• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.580-586
• /
• 2005

In this study, experimental tests for driving noise of various optical disk drives (ODD) have been performed using 1/2' microphone noise measurement system. Several new and old ODD models by different manufacturers are practically considered and compared far realistic driving conditions. Sound insulation case with absorbing material fur the present experimental tests is designed and constructed using CATIA system. It is found that average data transfer rate, operating RPM, and sound noise level seems to be different for the same opposed speed ODD by different manufacturers. Moreover, driving sound noise level can be largely affected by both tray shape and driving speed even for the same apparent data transfer rate.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.974-977
• /
• 2005

Automatic lens assembly system is used for automatically assembling the lens module of phone camera. In this paper, we are trying to develop the cluster type automatic lens assembly with standard tray for applying for assembly field directly. This paper proposes the principle of cluster type lens assembly system and the related assembly production line concept for optimal automatic lens production line.

• 한국산학기술학회논문지
• /
• 제12권5호
• /
• pp.2445-2450
• /
• 2011

화학공정 모사 소프트웨어인 HYSYS를 사용하여 Reformate 분리 공정을 열복합 증류탑으로 설계하였다. 열복합 증류탑 설계 방법을 자세히 하였고, 모사 결과를 일반 증류탑과 비교한 결과 제시된 열복합 증류탑 설계 방법이 간단하고 효율적이라는 것을 알 수 있었다. 같은 tray 단수하에서 열복합 증류탑은 일반 증류탑 대비 약 12.2% 에너지가 절약됨을 알 수 있었다.

• Journal of Biosystems Engineering
• /
• 제22권3호
• /
• pp.317-324
• /
• 1997

This study was conducted to develope a machine vision system for a robotic transplanter for bedding plants. Specific objectives of this study were 1) to get coordinates of the healthy seedlings in high-density plug tray, and 2) to get the angle of the leaves of the healthy seedlings to avoid the damage to seedlings by gripper. Results of this study were summarized as follows. (1) The machine vision system of a robotic transplanter was developed. (2) Success rates of detecting empty cell and bad seedlings for 72-cell and 128-cell plug-trays were 98.8% and 94, 9% respectively. (3) Success rates of calculating the angle of leaves fer 72-cell and 128-cell plug-trays were 93.5% and 91.0% respectively.

• 전기학회논문지P
• /
• 제58권2호
• /
• pp.196-201
• /
• 2009

In this paper, We developed specifications light-way lighting appliance for efficient construction Wiring embody lighting appliance is convenient for divergence of circuit and arrangement construction of lamp. Also, it can be shortened construction period because series construction is available. Improved product is high work efficiency because the volume is small and the weight is light. Power line and line of communication are received each tray, so equipment is secure. We believe that the product is available for gallery, museum, and parking lot etc.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2009년도 추계학술발표논문집
• /
• pp.850-853
• /
• 2009

반도체 조립공정에서 사용되는 Pick and Placement장비는 반도체패키지를 컴퓨터 비젼을 이용하여 위치 정렬하고 Placement Tray에 적재하는 장비로서 고속,고정밀도가 요구된다. 다변량 통계적 분석방법인 주성분 분석법은 주어진 데이터에서 특징이 되는 일정한 패턴을 찾는 방법으로 영상의 차원감소를 위해 최근 많이 사용되어지고 있다. 본 논문에서는 반도체패키지의 기하학적 형태를 이용하여 위치정렬을 하도록 한 후 성능을 검증하도록 하였다. 패키지 원영상에서 밝기값의 차이에 따른 윤곽선을 인식한 후, 각 위치값들을 주성분 분석법을 이용해 직선을 추출한 방법으로 위치정렬한 결과 신뢰할만한 위치정렬 성능을 보였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1299_1300
• /
• 2009

We show results that examine about electrical properties of XLPE insulated 6.6kV cable termination by mechanical damage. The cable used to produce the cable termination is 6/10kV tray XLPE fire retardant electric cable (6/10kV TFR-CV $35SQMM{\times}1C$) which is domestically made. We apply force to XLPE insulator and made mechanical defect using knife. Defected samples go through the withstand voltage test according to the IEEE std. 48 test regulations and lighting impulse (hereunder, IMP) withstand voltage test regulations. Then the effects of the scars shown during the construction process on electric accidents at the end part are analyzed.

• 한국기계가공학회지
• /
• 제9권6호
• /
• pp.21-28
• /
• 2010

This study shows an optimization procedure for an automatic determination on the gate position to ensure the fill-uniformity within a part cavity by using the injection molding simulation. For an optimization, the maximum pressure-difference within a part cavity induced at the stage of filling is used to evaluate degree of fill-uniformity. In addition, a direct search scheme based on the reduction of design space is developed and applied in the optimization problem. This corresponding proposed methodology was applied in the optimization on the gate location for a CD-tray molding, as a result, showed the improvement of the fill-uniformity within the cavity.

• 대한의용생체공학회:의공학회지
• /
• 제14권4호
• /
• pp.371-378
• /
• 1993

A new recognition algorithm which decides thge opening & the closing states of subject's eye and isn't affected by the subject's background is proposed. And it is tested in circumstances in which subject's motions are not restricted using the developed system. AERS (Automatic Eye opening & closing Recognition System) . The significant characteristic of the AERS is that it dosen't need any extra hardware except a formal CCD carmera and an image grabber but it works so well and so fast. The AFRS wcould be particularly well suited to a tray of communications of patients in a hospital, who can not communicate othertvise.

• 대한방사선치료학회지
• /
• 제11권1호
• /
• pp.28-32
• /
• 1999

Verifying the treatment value(Monitor Unit) unnecessarily involves too many simple and repetitive calculation processes, that is, individual computation process using the data(PDD value, Scp Factor, SSD Factor, Tray Factor) on the data book. We intend to minimize the time required to check the Monitor Unit through computerized calculation. Using $^{\ast}(multiplication)$, /(division), +(sum), if function, among others, which are present in the Excell program, MS office program, the Monitor Unit was obtainable through A/P value, Scp Factor and PDD value, Wedge Factor. From the verification of the computations of Monitor Unit for 60 patients previously treated, we were able to obtain an error rate of ${\pm}0.028MU$. Computerized calculation of the Monitor Unit could save the burden of Technologist.