• Journal of Life Science
• /
• v.7 no.4
• /
• pp.316-321
• /
• 1997

The effects of the silver ion-exchanged water treatment agent (Ag-Os) upon E. coli RB 797 and Bacillus sp. have been discussed in this study. Silver ion causes a number of toxic effects with no known biological function. Silver ion-exchanged water treatment agent (Ag-Os) using oyster shell here showed antimicrobial activities. the soluble form of silver ion in water is more toxic to the growth of Bacillus sp. than that of E. Coli RB 797. The minium amount of Ag-Os needed for growth inhibition is 0.2 mg/ml for E. Coli RB 797 and 0.02 mg/ml for Bacillus sp., which is consistant with the data of the survival cell fraction. Binding studies suggested that binding of silver to the cell surface was a rapid, metabolic-independent process and different from active transport. Bacillus sp. showed more binding than E. Coli RB 797. Reducing substances of the cell cultures in the presence of Ag-Os was detected using Methylen blue as an indicator. From these results, we suggest that Ag-Os is effective as an antimicrobial agent on E. Coli RB 797 and Bacillus sp. and silver binds to the cells through rapid, metabolic-independent process and might complex to sulfur group in the cells for its toxicity.

• Journal of Distribution Science
• /
• v.13 no.1
• /
• pp.27-33
• /
• 2015

Purpose - The ICT market in the EU is lagging behind that of the US; however, algorithm and software development within the EU have grown steadily, and they involve focusing on the creative cultural convergence conceptualized as part of Horizon 2020 and connecting neighboring markets in the EE and the Mediterranean region. It is essential to study the requirements to market the EU's creative ICT development in emerging industrial countries after examining its applicability in these countries. Research design, data, and methodology - This study deals with data pertaining to the EU's creative industry and competitive edge. The global cultural expansion of the EU facilitates a new concept involving not only low-cost IT products to enhance local cultural artifacts through R&D and the construction of efficient infrastructure services, but also information exchange with a realistic commercialization of the technology that can be applied for creative cultural localization. In the European industry, research on algorithms has been applied for the benefit of consumers. We investigated how the process is conducted in the EU. Results - Europe needs to adjust its economic structure to the local culture as part of IT distribution convergence. The convergence has been converted into a production algorithm with IT in the form of low-cost production. This is because there is an attempt to improve the quality of transport infrastructure, workforce availability, and the distribution of the distance to the local industries and consumers, using IT algorithms. Integrated into the manufacturing industry, based on the ICT infrastructure and solutions, smart localized regional clusters are formed with the help of grafting. Europe has own strategy to increase the number of hub-and-spoke cities. Europe is now becoming integrated, with an EPC system for regional cooperation rather than national competition in ICT technology. Europe has also been recognized in this study as changing the step-by-step paradigm for global competitiveness through new creative culture industries. Conclusions - As a result, there are several ways of converging with others through EU R&D intensity; therefore, the EU can be seen as successfully increasing marginal value, which is useful in developing a special industrial cluster or local cultural cities that create converged development by connecting people and objects with IT. In fact, when compared to the US, Europe has a strong culture and the car industries have a tendency to overshadow the IT industries with integration of services in IT distribution. Considering the rapid environmental changes, the convergence of IT services is likely to take place in Europe, similar to the pharmaceutical industry and the automotive industry. This requires a focus on human resources and automated systems management. The trend is to move away from low-wage industries, switched to key personnel centers of the local university-industry. EU emphasizes the creation of IT market demand in Europe involving local cultural convergence for marketing as the second step to strengthen the economic hub-and-spoke areas.

• Korea Real Estate Review
• /
• v.27 no.4
• /
• pp.35-50
• /
• 2017

The Korean society is currently at the level of discussing the living environment and the housing welfare as factors for improving the quality of life, in addition to most individuals or households residing in a living environment and housing welfare, according to industrialization and urbanization. However, even though the overall housing welfare of Korea has improved, the number of households with disabilities belonging to the social special class is not as high as that of the non-disabled households. It is a reality that cannot be done. Therefore, this study aims to identify the present condition and demand characteristics of the housing for disabled people whose social importance is currently emphasized among the social special people who can be called the social special class, as well as present the housing welfare policy to them and explain the purpose of the improvement plan. In this study, 4,277 out of 8,004 households with disabilities surveyed by the Ministry of Land, Infrastructure, and Transport in 2015 were analyzed. The result of the analysis showed that the economic characteristics (permanent income indicating the income and the user cost indicating the expenditure) of the housing demand of a household with a handicapped individual are important. This analysis will provide more effective policy formulation and policy direction for the families of the disabled.

• Journal of Korea Port Economic Association
• /
• v.34 no.3
• /
• pp.93-112
• /
• 2018

The purpose of this study is to analyze the flow of e-commerce freight transported by maritime transportation for China and to identify the characteristics of cargo by region/item for finding the ways to promote e-commerce export to China. Thus, this study analyzed the e-commerce export and import data on cargo moved via maritime transportation between Korea and China from 2015 to 1Q18, using Origin-Destination(OD) analysis and visualization techniques. The results indicated that the largest number of Chinese e-commerce cargoes were imported at Incheon Port, which has a clearance facility for e-commerce cargo. In the case of Pyeongtaek Port, e-commerce cargo imported from China has transported to Incheon Customs again, causing the inefficiency through the customs clearance process. Unlike the case of e-commerce imports where the final destination is distributed nationwide, e-commerce products exported to China through maritime transportation were found to be mainly confined to Seoul and Gyeonggi provinces, where freight forwarding companies and forwarders are concentrated. In addition, unlike e-commerce import cargoes, e-commerce items exported through maritime transportation were mainly confined to clothing and cosmetics, and export volume was also less than imports. This study provides some possible strategies to increase the volume of freight and to attract export products as follows: i) to diversify products exported to China through e-commerce transshipment, ii) to diversify export items by building the cold chain in e-commerce transport with China.

• Solar Energy
• /
• v.14 no.2
• /
• pp.75-90
• /
• 1994

Thermal energy transport in a two-dimensional horizontal and vertical channel with an isothermal rectangular beam attached to one adiabatic wall is investigated from the numerical solution of Navier-Stokes and energy equations. The solutions have been obtained for dimensionless aspect equations. The solutions have been obtained for dimensionless aspect ratios of beam, H/B=$0.25{sim}4$, Reynolds numbers, Re=$50{\sim}500$ and Grashof numbers, Gr=$0{\sim}5{\times}10^4$. The mean Nusselt number, $\overline{Nu}$ for horizontal and vertical channels shows same value at Gr=0 and increases as Gr increases and decreases as H/B increases at Re=100. $\overline{Nu}$ of vertical channel shows higher in $0.25{\leq}H/B<1.1$ and lower in $1.1{\leq}H/B{\leq}4.0$ than that of horizontal channel at $Gr=10^4$, Re=100. $\overline{Nu}$ of vertical channel shows higher in $0.25{\leq}H/B<1.1$ and lower in $1.1{\leq}H/B=1.0$ than that of horizontal channel at Re=100, $0<Gr{\leq}5{\times}10^4$. A comparison between the experimental and numerical results shows good agreement.

• Journal of the Korean Institute of Gas
• /
• v.25 no.3
• /
• pp.27-38
• /
• 2021

We devised the system to automatically shutdown the boiler and to fundamentally block the harmful gases, including carbon monoxide, into the indoor when the exhaust system swerves: (1) The discharge pressure of the exhaust gas decreases when the exhaust pipe is disconnected. The monitoring system of the exhaust pipe is implemented by measuring the output voltage of APS(Air Pressure Sensor) installed to control the amount of combustion air. (2) The operating software was modified so that when the system recognizes the fault condition of a flue pipe, the boiler control unit displays the fault status on the indoor regulator while shutting down the boiler. In accordance with the ventilation facility standards in the "Rules for Building Equipment Standards" by the Ministry of Land, Infrastructure and Transport, experiments were conducted to ventilate indoor air. When carbon monoxide leaked in worst-case scenario, it was possible to prevent poisoning accidents. However, since 2013, the number of indoor air exchange times has been mitigated from 0.7 to 0.5 times per hour. We observed the concentration exceeding TWA 30 ppm occasionally and thus recommend to reinforce this criterion. In conclusion, if the flue pipe fault detection and the indoor air ventilation system are introduced, carbon monoxide poisoning accidents are expected to decrease significantly. Also when the manufacturing and inspection steps, the correct installation and repair are supplemented with the user's attention in missing flue, it will be served to prevent human casualties from carbon monoxide poisoning.

• Korean Journal of Construction Engineering and Management
• /
• v.20 no.1
• /
• pp.52-61
• /
• 2019

On 30 June, 2017, the Ministry of Land, Infrastructure, and Transport announced the minimum size of parking section will be expanded in parking lots. The expansion of parking section could lead to increase in apartment prices because of increase in total area of the parking lots. It is necessary to adjust the column spacing and number in the parking lots and to apply the 8-Bay long-span parking module with good parking efficiency. According to the study, the construction cost of the 6-Bay module and 8-Bay module was almost the same. But The 8-Bay module was more economical than the 6-Bay module because of the reduction in total area of 8-Bay multi-moduel. The Result of construction cost of 8-Bay modules, Removal Deck-plate RC system was most economical. While the construction cost of PC system was higher due to increase in volume of the member, it would ensure sufficient economy by reducing the girder height to apply a pre-stress method. Also, the construction cost of hollow slab system was the highest. But it could be used as the underground parking lots for apartment, because it had the lowest cost per square meter. This Study has a academic significance by proving the applicability of the 8-Bay Module to underground parking lot of apartment. And it is expected that this study will be used as basic data to derive optimal construction method that applies 8-Bay Module.

• Journal of the Society of Naval Architects of Korea
• /
• v.58 no.4
• /
• pp.262-270
• /
• 2021

Consumption of Liquefied Natural Gas (LNG) has increased due to environmental pollution; therefore, the need for LNG carriers can efficiently transport large quantities of LNG, is increased. In various types of LNG Cargo Containment System (CCS), Membrane-type MARK-III composed of composite materials is generally employed in the construction of an LNG carrier. Among composite materials in a Mark-III system, glass-fiber composites act as a secondary barrier to prevent the inner hull structure from leakage of LNG when the primary barrier is damaged. Nevertheless, several cases of damage to the secondary barriers have been reported and if damage occurs, LNG can flow into the inner hull structure, causing a brittle fracture. To prevent those problems, this study conducted the applicability assessment of composite material manufactured by bonding glass-fiber and aluminum with epoxy resin and increasing layer from three-ply (triplex) to five-ply (pentaplex). Tensile tests were performed in five temperature points (25, -20, -70, -120, and -170℃) considering temperature gradient in CCS. Scanning Electron Microscopy (SEM) and Coefficient of Thermal Expansion (CTE) analyses were carried out to evaluate the microstructure and thermos-mechanical properties of the pentaplex. The results showed epoxy resin and increasing layer number contributed to improving the mechanical properties over the whole temperature range.

• Journal of the Korean Regional Science Association
• /
• v.36 no.4
• /
• pp.3-23
• /
• 2020

This study aims to conceptualize the settlement inclusivity for overcoming social exclusion and the decline in quality of life of older people and to examine its effects on their mental health. The concept of the settlement inclusivity for older people focuses on the immediate environment around the place where they live. We proposed two domains for the conceptual framework; social domain that provides opportunities for community cohesion; spatial domain that provides security of residential area and access to basic services within walking distance. The social domain was represented by participation and interdependence, while the spatial domain by security and accessibility in the settlement inclusivity. Zero-inflated negative binomial regression model was constructed with 2017 National Survey of Older Koreans data to analyze the factors influencing depressive symptoms of older adults. The empirical results demonstrate that increased level of neighborhood network and social participation is associated with a decrease in the number of depressive symptoms. In addition, higher satisfaction in neighborhood environment and good accessibility to public transport/stores are associated with fewer depressive symptoms. Finally, housing condition and home ownership have a moderating effect on the relationship between social network/participation and depressive symptoms level, whereas they have no direct effects on depressive symptoms. This study demonstrates multi-dimensionally and mutually significant associations between settlement inclusivity and depressive symptoms for older people providing implications for urban planning and policies to improve mental well-being of older population.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.3
• /
• pp.305-316
• /
• 2021

Construction accidents occur due to a number of reasons-worker carelessness, non-adoption of safety equipment, and failure to comply with safety rules are some examples. Because much construction work is done outdoors, weather conditions can also be a factor in accidents. Past construction accident data are useful for accident prevention, but since construction accident data are often in a text format consisting of natural language, extracting construction hazards from construction accident data can take a lot of time and that entails extra cost. Therefore, in this study, we extracted construction hazards from 2,026 domestic construction accident reports using text mining and performed a seasonal analysis of construction hazards through frequency analysis and centrality analysis. Of the 254 construction hazards defined by Korea's Ministry of Land, Infrastructure, and Transport, we extracted 51 risk factors from the construction accident data. The results showed that a significant hazard was "Formwork" in spring and autumn, "Scaffold" in summer, and "Crane" in winter. The proposed method would enable construction safety managers to prepare better safety measures against outdoor construction accidents according to weather, season, and climate.