• Proceedings of the KIEE Conference
• /
• 1987.11a
• /
• pp.293-295
• /
• 1987

This paper deals with the dielectric properties dielectric breakdown strength and mechanical tensile properties according to heat - treatment condition of polyurethane resin. This resin is heat - treated over a range of temperature from $50^{\circ}C$ to $150^{\circ}C$. It is shown that the dielectric dissipation factor decreases with increase of heat - treatment temperature of the sample exept for the sample heat - treated at $150^{\circ}C$. The maximum dielectric breakdown strength is appeared for the sample heat - treated for 10 hours at $100^{\circ}C$, after curing for 24 hours at room temperature. The optimal heat - treatment condition in the view point of the electrical and mechanical properties is appeared for the sample heat - treated for 10 hours at $100^{\circ}C$, after curing for 24 hours at room temperature.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.2
• /
• pp.278-282
• /
• 2012

The objectives of this study was to compare the physicochemical properties and antioxidant activities of raw, microwave-treated, steam-treated and high temperature and pressure-treated garlic. The hardness and strength of microwave-treated and steam-treated garlic decreased compared to raw garlic. The hardness and softness increased but strength decreased in dried garlic-treated at $60^{\circ}C$ for 48 hr. The reducing sugar content of raw garlic was 0.041 g/100 g, and reducing sugar content of high temperature and pressure-treated garlic increased temperature. Total polyphenol content of microwave-treated and steam-treated decreased compared to raw garlic, while that of high temperature and pressure-treated increased with increasing temperature. $IC_{50}$ value of the electron donating ability of raw garlic was 3.07 mg/mL, and the highest $IC_{50}$ value was 2.16 mg/mL for microwave-treated garlic at the 4 min. The ABTS radical scavenging activity of raw garlic was 40.94 mg AEAC/mL, and the highest AEAC value was 76.51 mg AEAC/mL with high temperature and pressure-treated garlic at $150^{\circ}C$ at the 2 hr.

• Journal of Welding and Joining
• /
• v.20 no.4
• /
• pp.498-504
• /
• 2002

Fluxless flip chip bonding process using plasma treatment instead of flux was investigated. The effect of plasma process parameters on tin-oxide etching characteristics were estimated with Auger depth profile analysis. The die shear test was performed to evaluate the adhesion strength of the flip chip bonded after plasma treatment. The thickness of oxide layer on tin surface was reduced after Ar+H2 plasma treatment. The addition of H2 improved the oxide etching characteristics by plasma. The die shear strength of the plasma-treated Sn-Pb solder flip chip was higher than that of non-treated one but lower than that of fluxed one. The difference of the strength between plasma-treated specimen and non-treated one increased with increase in bonding temperature. The plasma-treated flip chip fractured at solder/TSM interface at low bonding temperature while the fracture occurred at solder/UBM interface at higher bonding temperature.

• Textile Coloration and Finishing
• /
• v.20 no.4
• /
• pp.53-59
• /
• 2008

For the modification of wool surface, wool fabrics treated with oxygen low-temperature plasma(LTP) and dichloroisocyanuric acid(DCCA) were dyed with milling type acid dye. The difference of dyeing properties on modified and control wool fabric were investigated. DCCA treated wool showed that saturation dye uptake and dyeing desorption ratio were higher than LTP treated wool. Dyeing transition temperatures of DCCA and LTP treated wool fabrics were 20$^{\circ}C$ degree lower than control wool fabric. In light color fastness test, DCCA treated wool fabric was 1 grade lower than LTP or control wool fabric.

• Fibers and Polymers
• /
• v.7 no.3
• /
• pp.262-269
• /
• 2006

In this paper, the effects of low temperature plasma (LTP) treatment on the dyeing properties of the wool fiber were studied. The wool fibers were treated with oxygen plasma and three types of dye that commonly used for wool dyeing, namely: (i) acid dye, (ii) chrome dye and (iii) reactive dye, were used in the dyeing process. For acid dyeing, the dyeing rate of the LTP-treated wool fiber was greatly increased but the final dyeing exhaustion equilibrium did not show any significant change. For chrome dyeing, the dyeing rate of the LTP-treated wool fiber was also increased but the final dyeing exhaustion equilibrium was only increased to a small extent. In addition, the rate of afterchroming process was similar to the chrome dyeing process. For the reactive dyeing, the dyeing rate of the LTP-treated wool fiber was greatly increased and also the final dyeing exhaustion equilibrium was increased significantly. As a result, it could conclude that the LTP treatment could improve the dyeing behavior of wool fiber in different dyeing systems.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2000.09a
• /
• pp.397-406
• /
• 2000

Hopkinson effect in the HDDR-treated Nd$\sub$15/Fe$\sub$77/B$\sub$8/ alloy was examined in detail by means of a thermomagnetic analysis with low magnetic field (600 Oe). The emergence and magnitude of maximum in magnetisation in the thermomagnetic curve due to the Hopkinson effect was correlated to the grain structure and coercivity of the HDDR-treated material. the HDDR-treated materials showed clear Hopkinson effect (maximum in magnetisation just below the Curie temperature of the Nd$\sub$2/Fe$\sub$14/B phase) on heating in the thermomagnetic curve. Magnitude of the magnetisation rise due to the Hopkinson effect became smaller as the recombination time increased. The magnetisation recovery at room temperature on cooling from above the Curie temperature became smaller as the recombination time increased. The HDDR-treated materials with shorter recombination time, finer grain size and higher coercivity showed larger magnetisation maximum due to Hopkinson effect in the thermomagnetic curve.

• Journal of Magnetics
• /
• v.6 no.2
• /
• pp.61-65
• /
• 2001

The Hopkinson effect in the HDDR-treated $Nd_{15}Fe_{77}B_8$ allay was examined in detail by means of a thermo-magnetic analysis with low magnetic field (600 Oe). The emergence and magnitude of maximum in magnetisation in the thermomagnetic curve due to the Hopkinson effect was correlated with the grain structure and coercivity of the HDDR-treated material. The HDDR-treated materials showed a clear Hopkinson effect (maximum in magnetisation just below the Curie temperature of the $Nd_2Fe_{14}B\;$ phase) on heating. The magnitude of the magnetisation rise due to the Hopkinson effect became smaller as the recombination time increased. The magnetisation recovery at room temperature on cooling from above the Curie temperature became smaller as the recombination time increased. The HDDR-treated materials with shorter recombination time, finer grain size and higher coercivity showed larger magnetisation maximum due to the Hopkinson effect in the thermo-magnetic curve.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.199-199
• /
• 2017

This study investigated the aspects of damage due to low temperature treatment in order to establish the damage criterion according to low temperature invasion during regeneration period in wheat after regeneration period in the early spring. We cultivated wheat cultivar 'Geumgang' in Wagner pots and treated them with three types of low temperature, and the gradual temperature change program was set in a low temperature incubator for 12.5 h per day for 5 days during the night time when the length of young spikes was about 1 mm. All treatments except for the control were treated in 5 steps for each temperature. Treatment 1 was treated at the lowest temperature $-5^{\circ}C$ for 5 h, treatment 2 for 7 h at $-5^{\circ}C$, and treatment 3 for 9 h at $-5^{\circ}C$. The most common type of damage was partial infertility, and there were some discolored spikes. The damage rate of wheat spikes treated at $-5^{\circ}C$ for 9 h was the highest, while the damage rates of wheat sprouts treated at 5h and 7h were not different from each other. It was found that the damage of wheat spikes exposed to low temperatures for a long time was large. It is necessary to investigate the aspects of spike damage by duration days of low temperature.

• Journal of Plant Biotechnology
• /
• v.47 no.3
• /
• pp.203-208
• /
• 2020

The involvement of antifreeze proteins (AFPs; type I and III) in the germination of low temperature-treated petunia seeds (cv. 'Mirage Rose') was investigated. The addition of AFPs (300 or 500 ㎍/l) in low-temperature treatment significantly promoted the germination of seeds compared with that in which AFPs were not added. Among all treatments, treatment with AFP I added at 300 ㎍/l showed the highest germination percentage and improved plant growth. The expression levels of antioxidant-related genes such as superoxide dismutase, peroxidase, and proline synthesis were associated with the germination of low temperature-treated seeds. Overall, this study demonstrated that AFP I may potentially function as a cold-protective agent for the germination of low temperature-treated seeds.

• Transactions on Electrical and Electronic Materials
• /
• v.1 no.2
• /
• pp.28-31
• /
• 2000

BaTiO$_3$cerameic thin films doped with Mn were manufactured by rf/dc magnetron sputter technique. We have investigated crystal structure, surface morphology and PRCR(positive-temperature coefficient of resistance) characteristics of the specimen depending on second heat-treatment temperature. Second heat treatment of the specimen were performed in the temperature range of 400 to 1350$\^{C}$ X-ray diffraction patterns of BaTiO$_3$ thin films show that the specimen heat treated below 600$\^{C}$ is an amorphous phase and the one heat treated above 1100$\^{C}$ forms a poly-crystallization . In this specimen heat-treated at 1300$\^{C}$, a lattice constant ratio(c/a) was 1.188. Scanning electron microscope(SEM) image of BaTiO$_3$ thin films of the specimen heat treated in between 900 and 1100$\^{C}$ shows a grain growth. At 1100$\^{C}$, the specimen stops grain-growing and becomes a poly-crystallization . A resistivity-temperature characteristics of the specimen depends on the doping concentrations of Mn. A resistivity ratio between the value at room temperature and the one above Curie temperature was 10$^4$ for pure BaTiO$_3$ thin films and 10$\^$5/ fo BaTiO$_3$ : additive 0.127mol% MnO