• Journal of Food Hygiene and Safety
• /
• v.17 no.3
• /
• pp.129-136
• /
• 2002

This study was conducted to Provide basic information Promoting egg qualify improvement and hygienic control by grasping of present market egg distribution system and hygienic quality. The eggs of 57 brands collected from the department food stores in Incheon Metropolitan City were examined. Eggs were kept in room temperature in all the market and 70.2% of the brands were marked the expiration date indicating that eggs would be available over 28 days after being laid. Fifty-four % of the market eggs was classified as a special or functional egg. Expiration date and date of laying were common labelling items in all brands. These items were labelled in trade mark sheet or eggs tray. Only 66.6% of the brands had the mark about net quantity of contents. The inspection about the exterior and contents of eggs has results as follows: eggshell contamination of feces and feather-9.5%, abnormal and broken eggshell -3.9%, blood and meat spots in contents -14.7% and watery whites -1.8%. Average of Haugh Unit(HU) was 56.1 and below HU 31 were 18 of 285 eggs(6.3%), in addition, more than one egg detected in 12 brands(21.1%) among 57 brands have inferior quality. Salmonella enteritidis from eggshell and antibodies directed from S. enteritidis in the yolks of eggs available in the market were not detected. Ranges of Total bacterial count (CFU/ml) on eggshell of eggs were < 10~8.2$\times$10$_3$, and isolation ratio of Escherichia coli were 4.7%. Tetracyclines were detected in 1.8% of the eggs(1 of57 brands) by CHARMII. As mentioned above, quality control and improving distribution system were required to facilitate egg consumption and improve public health by complementing labelling items and quality standards.

• The Korean Nurse
• /
• v.37 no.2
• /
• pp.44-52
• /
• 1998

The purpose of this study is to inquire the people's views on nursing for nurses, correct the image of nurse and take it as basis to be applied on nursing education examining the image of nursing on Television drama playing important role of mass media. 22 nurses of the characters in drama is applied to the analysis object of this study by selecting 6 dramas of Television ones the nurse play on the prime time from June 1 to August 31 in 1997. Contents analysis method was used in Data Analysis, 4 items was used after Coders previously modify and compensate it based on research documents of 1m Milim(1996) 2 Coders made the Coding the article on each person by them seeing the recorded film making the Coding Paper each items is written by the character. The average of reliability degree was 90% which measured the reliability degree by the mathod of Holsti. The statisic method of frequency, percentage was used SPSS Program in data processing The results were as follows. 1. Relative importance of 86.2% nurses in drama was depicted as extra characters 2. The affair attitude of nurses shown on drama was revealed as mechanical(84.7%), passive(45.5%), dependent(54.4%) unkind(68.2%). 3. The activity of nurses was classified with professional! simple affair. The professional affairs such as I.V., Blood Pressure Check, Rounding, Nursing Recording, Patient Education, Assist of Operation, Assistant meal of Patient, etc is mainly depicted and the screen of simple affair such as Receiving telephone, Carrying Tray or Dragging, Stretcher Car, Dressing Car and or Wheel Chair than professional affair. 4. The appearance feature of nurses was shown on thin physique(68.2%), common stature(68.2), dirty costume(45.4%), common appearance(81.9%), unnoble action(63.6%). The image of nurses is illuminated as the exterial scene of technical affair such as assisting the doctors and affair focused on accident and educational activity of nureses or extended role is nor depicted on Television drama. Therefore, the people regard the nurse as sexual object with good appearance than professional worker working professional nursing We want the following, epigraph based on above conclusion. 1. The continuous research is required on the image of nurse shown on various mass media. 2. The later research is required on appliction strategy of mass media for advancing the image of nurse. 3. The research to strengthen the objectivity by comparing analyzed data on drama & analyzing it is required 4. Through the deep study, the standard to show a concrete and professional work of nurses to scenario writers of TV drama is suggested by the association. 5. The monitoring about the mass media must be activated, not by some nurses, on a national scale and much study on the basis of this is needed.

• Current Research on Agriculture and Life Sciences
• /
• v.2
• /
• pp.29-33
• /
• 1984

From June 28th to July 17th in 1985, this study was performed to obtain the information of the fresh corn forage production through the spraying hydrophonics in summer. The experiments were conducted in vinyl house on Kyungpook University's Experimental Station. The results obtained were as follows: It was suggested that the treatment of soaking for 24 hrs and followed by the pretreatment for 48 hrs was better than other treatments. Seed cost for the production of 1 kg fresh forage was the most inexpensive at the seeding rate of 450 g per $30{\times}60cm$ tray than other seeding rates. Application of 1000 times diluted Hyponex solution (1000X Hyponex) or 300 times diluted Yogen solution (300X Yogen) one time per day resulted in the heavier fresh weight than the other treatments. Treatments of 300X Yogen and 500X Yogen gave the better fresh weight in one application per two days and per three days, respectively. But, this method was not useful in summer because the lowest seed cost for the production 1kg fresh forage was 73Won, and collection of the fresh forage from the mountain range was easy.

• Food Science and Preservation
• /
• v.15 no.5
• /
• pp.630-634
• /
• 2008

The effect of packaging methods on the quality characteristics of leaf lettuces was studied during storage at low temperature. Using five commercial packaging types: non-perforated PP (polypropylene) film bags, PP film roll, perforated PP film bags, PET (polyethyleneterephthalate) trays, and micro-perforated LDPE film bags, changes in color, respiration rate, and weight loss of leaf lettuces were investigated. Packaging in non-perforated PP film bags minimized color change and weight loss during storage. The leaf lettuces packaged in non-perforated PP film bags, among the five packaging choices, showed good external appearance and offered the greatest sale potential in the domestic market. However, there were no clear differences in the respiration rates of lettuces packed in various ways. The PET tray afforded very good protection of leaf lettuces from physical damage. The results indicate that the marketability of lettuces may be directly affected by the packaging modes employed, and that the optimal packaging may be non-perforated PP film bags; these keep lettuces fresh during low-temperature storage.

• Food Science and Preservation
• /
• v.19 no.6
• /
• pp.807-812
• /
• 2012

This study was investigated the changes in quality of heat treated fresh-cut lotus roots using various packaging materials. Lotus roots were purchased from Daegu, Korea. Lotus roots were washed, peeled and sliced with a sharp ceramic knife. The prepared peeled and sliced lotus roots were dipped for 45 sec in water at $55^{\circ}C$. After air-dried at room temperature, the slices were packaged with polyethylene films, polyethylene terephthalate tray+wrapping, vacuum packaging and then stored at $4^{\circ}C$. Changes in weight loss, color, firmness, microorganisms and sensory characteristics were measured. In general, the weight loss rate was increased slightly in vacuum packaged lotus roots. Application of heat treatment delayed browning of lotus roots, and especially vacuum packaged lotus roots were the most lowest ${\Delta}E$ value. However, L and ${\Delta}E$ value of PE film packaged lotus roots were increased highly during storage. The heat treated and vacuum packaging inhibited the growth of microorganisms effectively. The organoleptic quality of vacuum packaged lotus roots showed the best by sensory evaluation.

• Food Science and Preservation
• /
• v.17 no.5
• /
• pp.581-585
• /
• 2010

The effects of plastic container vent ratio on fruit quality during strawberry precooling and storage were analyzed. Plastic containers ($520mm{\times}355mm{\times}182mm$) were manufactured with bottom and side vents at areal ratios of 5%, 10%, 15% and 20%. Fruit was loaded at a volume ratio of 80% prior to pressure cooling and storage at $5^{\circ}C$. The internal fruit temperature was $18^{\circ}C$ and the times taken to attain $2^{\circ}C$ after precooling were 1 hour 9 minutes, 1 hour 13 minutes, 2 hours 2 minutes, and 2 hours 51 minutes at vent ratios of 20%, 15%, 10%, and 5%, respectively. To mimic the current distribution system, precooled strawberries were packaged in tray wrapping and stored at $5^{\circ}C$. Changes in weight, bruising, extent of decay, and firmness, were measured. Weight loss, bruising, and decay were highest at a vent ratio of 20%, lowest at a vent ratio of 15%, and moderate at vent ratios of 5% and 10%. No significant among-treatment difference in fruit firmness was evident.

• Korean Journal of Plant Resources
• /
• v.27 no.2
• /
• pp.174-182
• /
• 2014

This study was carried out to investigated the effects of soil type and light condition on seedling quality of rare and endemic plants Orostachys iwarenge and Orostachys iwarenge for. magnus. The best seedling quality of O. iwarenge and O. iwarenge for. magnus seedling were shown in Klasmann soil at non-shading or LED (Red+Blue) condition, 50% shading or LED (Red+Blue) condition, respectively. Survival of O. iwarenge seedling was not influenced by the period of experiment but survival of O. iwarenge for. magnus seedling in sandy soil conditions decreased significantly. Results of correlation analysis of seedling quality and survival rate, indicated that O. iwarenge showed a correlation of 0.8 or more at plant height, leaf length and fresh weight. O. iwarenge for. magnus showed a correlation of 0.8 or more at plant height, leaf width and leaf length. Especially, seedling survival of O. iwarenge and O. iwarenge for. magnus showed a correlation of 0.8 or more at first seedling survival and second seedling survival. It was important to manage the early seedling stages of O. iwarenge and O. iwarenge for. magnus. Therefore, seedlings with plant height (over 2.5~4 cm) and root length (over 3~5 cm) were grown vigorously at 35 days after the seedling was transplanted in mid-April in Klasmann soil of 72 plug cell tray at LED (Red+Blue) conditions.

• Korean Journal of Plant Resources
• /
• v.32 no.1
• /
• pp.38-44
• /
• 2019

This study was conducted to establish a domestic cultivation system of a newly introduced yam bean (Pachyrhizus erosus L.). Growth and yield were investigated in response to various cultural practices, such as seedling raising, planting distance, pinching, and flower pruning. Optimum conditions for raising of seedling were an average temperature of $22^{\circ}C$ for 30 days. Considering of the raising efficiency and the convenience of transplanting, 128 cells per tray was a suitable size. When pinching at a height of 120 cm from late July to early August, yield increased by 22% compared to no pinching. Flower pruning between late August and early September increased the number of tubers and tuber yield by 32% in comparison with no flower pruning. Yam bean seedlings planted at $50cm{\times}30cm$ spacing resulted in 30% yield increase as compared to wider spacing of $100cm{\times}30cm$. Our results thus suggested that the optimal combination of cultural practices ($50{\times}30cm$ planting distance, pinching at 120 cm height, and one time of flower pruning) increase profitability by 107%. All these results suggest high possibility of yam bean as a new income crop in Korea.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.27 no.2
• /
• pp.82-96
• /
• 2018

3D printing is a process of producing 3d object from a digital file in STL format by joining, bonding, sintering or polymerizing small volume elements by layer. The various type of 3d printing is classified according to the additive manufacturing strategies. Among the types of 3D printer, SLA(StereoLithography Apparatus) and DLP(Digital Light Processing) 3D printer which use polymerization by light source are widely used in dental office. In the previous study, a full-arch scale 3d printed model is less precise than a conventional stone model. However, in scale of quadrant arch, a 3d printed model is significantly precise than a five-axis milled model. Using $3^{rd}$ Party dental CAD program, full denture, provisional crowns and diagnostic wax-up model are fabricated by 3d printer in dental office. In Orthodontics, based on virtual setup model, indirect bracket bonding tray can be generated by 3d printer. And thermoforming clear aligner can be fabricated on the 3d printed model. 3D printed individual drilling guide enable the clinician to place the dental implant on the proper position. The development of layer additive technology enhance the quality of 3d printing object and shorten the operating time of 3D printing. In the near future, traditional dental laboratory process such as casting, denture curing will be replaced by digital 3D printing.

• Journal of agriculture & life science
• /
• v.51 no.1
• /
• pp.187-192
• /
• 2017

In various crops, seedlings are preferred to seeds for faster and more effective growth, so transplanters are used for them. This 2-row transplanter was developed to promote the mechanization of vegetable transplanting work which depends on human power. and it can automatically supply seedling tray and transport picked up seedling to the planting hopper. Also, we judged performance of transplanter with comparing seedling missing plant ration according to two types of pick-up method. Result of experiment, in finger-type picking up of 265 seedlings, missing plant ratio was 13.7% with 17 failures of pick-up and 15 collapse of bed soil. and In fork-type picking up of 200 seedlings, failure of pick-up was not appeared and missing plant ratio was low as 4% with 6 dropped during transfer. Therefore for 2-row automatic transplanter, fork-type pick-up device was found to be compatible.