• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1656-1660
• /
• 2008

Internal noise level of a train running in tunnel is influenced by sound transmission coefficients of floor, side door, window and gangway as well as by the sound power levels of major noise sources. The structure of a gangway should be strong enough for the safety of passengers while it should be flexible enough for the movement of a train in curves. Due to this the sound transmission coefficients of gangways are relatively low compared to those of carbody structure. The effect of the sound transmission coefficient of the gangway is studied in this paper in regards to the existence of end doors.

• Wind and Structures
• /
• 제35권2호
• /
• pp.93-108
• /
• 2022

Steel tubular towers are commonly used in UHV and long crossing transmission lines. By considering effects of the model scale, the solidity ratio and the ratio of the mean width to the mean height, wind tunnel tests under different wind speeds on twenty tubular steel tower body models and twenty-six tubular steel cross-arm models were completed. Drag coefficients and shielding factors of the experimental tower body models and cross-arm models in wind directional axis for typical skewed angles were obtained. The influence of the lift forces on the skewed wind load factors of tubular steel tower bodies was evaluated. The skewed wind load factors, the wind load distribution factors in transversal and longitudinal direction were calculated for the tubular tower body models and cross-arm models, respectively. Fitting expressions for the skewed wind load factors of tubular steel bodies and cross-arms were determined through nonlinear fitting analysis. Parameters for skewed wind loads determined by wind tunnel tests were compared with the regulations in applicable standards. Suggestions on the drag coefficients, the skewed wind load factors and the wind load distribution factors were proposed for tubular steel transmission towers.

• Structural Engineering and Mechanics
• /
• 제81권4호
• /
• pp.481-492
• /
• 2022

Cycloidal ball planetary transmission (CBPT) has many applications as precision reducer, such as precision machinery and automation drive systems etc. The traditional analytical model of CBPT cannot accurately describe the change of the normal force of meshing points, and thus cannot describe the precise transmission process of meshing pairs. In the paper, a method for deriving the normal force equation is put forward by using the non-linear relationship between force and deformation in elastic mechanics. The two-point contact analytical models of all the meshing pairs are established to obtain the micro-displacement analytical model of CBPT under axial pre-tightening. Then, the non-real-time two-point contact analytical models of all the meshing pairs are further constructed to obtain the normal force expression to determine the critical compression coefficients. Experimental investigations are performed to verify the analytical model using the critical compression coefficients.

• 비파괴검사학회지
• /
• 제28권3호
• /
• pp.292-301
• /
• 2008

A linearized model for hysteretic acoustic nonlinearity of imperfectly joined interface is proposed and analyzed by using Coulomb damping to investigate the characteristics of the reflection and transmission coefficients for harmonic waves at the contact interface. Closed crack is modeled as non welded interface that has nonlinear discontinuity condition in displacement across its boundary. Based on the hysteretic contact stiffness of the contact interface, the reflected and transmitted waves are determined by deriving the tractions on both sides of the interface in terms of the discontinuous displacements across the interface. It is found that the amplitudes of the reflected and transmitted waves are dependent on the frequency and the hysteretic stiffness. As the frequency of the incident wave increases, the higher reflection and lower transmission are obtained. It also shows that the hysteresis of the interface increases the reflection coefficient, but reduces the transmission coefficient. A fatigue crack is also made in aluminum specimen to demonstrate these characteristics of the reflection and transmission of contact interfaces.

• 한국산학기술학회논문지
• /
• 제17권7호
• /
• pp.204-210
• /
• 2016

본 논문에서는 이소 옥탄을 연료로 사용하는 층류 확산 화염에서 불완전 연소의 결과로 발생하는 그을음 입자의 성장 및 산화과정을 조사하였다. 또한, 철 연료첨가제의 그을음 발생 억제 효과를 평가하였다. 광 계측 기술을 이용하여 화염 안 그을음 입자의 탄성 산란 광을 화염의 높이에 따라 계측하고, 미광 보정 과정을 통하여 그을음 입자의 미분 산란 계수를 구하였다. 이 미분 산란 계수를 비교하여, 화염에서 그을음 입자의 성장 및 산화과정을 조사하였는데, 산화과정을 통하여 화염 내의 그을음 양이 감소하는 것을 관찰하였다. 철 연료 첨가제를 첨가한 화염에 대해서 동일한 연구 방법으로 구한 미분 산란 계수가 연료 첨가제가 첨가되지 않은 화염보다 더 작은 값을 보였다. 또한, 화염의 높이에 따라 반경방향으로 투과율을 측정하였는데, 연료 첨가제를 첨가한 연료의 화염은 투과율이 산화영역에서 약 5% 증가하는 것을 관찰하였고, 이는 미분 산란 계수와 동일한 경향을 보였다. 이것은 연료첨가제의 성분이 촉매 역할을 하여 그을음이 산화를 촉진해 화염 안의 그을음 양이 감소한 것으로 사료된다.

• 전자공학회논문지B
• /
• 제32B권1호
• /
• pp.64-72
• /
• 1995

We propose a new image coding method which takes into account both statistical redundancy and perceptual irrelevancy of the DCT coefficients so as to provide a high quality of the reconstructed images with a reduced transmission bit rate First, a block of DCT coefficients are decomposed into 16 subvectors so as for a subvector to convey key information about one of the low-pass or the dirctional filtered images. Then, the most significant subvector is selected as the principal edge of the block and then vector quantized. After that, the residuals of the block are computed and then sequentially quantized through aforementioned procedure until the quantization distortion is smaller than the target distortion. The proposed scheme is good at encoding images with a variety of transmission bit rates, especially at very low bit rate coding. In addition, it is another benifit of the proposed scheme that an image can be quantized with a wide range of the transmission bit rates by simply adapting the stopping criterion of the sequential vector quantizer according to the target distortion of the reconstructed image.

• 천문학회지
• /
• 제20권1호
• /
• pp.27-47
• /
• 1987

In the present study a two-mode, separately concurring resonant cavity model is proposed for theoretical interpretation of the 3 minute umbral oscillation. The proposed model has been investigated by calculating the transmission coefficients of the waves propagating through the umbral photosphere (photospheric weak-field cavity) and chromosphere (chromospheric strong-field cavity) into the corona, for 3 different umbral model atmospheres by Staude (1982), Beebe et al. (1982) and Avrett (1981). In computing the transmission coefficients we made use of multi-layer approximation by representing the umbra] atmosphere by a number of separate layers with (1) temperature varying linearly with depth and (2) temperature constant within each layer. The medium is assumed to be compressible, non-viscous, perfectly conducting under gravity. The computed resonant periods, transmission spectra, phase spectra, and kinetic energy density of the waves associated with the oscillations are presented in comparison with the observations and their model dependent characteristics are discussed.

• 전자공학회논문지B
• /
• 제31B권3호
• /
• pp.69-79
• /
• 1994

DCT image coding has been well known for its compression efficiency. Its nature makes it also suitable for efficient progressive transmission and reconstruction since low frequency transform coefficients contain most of the energy of image signals. In this paper, we propose a progressive transmission technique of DCT image by non-sequential bit ordering using Lloyd-Max quantizer. And then, we will show that the Lloyd-Max quantizer can be embedded quantization. In simulation results, the proposed method show better subjective picture and MSE of the reconstructed image than the conventional zig-zag scanning transmission of transform coefficients.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2003년도 한국우주과학회보 제12권2호
• /
• pp.35-35
• /
• 2003

In satellite communication, attenuation, scattering, and depolarization of relatively high frequency waves such as millimeter waves are strongly influenced by rain. In order to study the rain attenuation, we introduce a new theoretical method, which enables us to obtain the reflection and transmission coefficients in arbitrary medium. We adopt this method to examine how the electromagnetic radiation is affected by homogeneous spherical raindrops. It is assumed that the raindrop shape is spherical and linearly locate in one direction. For the radiation of wave in raindrops, we consider the effective permittivity, in which the raindrop is assumed to be spherical. By adopting the invariant imbedding approach, the 1st order differential equations are derived for the reflection and transmission coefficients. We investigate the transmission and reflection of waves for various incident angles when the spherical raindrops are assumed to have random sizes.

• 한국표면공학회지
• /
• 제35권5호
• /
• pp.289-294
• /
• 2002

ZnTe films have been grown on (100) GaAs substrate with two representative problems. The one is lattice mismatch, the other is thermal expansion coefficients mismatch of ZnTe /GaAs. It claims here, the relationship of film thickness and defects distribution with (100) ZnTe/GaAs using hot wall epitaxy (HWE) growth was investigated by transmission electron microscopy (TEM). It analyzed on the two-sort side using TEM with cross-sectional transmission electron microscopy (XTEM) and high-resolution electron microscopy (HREM). Investigation into the nature and behavior of dislocations with dependence-thickness in (100) ZnTe/ (100) GaAs hetero-structures grown by transmission electron microscopy (TEM). This defects range from interface to 0.7 $\mu\textrm{m}$ was high density, due to the large lattice mismatch and thermal expansion coefficients. The defects of low density was range 0.7$\mu\textrm{m}$~1.8$\mu\textrm{m}$. In the thicker range than 1.8$\mu\textrm{m}$ was measured hardly defects.