• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1715-1718
• /
• 2007

New ITO thin film of good performance has been developed by brand-new, plasma-damage-free sputtering process at the room temperature. The room temperature-processed ITO films with optimized conditions as neutral beam acceleration bias of -30V and In & Sn composition ratio of 99:01 gives lower resistivity as $4.22{\times}10^{-4}{\Omega}-cm$ and higher transmittance over 90% a wavelength of 550 nm. The transmission electron microscope (TEM) images of the films show a nano-crystalline structure.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.9A
• /
• pp.710-716
• /
• 2003

OFDM is a very attractive technique for achieving high-bit-rate data transmission and high spectrum efficiency. However one of disadvantages of OFDM signal is the high PAPR characteristic when multicarriers are added up coherently. In this paper, we propose an adaptive PTS scheme using two threshold levels for PAPR reduction and reducing the amount of PAPR calculations with clipping scheme. Simulation results show that it is almost same between average bit error rate performance of the proposed scheme and that of a conventional scheme. Also, we obtain a great performance gain in the amount of calculations compared to the conventional scheme. Therefore, proposed system has a good performance in data processing time in OFDM wireless communication systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.7B
• /
• pp.660-666
• /
• 2004

Overall TCP performance represented by end-to-end throughput is largely dependent upon its loss recovery performance. In particular non-congestion packet losses caused by transmission errors degrade TCP performance seriously. Using Markov process, we analyze TCP loss recovery performance for correlated packet losses caused by multipath fading. The results show that loss recovery performance can be severely affected by burstiness in packet losses, even if overall packet loss ratio is very low.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.1B
• /
• pp.31-39
• /
• 2007

Wireless sensor network can increase independence and flexibility of network because it consists of mobile node without the aid of fixed infra, but, by unrestricted for the participation and breakaway of node, it has the difficulty in routing which is a basic function of network operation. To solve those problems, a suggestion is the location-based routing algorithm using geological or logical location information. The suggested algorithm which is based on cluster for location information of sensor is applicable to wireless sensor network of discrete situation, which guarantees extension and mobility. By efficiency analysis and reactive routing algorithm of current DSR and AODV, packet transmission ratio, routing overheads, and average communication expense is compared as node increases.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.4
• /
• pp.398-403
• /
• 2006

This paper describes the evaluation of the long duration current impulse withstand characteristics of ZnO blocks for high voltage surge arresters. Four ZnO varistors were manufactured with the general ceramic production method and the long duration current impulse withstand test, electrical uniformity evaluation test and microstructure observation were performed. All varistors exhibited high density, which was in the range of $5.42{\sim}5.46g/cm^3$. In the electrical properties, the reference voltage of samples was in the range of $5.11{\sim}5.25\;kV$ and the residual voltage was in the range of $8.314{\sim}8.523\;kV$. In the long duration current impulse withstand test, sample No.2 and No.3 failed at the 2nd and 4th shot of series impulse currents, respectively, but the rest survived 18 shots during the test. Before and after this test, the variation ratio of the residual voltage of samples survived was below 0.5 %, which was in the acceptance range of 5 %. According to the results of the test, it is thought that if the soldering method is improved, ZnO varistors would be possible to apply to the high voltage arresters like the station class and transmission line arresters in the near future.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.282-285
• /
• 2006

This paper analyzed the characteristics of the Lossy JPEG of the meteorological satellite image, and analyzed the quality of the Lossy JPEG compression, which is proper for the LRIT(Low Rate Information Transmission) to be serviced to the SDUS(Small-scale Data Utilization Station) system of the COMS(Communication, Oceans, Meteorological Satellite). Since COMS is to start running after 2008, we collected the data of the MTSAT-1R(Multi-functional Transport Satellite -1R) for analysis, and after forming the original image to be used to LRIT by each channel and time zone of the satellite image data, we set the different quality with the Lossy JPEG compression, and compressed the original data. For the characteristic analysis of the Lossy JPEG, we measured PSNR(Peak Signal to Noise Rate), compression rate and the time spent in compression following each quality of Lossy JPEG compression. As a result of the analysis of the satellite image data of the MTSAT-1R, the ideal quality of the Lossy JPEG compression was found to be 90% in the VIS Channel, 85% in the IR1 Channel, 80% in the IR2 Channel, 90% in the IR3 Channel and 90% in the IR4 Channel.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.10.2-10.2
• /
• 2011

The design and synthesis of protein-like polymers is a fundamental challenge in materials science. A biomimetic approach is to explore the impact of monomer sequence on non-natural polymer structure and function. We present the aqueous self-assembly of two peptoid polymers into extremely thin two-dimensional (2D) crystalline sheets directed by periodic amphiphilicity, electrostatic recognition and aromatic interactions. Peptoids are sequence-specific, oligo-N-substituted glycine polymers designed to mimic the structure and functionality of proteins. Mixing a 1:1 ratio of two oppositely charged peptoid 36 mers of a specific sequence in aqueous solution results in the formation of giant, free-floating sheets with only 2.7 nm thickness. Direct visualization of aligned individual peptoid chains in the sheet structure was achieved using aberration-corrected transmission electron microscopy. Specific binding of a protein to ligand-functionalized sheets was also demonstrated. The synthetic flexibility and biocompatibility of peptoids provide a flexible and robust platform for integrating functionality into defined 2D nanostructures. In the later part of my talk, we describe the use of metal ions to construct two-dimensional hybrid films that have the ability to self-heal. Incubation of biomimetic peptoid polymers with specific divalent metal ions results in the spontaneous formation of uniform multilayers at the air-water interface. We anticipate that ease of synthesis and transfer of these two-dimensional materials may have many potential applications in catalysis, gas storage and sensing, optics, nanomaterial synthesis, and environmentally responsive scaffolds.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.35.2-35.2
• /
• 2011

나노와이어를 제작하는 많은 방법들 중에서 실리콘 기판을 무전해식각하여 실리콘 나노와이어를 제작하는 방법은 쉽고 간단하기 때문에 최근 많은 연구가 진행되고 있다. 무전해식각법을 이용한 실리콘 나노와이어 합성은 단결정 실리콘 나노와이어를 합성할 수 있고, p 또는 n형의 도핑 정도에 따라 원하는 전기적 특성의 기판을 선택하여 제작할 수 있다는 장점을 가지고 있다. 하지만 n형으로 도핑된 기판으로 나노와이어를 제작하였을 경우 식각으로 인한 나노와이어 표면의 거칠기로 인하여, 실제로는 n형 반도체 특성을 나타내지 않는 문제점을 가지고 있다. 따라서 본 연구에서는 무전해식각법으로 합성한 n형 나노와이어의 거칠기를 조절하고 filed-effect transistor (FET) 소자를 제작하여 나노와이어의 전기적 특성변화를 확인하였다. n형 나노와이어의 거칠기를 조절하기 위하여 열처리를 통해 표면을 산화시켰고, 열처리 시간에 따른 나노와이어 FET 소자를 제작하여 I-V 특성을 관찰하였다. 이때 절연막과 나노와이어 계면 사이의 결함을 최소화 하기 위하여 나노와이어를 poly-4-vinylphenol (PVP) 고분자 절연막에 부분 삽입시켰다. 나노와이어 표면의 거칠기는 high-resolution transmission electron microscopy (HRTEM)을 통하여 확인하였으며, 전기적 특성은 Ion/Ioff ratio, 이동도, subthreshold swing, threshold voltage 값 등을 평가하였다.

• Polymer(Korea)
• /
• v.37 no.3
• /
• pp.288-293
• /
• 2013

A group of molecularly imprinted polymers (MIPs) with specific recognition for chiral (S)-ibuprofen were successfully prepared based on hydrogen bonds, utilizing ${\alpha}$-methacrylic acid as a functional monomer. The IR analysis of MIPs showed that the blue- and red-shifted hydrogen bonds were formed between templates and functional monomers in the process of self-assembly imprinting and re-recognition, respectively. According to UV-Vis analysis, we found that the ratio of host-guest complexes between template molecule and functional monomer was 1:1. The effect of cross-linker's quantity on the polymerization was studied by transmission electron microscope (TEM). The adsorption selectivity experiments indicated that MIPs exhibited higher selectivity to (S)-ibuprofen than those to ketoprofen and (R)-ibuprofen, (S)-ibuprofen's structural analogs.

• Journal of the Mineralogical Society of Korea
• /
• v.9 no.1
• /
• pp.7-16
• /
• 1996

Partially sericitized tourmaline from a pegmatite, Black Hills, South Dakota, U.S.A., was investigated using high-resolution transmission electron microscopy (HRTEM). Muscovite occurs as the only alteration product of tourmaline, and it is developed extensively as narrow veinlets along the {110} and {100} cleavage directions of tourmaline, indicating that a cleavage-controlled alteration mechanism was dominant. Muscovite was characterized mainly as two-layer polytypes with minor stacking disorder, but tourmaline is almost free of structural defects. HRTEM images of tourmaline-muscovite interfaces revealed that the interfaces between two minerals are composed of well-defined {110} and {100} boundaries of tourmaline. The (001) of muscovite is in general parallel to the c-axis of tourmaline, but tourmaline and replacing muscovite do not show specific crystallographic orientation relationship; muscovite consists of numerous 100-1000$\AA$ thick subparallel packets, and the angles between the (001) of muscovite and (110) of tourmaline is highly variable. Al/Si ratios of both minerals suggest that tourmaline to muscovite alteration by late magnetic fluids has been facilitated by their similar Al/Si ratio in the incipient alteration stage, in that the hydration reaction with preservation of Al and Si would require only addition of K+ and H2O. Aluminous minerals other than muscovite were not characterized as the alteration products of tourmaline, indicating that tourmaline reacted directly to muscovite; the tourmaline alteration apparently occurred by the presence of residual fluids in which K+ is available and silica was not undersaturated.