• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 춘계학술대회 논문집
• /
• pp.618-625
• /
• 2000

In general, a third rail current collecting shoegear is used widely in the light rail transit system, which is more efficient than overhead pantograph. Therefore, Korean standard specifications for the light rail transit prescribes for the application of it. This paper describes the development of third rail current collecting shoegears, which is suitable to Korean situation and satisfied with Korean standard specifications, Two types are developed for steel wheel AGT system and rubber tyred AGT system, and various experiments are executed.

• 한국철도학회논문집
• /
• 제5권2호
• /
• pp.112-117
• /
• 2002

Reduction of noise level in the cabin of urban transit unit is an important issue to enhance the comfortability of passengers. It is made clear that a cause of increased noise level in cabin is the imperfect airtightness of entrance doors. In this study, the sliding-plug door system is developed to reduce the noise level of cabins by securing the airtightness of entrance door. The sliding-plug door system is composed of air-driven engine, swing arms, guide rails, guide rollers and locking devices. It is economical owing to using the previous door engine system. It is also adequate for the platform system of our subway station. It was tested to prove the reliability of system and was applied to standard urban transit unit. The effectiveness of noise reduction in cabin resulting form the sliding-plug door system was confirmed by test results.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.954-963
• /
• 2006

PRT(Personal Rapid Transit) is alternation mode of auto and advanced transportation system as future transportation mode cope with the situation caused by increasing traffic demand, vehicle, environment, energy problem. but there is no place where PRT is operated therefore it is necessary of study on application of PRT The purpose of this study is putting into shape of fundamental notion and role of PRT as transit system and studying of domestic application possibility We expect that PRT make transit will make variety and be able to connect with mass transportation facility, have a connection between trunk line and branch line, be a effective local transportation system within CBD, be a transportation system within leisure complex. This study focus on connection with mass transportation facility in the middle of 5 type, we class as. and we investigate application of PRT by process of making a choice applicable case area

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.748-754
• /
• 2006

Small Rapid Transit System(SRTS) will be defined fully automated urban transit system providing a rapid and personalized door to door transport service. Conventional forms of public transit require passengers to collect in groups until a large vehicle is scheduled to travel on predetermined routes. In contrast, SRTS offers personal transport with no waiting, and takes passengers non-stop to their chosen destination. This is a transport system which is as convenient as, or in congested environments more convenient than, the car, but with minimal environmental impact. Accordingly the foundation study of choice system size for development of SRTS

• 한국안전학회지
• /
• 제27권6호
• /
• pp.31-42
• /
• 2012

Urban transit vehicle that uses electrical energy, is faster, safer and energy-efficient public transit than other means. As a Research method, the Matlab/Simulink are used to modeling a regenerative brake-capable train, and actual parameters such as powering and braking characteristics, all kinds of resistance, passenger load, velocity, gradient, radius of curve etc and powering and breaking commands per time or distance are inputted to train's dynamic equation, then a simulation program is made and used to yield train driving pattern and driving time and the amount of driving energy used thereby at auto and manual operation and at all sector.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1177-1178
• /
• 2007

There is a possibility of saying that the accident of urban transit vehice or deficit operation is caused by the m.aintenance. urban transit vehice where the efficiency is good though does the time passes and it becomes old anger and does not display that efficiency not only the cause of formation accident does becomes. The breakdown about under occurring before getting up an accident, appropriately shifting the parts is to a maintenance very the pending question fact which is important is a possibility of doing. From there is by an urban transit vehice, Mauntenance in reliability base grudge is a tool of confirms an improvement point and the place where it judges. From the research which it sees will present about technical development plan of Maintenance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1179-1180
• /
• 2007

Urban transit is system that offer target Performance and function because various lower part system such as vehicles, signaling, power supply, rail track is consisted as complex. It is important first of all that describe correctly system requirement until configuration of system, design, manufacture, installation and test verification so that the complicated urban transit system is to act safety and reliable and to display target Performance and function properly. The system requirement assist the system developer to comprehensive the performance and function of system in basic design. Therefore, In this paper wishes to study way to analyze system of system requirement and apply to Urban transit.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1187-1188
• /
• 2007

Most of the surveillance systems are based on CCTV, closed circuit Television. A surveillance system for urban transit is also based on CCTV. Urban transit operation corporations have a CCTV system and a lot of cameras to monitor the situation for the passengers, and the important facilities. But this system has some problems that it cannot respond to a state of emergency immediately. In this paper, we describe a configuration of an intelligent surveillance system for urban transit to solve that problems. Our proposed configuration include a camera with some intelligent module, and a processor to integrate various data from not only cameras, but also sensors such as a temperature sensor, a heat sensor, sound sensor and etc. and some other data generator. This system configuration can decide the state of the passengers and the facilities. The surveillance system with this configuration can available with the existing surveillance system without a considerable improvement.

• 대한교통학회:학술대회논문집
• /
• 대한교통학회 1998년도 Proceedings The 4th International Transport Symposium
• /
• pp.100-107
• /
• 1998

With the rapid development of Urban Mass Transit in China, the Intelligent Transport System becomes inevitable. Based on the brief introduction of the blueprint of Urban Mass Transit in Shanghai, this paper analyses in detail the components and functions of Automatic Train Control (ATC) system applied in Shanghai Metro, presents the key technology of the main three subsystems of the ATC system : Automatic Train Supervision (ATS) subsystem, Automatic Train Protection (ATP) subsystem, Automatic Train Operation (ATO) subsystem. After reading this paper, you will have an general grasp of ATC system. At the end of the paper, it suggests a good resolution about the ATC system equipment to be made in China. If you are interested in the resolution, we'd like to exchange our thought.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.2065-2069
• /
• 2008

Urban transit consists of signaling system, railway systems, power facilities systems and the other complicated facilities and the standards notify the standardizations, safety standards, performance standards and quality certification standards according to the Urban Transit Act. The government notifies and recommends these standards to improve the performance, safety and maintenance efficiency of urban transit. Now, we need to manage the records and traceability of the standards because they have reciprocal relations with the others so that, if some standards have been changed it could make some problems to the others. As a result, in this research, we suggest the way to manage the traceability of the standards by using the computation support tools.