• Proceedings of the Korea Information Processing Society Conference
• /
• 2000.10a
• /
• pp.465-468
• /
• 2000

본 논문에서는 인식코드를 전송할 수 있는 modulator 뿐만 아니라 Reader system으로부터 코드 전송제어 명령어를 수신할 수 있고 향후 EEPROM과 더불어 인식코드를 수정할 수 있는 RFID (Radio Frequency IDentification) Transponder 칩 설계에 관한 내용을 다룬다. RFID칩은 배터리를 사용하지 않고 명령어와 함께 형성되는 Field로부터 전원을 생성하고 동시에 코드를 제공하는 Full-Duplex 구조로 설계하였다. Transponder IC는 power-generation 회로, clock generation 회로, digital block, modulator, overvoltage protection 회로로 구성된다. 설계된 칩은 저전력 회로를 적용하여 원거리 transponder칩을 구현할 수 있도록 하였다. 설계된 회로는 $0.6{\mu}m$ 현대 CMOS 공정으로 레이아웃 하였으며 제작중에 있다.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2572-2573
• /
• 2002

RF용 칩 설계에 있어서, Transponder에서 사용되는 칩 전원은 Tranceiver로부터 방사되는 RF Power를 고효율 쇼트키 다이오드을 통하여 정류하여 칩 내부에 캐패시터에 저장하여 내부회로의 동작시 충분한 전류를 제공하게된다. 이 분야의 연구는 칩 정류 효율 향상이라는 목표로 고효율 다이오드개발 및 임피던스 매칭방법과 고효율의 안테나 개발과 더불어 활발한 연구가 계속되어져 왔다. 본 논문에서는 Transponder용 전압을 제공해주는 쇼트키다이오드 더블러(Doubler)의 내부노드에 모듈레이션(Modulation) 트랜지스터 및 Transponder로서의 입력버퍼를 설계함에 있어서, 입력버퍼의 입력으로서 안테나로부터 1차 정류된 전압을 사용할 수 있는 방안을 제시한다. 또한 이를 적용하여 개발된 RF ID(Identification Device)칩의 주파수에 따른 특성 및 결과를 고찰토록 한다.

• Proceedings of the KIEE Conference
• /
• 1998.07b
• /
• pp.669-671
• /
• 1998

Engine immobilizer is the automobile security system which disables the engine if the secrete code in the transponder embedded in the key knob is not in agreement with the code in ECU of the car. There are many types of immobilizer systems, however, the encryption transponder type system is the most secure system due to the code verification method using an encryption method. As an example of the industry-university cooperation, the software development in the system is introduced in this paper.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.4
• /
• pp.84-91
• /
• 1996

Input filter for satellite communication transponder is the interface between the antenna and the receiver. It is used to provide the selection of the uplink signals with minimum insertion loss and to prevent downlink signals form reaching the LNA. This paper is intended to provide a description of the input filter for KOREASAT communication transponder. Included are description for the electrical and mechanical design and the requirments of environmental test. In expecting the electrical performine the optimum electrical configuration ot meet all requirements are performed. Mechanical requirements are charactersed by several constraints for weight, size of the filter and its type of input output interface. The standardized environmental tests are performed to confirm satisfactory performance of the filter with respect to the requirements of vibration and thermal vacuum shocks.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.4
• /
• pp.1-10
• /
• 1993

This paper presents the designing/manufacturing scheme of the diplexer for satellite transponder which is composed of 2-channel bandpass filters, coupled with E-plane T-junction, having symmetrical waveguide E-plane step discontinuity structures. The 2-channel bandpass filters of the diplexer are designed by the scheme of connecting ${\lambda}_{g}$/2 shunt stub to the waveguide E-plane, playing the role of heat sinks without attaching a special heat sinks and to give the profitable productivity and allow the low-cost manufacturing at mass production, tuning screws are eliminated which have been used to compensate the operating characteristics of manufactured filters. The 2 channel bandpass filters of manufactured 14/12 GHz diplexer for domestic Ku-band satellite transponder have the return loss of 25 dB, insertion loss of 0.3 dB in passband, and below-50 dB of stopband characteristics (T$_{x}$ : f$_{o}{\pm}$250 MHz, R$_{x}$ : f$_{o}{\pm}$220 MHz) at room temperature.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.484-486
• /
• 2018

MF-CW(Multi-Frequency Continuous Wave)operated on Electro-Optical Tracking System to measure slant range of space launch vehicle and aircraft at Naro Space Center. In this paper, we compared and analyzed the difference exactly measured slant range using the laser lightwave range measuring equipment with measured on the transponder and described the accuracy of slant range.

• Transactions on Electrical and Electronic Materials
• /
• v.7 no.3
• /
• pp.103-107
• /
• 2006

In this paper, a CMOS complementary bridge rectifier for driving RFID transponder chips is presented. The proposed RFID CMOS complementary bridge rectifier is designed with two NMOSs at the input, which are configured by cross-connected gate structures, and two PMOSs and two NMOSs at the output, which are configured by diode-connected MOS structures. Output characteristics of the proposed rectifier are analyzed with the high frequency small-signal equivalent circuit and verified with SPICE for RFID operating frequencies of 13.56 MHz HF for ISO 18000-3, 915MHz UHF for ISO 18000-6, and 2.45 GHz microwave for ISO 18000-4. Simulation results show well-rectified and high enough DC output voltages for driving the low power microchip in the RFID transponder for the frequency range from HF to microwave. DC output voltages are dropped by only around 0.7 V from the input peak-to-peak voltages.

• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.1001-1004
• /
• 2000

RFID system is applied to identify, locate and track people, cars, animals. In RFID system, the passive transponder without battery has some benefits than active transponder, such as no restriction in battery exchange and in battery’s life. But it needs auxiliary RF-DC conversion circuit. RF-DC conversion circuit originated from Wireless Power Transmission (WPT). In this paper, RF-DC conversion circuit consists of a microstrip patch antenna and impedance matching circuit, Cock-croft Walton circuit. And RF-DC conversion circuits have two kinds of T-type and Cross-type impedance matching circuits.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3259-3261
• /
• 1999

A passive RF transponder incorporating a non volatile memory element is powered by inductive coupling to a proximately located RF reader and communicates with reader. In this study, we designed and analyzed the passive RF transponder which is operated at 134kHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.3
• /
• pp.327-335
• /
• 2011

A study on the RCS of a self-manufactured active transponder, which has a manually adjustable RCS, for SAR(Synthetic Aperture Radar) external calibration and image analysis at X-band is presented in this paper. The RCS of the active transponder was comparably analyzed using the lab-test and the COSMO-SkyMed SAR system, and also precisely analyzed the difference between the adjusted and estimated RCSs. A maximum RCS of the designed and manufactured active transponder is 60 dBsm. The active transponders with 60 dBsm and the adjusted RCS of 40 dBsm were measured using the single target calibration technique(STCT) and 2D target scanning technique(2DTST). And the extracted RCS using power-spill integration technique in a SAR image was compared with the measured RCS of active transponder. The comparison results show that the measured and extracted RCSs are 59.7 dBsm, 40.2 dBsm and 57.3 dBsm, 39.2 dBsm, respectively.