• Preventive Nutrition and Food Science
• /
• v.14 no.4
• /
• pp.349-353
• /
• 2009

The effects of packaging materials on preserving the functional component of pine bud beverage stored under UV (ultraviolet) light exposure conditions were studied. The order of UV light blocking properties of the selected packages was: opaque can> opaque PET (polyethylene terepthalate) with green lamination=transparent PET with 10% PEN (polyethylene naphthalate) blending> transparent PET, and did not depend on film thickness in specified range. At 20${^{\circ}C}$, the order of preserving degree of original color and endobornyl acetate, which is quality index of pine bud beverage, was the same as above. Exposure to UV light can cause of deterioration of functional food components, but green color lamination and blending of PEN materials with transparent PET help to preserve the UV sensitive pine bud beverage components. However, the treated PET bottles have poorer preservation capabilities than the opaque cans. Transparent PET with PEN blending, in particular, will be very useful packaging material for colorful functional beverage preservation by helping to protect the ingredients while attracting consumer attention.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.85-85
• /
• 2012

For effective light harvesting, a design weighting should be implemented in a front geometry, in which the incident light transmits from a surface into a light-active layer. We designed a three-dimensionally patterned transparent conductor layer for effective light management. A transparent conductive oxide (TCO) film was formed as three-dimensional structures. This efficiently drives the incident light at the front surface into a Si absorber to yield a reduction in reflection and an enhancement of current. This indicates that an optimum architecture for a front TCO surface will provide an effective way for light management in solar cells.

• Korean Institute of Interior Design Journal
• /
• v.13 no.2
• /
• pp.46-55
• /
• 2004

While transparency in general refers to the structure that is optically luminant or pleasant in its lightness, it is often synonymous with the concept of "modernistic." The advancement in construction and design technologies and the development of new materials with versatility adds even further diversity to transparency in architectural expression. The purpose of this study is to analyze various conceptions about transparency effects by comparing diverse expressions of visual lightness effects in space design. For this, I categorize and exemplify visual lightness effects of space applied to transparent materials. I argue that by utilizing transparent materials, the perception of space as well as boundaries between exterior and interior can be profoundly transformed. Space that overlaps through transparent boundaries creates atmosphere which deepens the architectural space environments.ironments.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.1
• /
• pp.7-14
• /
• 2015

Recently, advances in nano-material researches have opened the door for various transparent conductive materials, which include carbon nanotube, graphene, Ag and Cu nanowire, and printable metal grids. Among them, Ag nanowires are particularly interesting to synthesize because bulk Ag exhibits the highest electrical conductivity among all metals. Here we reviewed recently-published research works introducing various devices from organic light emitting diode to tactile sensing devices, all of which are employing AgNW for a conducting material. They proposed methods to enhance the stretchability and reversibility of the transparent electrodes, and apply them to make various flexible and stretchable electronics. It is expected that Ag nanowires are applicable to a wide range of high-performance, low-cost, stretchable electronic devices.

• Transactions on Electrical and Electronic Materials
• /
• v.15 no.1
• /
• pp.45-48
• /
• 2014

We have investigated the effects of an Ag capping layer on the emission characteristics of transparent organic light-emitting devices with Ca/Ag double-layer cathodes. The thickness of the Ag layer was varied from 10 to 30 nm, whereas the Ca was fixed to be a 10 nm in the Ca/Ag structure. The luminance and current efficiency on the cathode and anode sides are significantly dependent on the Ag thickness. For example, the current efficiency on the anode side increases from 8.4 to 11.7 cd/A, whereas, on the cathode side, it decreases from 3.2 to 0.2 cd/A as the Ag thickness increases from 10 to 30 nm. These changes in emission characteristics were investigated by measuring electroluminescence, transmission, and reflection spectra.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.457-458
• /
• 2006

Transparent metal cathodes using Ca/Ag, Ba/Ag double layers have been fabricated to investigate its optical transmission. The transmission spectra show that Ca/Ag and Ba/Ag double layers result in higher transmittance compared to Ag single layer. The Ba/Ag double layer shows over 80% transmittance at 400 nm and 70% at 700 nm. The electroluminescence efficiency of fluorescent TEOLED using Ba/Ag transparent metal cathode was 10 ~ 15 cd/A.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.535-538
• /
• 2004

Zinc Oxide (ZnO) films have attracted considerable attention for transparent conducting films, because of their high conductivity, good optical transmittance from UV to near IR as well as a low-cost fabrication. To increase the conductivity of ZnO, doping of group III elements (Al, Ga, In and B) has been carried out. Transparent conducting films have been applied for optoelectric devices, the development of the transparent conducting thin films on flexible light-weight substrates are required. In this research, the transparent conducting ZnO thin films doped with Aluminum (Al) on polymer substrates were deposited by the RF magnetron suputtering method, and the structural, optical and electrical properties were investigated.

• Laser Solutions
• /
• v.15 no.1
• /
• pp.15-19
• /
• 2012

The fabrication of internal diffraction gratings with photoinduced refractive index modification in transparent materials was demonstrated using low-density plasma formation excited by a femtosecond (130 fs) Ti: sapphire laser (${\lambda}_p$=800 nm). The refractive index modifications with diameters ranging from $1{\mu}m$ to $3{\mu}m$ were photoinduced after plasma formation occurred upon irradiation with peak intensities of more than $2.0{\times}10^{13}W/cm^2$. The graded refractive index profile was fabricated to be a symmetric around from the center of the point at which low-density plasma occurred.

• Journal of Sericultural and Entomological Science
• /
• v.51 no.2
• /
• pp.197-200
• /
• 2013

Silk fibroin is a natural biomaterial that has the biocompatibility and other many advantages. But as a silk fibroin membrane thickness increases, the transparency becomes more opaque. Because the transparency of membranes tissue such as the cornea and dura mater are necessary, transparent membrane is required to replace these transparent membranes. In this study, we fabricated blending silk fibroin membranes that made by mixing the various inorganic salts or polymer in an aqueous solution of silk fibroin. The transparency of the membranes were analyzed. the transparency of these membranes is very different, depending on the mixed materials. Inorganic salts mixed silk membrane was more transparent than the polymer mixed one. Especially, the silk fibroin membrane with calcium chloride was very transparent. We showed the possibility of blending silk fibroin membrane, which can be used in perfect transparent membrane such as the cornea. In the future, we expect that the transparent blending silk fibroin membrane can be used in various medical applications.

• Korean Journal of Plant Resources
• /
• v.7 no.2
• /
• pp.183-186
• /
• 1994

This study was conducted to investigate desirable storage method to major chinese herbal medicine materials, Moutan Radicis Cortex in different packing materials and sealing degree. The loss in weight of Moutan Radicis Cortex as influenced by packing materials was the lowest at complete sealing treatment with transparent or black polyethylene film. The rot ratio of Moutan Radicis Cortex during the storage period was not difference between packing materials, transparent and black polyethylene film, but rot ratio of complete sealing condition was lower than punch ($\phi$J5mm) on polyethylene film.