• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.1205-1211
• /
• 2004

We propose a train position estimation method for automatic train control system. The accurate train position should be continuously feedback to control system for safe and efficient operation of trains in railway. In this paper, we propose the sensor fusion method integrating the tachometer, the transponder, and the doppler sensor for estimation of train position. The external sensors(transponder, doppler sensor) are used to compensate for the error of internal sensor(tachometer). The Kalman filter is also applied to reduce the measurement error of the sensors. Simulation results are then presented to verify the usefulness of the proposed method.

• ETRI Journal
• /
• 제24권2호
• /
• pp.153-160
• /
• 2002

High Altitude Platforms-craft maintaining stations in the stratosphere at altitudes of around 20 km-have been proposed as a means of supporting wireless telecommunications. They could exploit the best aspects of both terrestrial and satellite systems and support efficient frequency re-use plans. For solar powered platforms the power available for the downlink amplifiers may be minimal, particularly at night and/or higher latitudes. This paper discusses a novel type of link based on a modulated retro-directive transponder carried by the HAP. Relying chiefly on the ground station infrastructure, this would substantially reduce power consumption on the platform. We investigate the efficiency of the transponder aperture as a function of its area by developing general models for losses in the transmission lines which interconnect antenna pairs in the retro-directive array.

• 한국전자파학회논문지
• /
• 제12권4호
• /
• pp.622-629
• /
• 2001

본 논문에서는 Ku 대역 위성중계기에 사용되는 저위상잡음 특성을 갖는 Engineering Model 전압제어 발진기를 비선형 설계방법으로 설계하였다. 제작한 발진기의 주파수는 1~5 V의 제어전압으로 1.745~1.577MHz의 발진범위를 갖는다. 공급전력은 5V, 6.9mA를 요구한다. 제작한 발진기의 위상잡음은 -114 dBc/Hz ＠10kHz offset, -131 dBc/hz ＠100kHz offsetf을 갖고 출력전력으로 5 dBm을 얻었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 통신소사이어티 추계학술대회논문집
• /
• pp.68-71
• /
• 2003

An output multiplexer of manifold type is widely employed in a recent satellite transponder due to its small size and mass. For correct operation, channel fillers in manifold multiplexer must be singly terminated. In this paper, a simple synthesis method fur a single terminated filter is described. From the given method, a 4-pole singly terminated elliptic function filter for Ka band satellite transponder is designed. The filter is shown to be suitable for satellite application and its measured results agrees well with computed ones.

• 한국군사과학기술학회지
• /
• 제6권3호
• /
• pp.15-21
• /
• 2003

This paper contains a precise calibration technique for the position of seabed acoustic target and theoretical error analysis of calibration results. The target is deployed on seabed as a standalone transponder. The purpose of target is performing accuracy test for active sonar as well as position calibration itself. For the position calibration, relative range between target and test vessel should be measured using target's transponder function. The relative range data combined with vessel position can be converted into a estimated position of target by the application of nonlinear LSE method. The error analysis of position calibration was divided into two stages. One is for relative range estimator and the other for target position estimator. Numerical simulations for position calibration showed good matching between results and developed CRLB.

• 산업공학
• /
• 제9권3호
• /
• pp.22-33
• /
• 1996

The KOREASAT satellite, the first Korean commercial communication and broadcasting satellite, has been launched in August 1995, and has started to provide the communication and preliminary broadcasting services, respectively, in March and July 1996. In this paper the network configurations and characteristics of the services which the KOREASAT satellite provides are described. The services, which are provided by the KOREASAT satellite with its twelve communication and four broadcasting transponders, are the direct broadcasting service, the video relay service including the TVRO, SNG and TV/CATV program distribution, the company-wide communication service including VSAT and TSAT, and the other services with the digital line, trunk relay, telephone line, mobile data, music broadcasting services, etc. A communication transponder has the 36MHz bandwidth and 14W output power, and a broadcasting transponder has the 27MHz bandwidth and 12OW output power.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(1)
• /
• pp.235-238
• /
• 2002

In this paper we describe the design and implementation of Electrical Ground Support Equipment(EGSE) for the CBS transponder testing. The main task of EGSE is to check out satellite systems, at system or subsystem level, during integration and validation phases of their life-cycle. Through a combination of hardware and software elements, EGSE supports manual, semi-automatic and fully automated testing. Automation is achieved by offering users simple, yet powerful means to write their own test application programs (test sequences) in high-level, test-oriented language and to run them in a strict real-time environment. The core of this environment is a user-configurable real-time database, containing all the information needed to calibrate acquired data, check them against predefined thresholds, automatically react to out-of-range conditions, display data using animated graphics or synoptic windows, and so on.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(I)
• /
• pp.471-477
• /
• 2002

In this paper, it is proposed instruction code satisfied algorithm that is able to prevent data collision when transponder access in the area of recognition system that is operated to single channel. Differ from absolute collision is used to in the time domain procedure, instruction code satisfied algorithm, transmits data which don't generate collision and must satisfy instruction code. So, to prevent data collision, transponder is of great if it read the entire instruction code. Consequently, it is applied to algorithm that made the system of wireless recognition13.56 Mhz. As a result, for the time of one bit data transmission had 14${\mu}$s difference, it is proved the prevention of data loss in experiment.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 2004년도 하계종합학술발표회논문초록집
• /
• pp.465-465
• /
• 2004

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.393-394
• /
• 2007