• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1678-1681
• /
• 2004

The light-transmission technique has been applied to a slit rheometer for measuring red blood cell aggregation as well as blood viscosity over a range of shear rates. For measurement of blood viscosity and aggregation, instantaneous pressure and transmit-light intensity are measured with time. Using a precision pressure measurement, one can determine the shear stress and shear rate. In addition, a transmitted light through a blood sample indicates degree of RBC aggregation. With abruptly flowing with high shear rate, RBCs rapidly disaggregate and the intensity of the transmitted light becomes low. When continuously flowing with decreasing shear rate, RBCs tend to re-aggregate and the corresponding transmit-intensity gradually increases with time. The light intensity as a degree of RBC aggregation is plotted against shear rate and compared with blood viscosity. The advantages of this design are dual measurement at a time, simplicity, i.e., ease of operation and no moving parts, low cost, short operating time, and the disposable kit which is contacted with blood sample.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권1호
• /
• pp.20-23
• /
• 2004

In this paper, the emission properties of electrodeless fluorescent lamp were discussed using the inductively coupled plasma. To transmit the electromagnetic energy into the chamber, a RF power of 13.56 [MHz] was applied to the antenna and considering the Ar gas pressure and the RF electric power change, the emission spectrum, Ar I line, luminance were investigated. At this time, the input parameter for ICP RF plasma, Ar gas pressure and RF power were applied in the range of 10∼60 [mTorr], 10∼300 [W], respectively. From emission intensity and lumnance intensity results, the mode transition from E-mode to H-mode was observed. This implies that this method can be used to find an optimal RF power for efficient light illumination in an electrodeless fluorescent lamp.

• 미생물학회지
• /
• 제20권1호
• /
• pp.21-26
• /
• 1982

The disinfection effects of sunlight and predacious microorganisms on enteria of Escherichia coli and Proteus vulgaris were examined in sewage water at 22 to $26^{\circ}C$. The test prganisms were disinfected by 4 to 5 logs during 6-hour a day exposure to sunlight for seven days. The effect was proportional to the light intensity and was proved to be dur to the action of the visible light of short wavelength which can transmit the soft glass of a flask glass. The predacious microorganisms decreased trhe test organisms by about 3 to 4 logs during 7 days. The complex actions of sunlight and predacious microorganisms were variable depending upon the test organisms, but the total effects of those enviromental factors were yet completely understood.

• 한국환경과학회지
• /
• 제28권5호
• /
• pp.521-526
• /
• 2019

In this study, a solar light collector that collects and transmits solar light required for crop production in a closed plant production system was developed. The solar light collector consisted of a Fresnel lens for collecting solar light, and a tracking actuator for tracking solar light from sunrise to sunset to increase the light collection efficiency. The optical fiber that transmitted solar light was made of Glass Optical Fiber (GOF), and it had an excellent optical transmission rate. After collecting the solar light, the amount of light was measured at 5, 10, 15, 20, 25, and 30 cm distances from the GOF through the darkroom by using a light sensor logger connected to a quantum and pyranometer sensor. Compared with solar light, the light intensity of pyranometer sensor measured at 5 cm was 114% higher than solar light, and 61% at 10 cm. In addition, it was observed that it is possible to transmit the necessary amount of light for growing crops up to about 15 cm (as over 22%) through GOF. Therefore, adding diffusers to the solar light collector should be expected to replace artificial light in plant factories or plug seedlings nurseries for leafy vegetables. More studies on the solar light collection devices and the light transmission devices that have high light collection efficiency should be conducted.

• 청정기술
• /
• 제6권1호
• /
• pp.71-78
• /
• 2000

본 연구는 광합성 균주인 C. thiosulfatophium을 이용한 황화수소의 생물학적 탈황공정시 광에너지를 저감시키기 위해 광원의 종류와 광조사 유형에 따른 탈황효율을 조사하였다. 광에너지를 저감시키기 위해서는 반응기내 광분산 효율을 극대화시켜야 한다. 광이용효율을 높이기 위해, 세균농도와 생성부산물의 증가에 의한 빛의 산란과 흡수가 세균성장에 미치는 영향에 관한 연구와 미생물이 필요로 하는 파장의 빛을 최대로 공급하기 위해 LED, 백열등, 태양광 등을 이용한 광원의 최적화 연구, 그리고 외부조사형 광반응기의 광투과 효율의 한계를 극복하기 위한 광섬유를 이용한 내부조사형 광반응기에 대한 연구를 수행하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2018년도 추계학술대회
• /
• pp.480-483
• /
• 2018

본 논문에서는 CMOS센서 기반 가시광 통신 시스템에서 고속전송을 위한 다중 광원의 간섭제거 및 이미지 센싱 처리기술에 대해서 연구하였다. 이미지센서를 통한 광학카메라 통신에서 전송 용량을 향상 시키려면 각 LED에서 다른 데이터를 동시에 전송해야한다. 그러나 고속전송을 위한 다수의 LED광원 환경은 인접한 LED 간 간섭을 일으킬 수 있다. 이 경우, 가시광통신시스템은 일반적으로 세기 변조를 사용하기 때문에 다수의 LED가 동시에 데이터를 전송할 경우 인접한 LED의 빛 퍼짐 간섭으로 인해 각각의 LED들의 정확한 신호 검출이 어렵다. 이러한 문제를 해결하기 위해서, 듀얼 CMOS 센서를 사용하여 다수의 광원 LED의 ON/OFF 상태를 정확히 인식하고, 각각의 LED들의 이미지 시그널 프로세싱 기법을 제안하였다. 이러한 기법을 통해 다수의 LED픽셀을 정확하게 인식하여 다중LED OCVLC 시스템의 총 평균 비트 오류율과 처리량을 향상시킬 수 있다.

• 한국인터넷방송통신학회논문지
• /
• 제17권1호
• /
• pp.123-128
• /
• 2017

본 논문에서 오픈 소스 하드웨어인 아두이노를 기반으로 하는 스마트 센서 네트워크 시스템 모델을 제안하고 구현하였다. 제안된 스마트 센서 네트워크 시스템은 센서 및 센서의 값을 처리할 수 있는 오픈 소스 하드웨어 기반인 아두이노 등으로 구성된다. 또한 센서로 부터 측정된 센서값을 활용할 수 있는 제어 장치부에 전송할 통신 모듈도 구성하였다. 제어 장치부에서는 온도, 습도, 광량과 같은 센서 데이터를 메인 프로그램으로 전송하고 메인 프로그램은 데이터를 DB에 저장하거나 특정한 제어 신호의 값을 제어장치 혹은 엑츄에이터에 전송한다. 사용자는 또한 웹을 통해 스마트 센서 네트워크에서 측정된 값을 사용하는 시스템의 정보를 확인하거나 각종 액츄에이터를 원격 제어할 수 있으며 제안 시스템의 상황 인지 및 자율 제어 기능을 통해 스마트한 관리가 가능하다.

• 수산해양기술연구
• /
• 제52권3호
• /
• pp.183-190
• /
• 2016

This study carried out an experiment to find out the reaction of hairtail, Trichinus lepturus to the colors of LED light as a basic study on the development of the trolling gear and a method to enable the day-night operation. We used hairtails caught around Seongsan-po, Jeju Island by set nets and hairtail angling. The seven hairtails of the average length 68.9 cm (SD 9.2 cm) and the average weight 135.9 g (SD 47.9 g) were adapted themselves in the experimental water tank, 15 m Self-Governing 1.7 m in height and 1.5 m in depth, and then they were studied. We conducted experiment at the Ocean and Fisheries Research Institute in Jeju Special Self-Governing Province, from November to December 2015, and the sea surface temperature was between 16.5 and $19.5^{\circ}C$. The four colors of LED light, blue, white, green and red, were set up to transmit downward from the marginal area of tank. The 1 meter depth light intensity of LED colors is as follows: $0.09w/m^2/s$ (blue), $0.18w/m^2/s$ (white), $0.04w/m^2/s$ (green) and $0.007w/m^2/s$(red) To know the optimum LED color light, we selected one with better reaction rate after comparison of two colors simultaneously and the selected color was again compared to the other color in a tournament style two times a day (day and night) and ten times totally. The reaction rates were shown as the frequencies of hairtail appearance for 5 minutes in the lighting zone after turning on the LED lights. The reaction rate of the blue was at 97% unlike the red 3% (p < 0.001). The blue was at 75% unlike the green at 25% (p < 0.001). The blue was at 67% unlike the white at 33% (p < 0.001). Therefore, the color of light source showing the highest reaction rate was the blue.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 춘계학술발표대회
• /
• pp.31.1-31.1
• /
• 2009

Carbon nanotubes (CNTs) are attractive material because of their superior electrical, mechanical, and chemical properties. Furthermore, their geometric features such as a large aspect ratio and a small radius of curvature at tip make them ideal for low-voltage field emission devices including backlight units of liquid crystal display, lighting lamps, X-ray source, microwave amplifiers, electron microscopes, etc. In field emission devices for display applications, the phosphor anode is positioned against the CNT emitters. In most case, light generated from the phosphor by electron bombardment passes through the anode front plate to reach observers. However, light is produced in a narrow depth of the surface of the phosphor layer because phosphor particles are big as much as several micrometers, which means that it is necessary to transmit through the phosphor layer. Hence, a drop of light intensity is unavoidable during this process. In this study, we fabricated a transparent cathode back plate by depositing an ultra-thin film of single walled CNTs (SWCNTs) on an indium tin oxide (ITO)-coated glass substrate. Two types of phosphor anode plates were employed to our transparent cathode back plate: One is an ITO glass substrate with a phosphor layer and the other is a Cr-coated glass substrate with phosphor layer. For the former case, light was radiated from both the front and the back sides, where luminance on the back was ~30% higher than that on the front in our experiments. For the other case, however, light was emitted only from the cathode back side as the Cr layer on the anode glass rolled as a reflecting mirror, improving the light luminance as much as ~60% compared with that on the front of one. This study seems to be discussed about the morphologies and field emission characteristics of CNT emitters according to the experimental parameters in fabricating the lamps emitting light on the both sides or only on the cathode back side. The experimental procedures are as follows. First, a CNT aqueous solution was prepared by ultrasonically dispersing purified SWCNTs in deionized water with sodium dodecyl sulfate (SDS). A milliliter or even several tens of micro-liters of CNT solution was deposited onto a porous alumina membrane through vacuum filtration. Thereafter, the alumina membrane was solvated with the 3 M NaOH solution and the floating CNT film was easily transferred to an ITO glass substrate. It is required for CNT film to make standing CNTs up to serve as electron emitter through an adhesive roller activation.

• 한국광물학회지
• /
• 제22권4호
• /
• pp.407-415
• /
• 2009

전자빔 조사를 조사량에 따라 단계별로 수행하면서 전자빔을 조사하는 동안 다이아몬드 내에서 일어나는 질소관련 결함의 변화와 색상의 변화를 분광학적 방법으로 측정 분석하였다. 일반적으로 질소의 양이 적을수록 공공이 쉽게 생성되며 A집합체보다 B집합체가 많은 시료에서 공공이 빠르게 생성된다는 결과를 보였다. 그 이유로 공공의 생성 정도가 전자빔에 의해 파괴될 수 있는 크기를 가진 결함의 양 즉, platelets에 비례한다는 결론을 추론할 수 있었다. 그리고 조사량이 증가할수록 옅은 녹색을 지닌 청색에서 짙은 청색으로 변화한다. 이러한 청색의 발현은 GR1센터의 점진적인 증가로 GR1센터 흡수포논에 의한 흡수띠의 영역은 더욱 확장되어 가시광선이 투과하는 최고 파장대가 530 nm에서 500 nm로 이동하면서 나타나는 현상이다.