• 한국전자파학회논문지
• /
• 제22권9호
• /
• pp.875-880
• /
• 2011

본 논문에서는 기존의 인덕터와 커패시터 소자만을 이용하여 2D cloaking 회로의 단일 셀을 설계했을 경우의 단점을 보완하기 위하여 2D 전송선 구조를 이용한 cloaking 회로를 설계하고 분석하였다. 2D 전송선 구조를 이용할 경우, 단일 셀의 크기와 필요한 소자의 값을 사용 가능한 범위 안에서 조절할 수 있다는 장점이 있다. 이에 필요한 모든 설계식을 유도하였다. 자유 공간에 완전 도체로 이루어진 원통형 산란체를 상정하고, 이에 대한 cloaking 회로를 유도된 설계식을 이용하여 설계하고 이에 대한 cloaking 효과를 우선 회로 시뮬레이터인 ADS를 이용하여 살펴보았다. 제시된 시뮬레이션 제원에서 cloaking medium 효과는 10.5 dB 이득으로 나타났다.

• Wind and Structures
• /
• 제29권5호
• /
• pp.339-359
• /
• 2019

Pre-stressed concrete poles are among the supporting systems used to support transmission lines. It is essential to protect transmission line systems from harsh environmental attacks such as downburst wind events. Typically, these poles are designed to resist synoptic wind loading as current codes do not address high wind events in the form of downbursts. In the current study, the behavior of guyed pre-stressed concrete Transmission lines is studied under downburst loads. To the best of the authors' knowledge, this study is the first investigation to assess the behaviour of guyed pre-stressed concrete poles under downburst events. Due to the localized nature of those events, identifying the critical locations and parameters leading to peak forces on the poles is a challenging task. To overcome this challenge, an in-house built numerical model is developed incorporating the following: (1) a three-dimensional downburst wind field previously developed and validated using computational fluid dynamics simulations; (2) a computationally efficient analytical technique previously developed and validated to predict the non-linear behaviour of the conductors including the effects of the pretension force, sagging, insulator's stiffness and the non-uniform distribution of wind loads, and (3) a non-linear finite element model utilized to simulate the structural behaviour of the guyed pre-stressed concrete pole considering material nonlinearity. A parametric study is conducted by varying the downbursts locations relative to the guyed pole while considering three different span values. The results of this parametric study are utilized to identify critical downburst configurations leading to peak straining actions on the pole and the guys. This is followed by comparing the obtained critical load cases to new load cases proposed to ASCE-74 loading committee. A non-linear failure analysis is then conducted for the three considered guyed pre-stressed concrete transmission line systems to determine the downburst jet velocity at which the pole systems fail.

• 전자공학회논문지A
• /
• 제31A권10호
• /
• pp.31-38
• /
• 1994

In this paper, the leaky wave readiation characteristics of a microstrip rectangular patch array is presented. The reflection and transmission characteristics are analyzed using the equivalent transmission line method. Since the leaky wave is generated from the periodic array, using the Floquet'theorem, leaky wave frequency range is predicted and confirmed by the measured reflection and transmission characterstics of the array. A 17 element microstrip patch array at X-Band is designed and tested. Teh scattering Characteristics show good agreement woth those obtained from the equivalent transmission line analysis. The radiatio characteristics at 10GHz using this method show about 3${\circ}$ shift in main lobe angle compared with measured results.

• KEPCO Journal on Electric Power and Energy
• /
• 제1권1호
• /
• pp.21-27
• /
• 2015

The goal of this study is the size and distribution of the electromagnetic force generated by the current flowing through the second underground line of 154kV power transmission cables by using electromagnetic finite element analysis. So we interpret how mutually electromagnetic force has an effect on the comparable judgement of Trefoil, Duct and Flat, which shows in a numerical arrangement. 154kV OF 1200SQ Cable 1.281km not only is applicable to modeling for underground transmission cable but also examine the effect of line to line, phase to phase and size and direction of the electromagnetic force preparing for the occurrence of normal state and single-phase earth fault, which are arranged in trefoil, duct and flat formation between sections. As showing how the trajectory, and size distribution of the electromagnetic force translate as the arrangement of the cables when a steady-state current and a fault current flows on the underground cables, I hope that when Underground transmission is designed, this data will be useful information.

• 한국산학기술학회논문지
• /
• 제10권6호
• /
• pp.1180-1185
• /
• 2009

본 논문에서는 T-접합선로의 집중소자 등가회로를 고려한 저역통과 여파기를 제안하였다. 일반적인 저역통과 여파기 설계 시 발생하는 T-접합선로의 특성에 따른 주파수 변이 특성을 해결하기 위해 T-접합선로 등가회로의 소자 값을 구하는 수식을 유도 하였다. 또한, 전자장 시뮬레이터(HFSS)를 이용하여 T-접합선로를 디임베딩하였다. 이로써 선로의 임피던스 허수값들이 일치되게 하여 T-접합선로 등가회로에서 집중소자의 정확한 값을 구하였다. 그리고 이 값들을 이용하여 저역통과 여파기를 설계한 결과, 집중소자 여파기의 주파수 특성과 분포소자 여파기의 주파수 특성이 매우 잘 일치함을 확인할 수 있었다.

• Earthquakes and Structures
• /
• 제19권6호
• /
• pp.445-457
• /
• 2020

An ultra-high voltage (UHV) transmission system has the advantages of low circuitry loss, high bulk capacity and long-distance transmission capabilities over conventional transmission systems, but it is easier for this system to cross fault rupture zones and become damaged during earthquakes. This paper experimentally and numerically investigates the seismic responses and collapse failure of a UHV transmission tower-line system crossing a fault. A 1:25 reduced-scale model is constructed and tested by using shaking tables to evaluate the influence of the forward-directivity and fling-step effects on the responses of suspension-type towers. Furthermore, the collapse failure tests of the system under specific cross-fault scenarios are carried out. The corresponding finite element (FE) model is established in ABAQUS software and verified based on the Tian-Ma-Qu material model. The results reveal that the seismic responses of the transmission system under the cross-fault scenario are larger than those under the near-fault scenario, and the permanent ground displacements in the fling-step ground motions tend to magnify the seismic responses of the fault-crossing transmission system. The critical collapse peak ground acceleration (PGA), failure mode and weak position determined by the model experiment and numerical simulation are in relatively good agreement. The sequential failure of the members in Segments 4 and 5 leads to the collapse of the entire model, whereas other segments basically remain in the intact state.

• 전기학회논문지
• /
• 제56권9호
• /
• pp.1632-1637
• /
• 2007

This paper analyses current densities induced inside human body of lineman for 765kV transmission line when he wears a protective cloth or not. Applying the boundary element method, we calculate current densities induced in organs inside a worker in case he was located at 15[cm], 30[cm], 50[cm], and 100[cm] far from a prefabricated jumper. As results of study, we find a maximum current density induced in all organs may be higher than $10[mA/m^2]$ if he does not wear protective clothes. We also know high permeability materials can lower current density more than high conductivity materials.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권8호
• /
• pp.783-788
• /
• 1996

In this paper, the high-$T_c$ , superconductor (HTS) microstrip patch antenna which is directly coupled to a microstrip transmission line is designed and the numerical solution which evaluate near electromagnetic field of HTS antenna is presented. This solution uses the interpolation function with the vector edge triangular element. The advantage of this element is the elimination of spurious solutions attributed to the lack of enforcement of the divergence condition. The results of this method have a good agreement with $TM_10$ mode in HTS microstrip patch antenna and show that the computation of resonant length considering the fringing capacitance effect at radiating edge are proper.

• 전기화학회지
• /
• 제4권1호
• /
• pp.26-33
• /
• 2001

프랙탈 기하학의 계면 전기화학에로의 응용과 관련하여 프랙탈 전극의 임피던스 거동에 대하여 다루었다. 우선, 전기화학적 임피던스 측정시에 자주 관찰되는 constant phase element (CPE)를 간략히 설명하였고, 이와 관련하여 de Levie가 제안한 transmission line model에 대하여 다루었다. CPE현상의 해석을 위하여 Nyikos 와 Pajkossy가 제안한 프랙탈 기하학을 이용한 접근 방법을 소개하였고, 또한 프랙탈 차원과 CPE exponent 사이의 관계를 이론적으로 유도하였다 마지막으로 rough혹은 porous전극의 임피던스 거동을 설명하기 위해 제안된 여러 가지 프랙탈 모델들에 대하여 설명하였다.

• 전기학회논문지
• /
• 제63권3호
• /
• pp.404-408
• /
• 2014

In this research we evaluate the excitation homogeneity and SAR of three different Tx arrays after B1+ Shimming in the human body at 3T. Through the simulations, we compared the field properties that are standard deviation and mean value of transverse magnetization for 1) strip line TEM array, 2) rectangular loop array, 3) combined array of strip line element and rectangular loop and shown the utilities of B1+ shimming in human body model. After B1+ shimming, it is evaluated four different types of SAR for body mesh through whole body simulation; those are average, maximum 1-cell, maximum 1-gram, and maximum 10-gram SAR. It appears that in this particular comparison an array based on strip line elements can produce better homogeneity and lower SAR than an array of rectangular loops or an array of combined elements (strip line and loop). While many factors are considered in designing coils for production, it is hoped that methods and results like these will be used in the future to guide decisions and maximize benefit.