy, while the MapCHECK 2 was susceptible to the MLC tongue-and-groove effect. The two fluence-based QA techniques can be an alternative tool of VMAT QA to each other, if the limitations of each QA method (mechanical sag, detector response, and detector alignment) are carefully considered.

• Journal of the Korean Physical Society
• /
• 제73권10호
• /
• pp.1571-1576
• /
• 2018

We developed and evaluated an algorithm to calculate the target radiation dose in cancer patients by measuring the transmitted dose during 3D conformal radiation treatment (3D-CRT) treatment. The patient target doses were calculated from the transit dose, which was measured using a glass dosimeter positioned 150 cm from the source. The accuracy of the transit dose algorithm was evaluated using a solid water phantom for five patient treatment plans. We performed transit dose-based patient dose verification during the actual treatment of 34 patients who underwent 3D-CRT. These included 17 patients with breast cancer, 11 with pelvic cancer, and 6 with other cancers. In the solid water phantom study, the difference between the transit dosimetry algorithm with the treatment planning system (TPS) and the measurement was $-0.10{\pm}1.93%$. In the clinical study, this difference was $0.94{\pm}4.13%$ for the patients with 17 breast cancers, $-0.11{\pm}3.50%$ for the eight with rectal cancer, $0.51{\pm}5.10%$ for the four with bone cancer, and $0.91{\pm}3.69%$ for the other five. These results suggest that transit-dosimetry-based in-room patient dose verification is a useful application for 3D-CRT. We expect that this technique will be widely applicable for patient safety in the treatment room through improvements in the transit dosimetry algorithm for complicated treatment techniques (including intensity modulated radiation therapy (IMRT) or volumetric modulated arc therapy (VMAT).