• Economic and Environmental Geology
• /
• v.39 no.1 s.176
• /
• pp.39-51
• /
• 2006

Rare earth elements(REEs) in transgressive shelf core sediments were analysed to identify constraints of REE distribution patterns and sediment provenances in the northern East China Sea(ECS). Sediments of Chinese and Korean rivers, such as Huanghe and Yangtz rivers, Keum and Yeongsan rivers that supply sediments to the northern ECS, were also analysed to figure out their typical REE distribution patterns. The distribution patterns of Chinese and Korean river sediments, which are normalized with upper continental crust (UCC) REE values, appear to be enriched in middle rare earth elements (MREEs) in Chinese river sediments, whereas in light rare earth elements (LREEs) in Korean river sediments. We assign the MREE-enriched convex-type distribution pattern in Chinese river sediments as 'C-type', and the LREE-enriched linearly decreasing pattern in Korean river sediments as 'D-type'. A major constraint of the REE concentration in northern ECS core sediments is interpreted to be LREE-enriched monazite $((Ce,\;La)PO_4)$ that is ubiquitous in and around the study area. Meanwhile, the distribution pattern of northern ECS sediments appears to be between the C-type and the D-type. We suggest that the nothern ECS sediments are the mixture of China and Korea riverine sediments that have been accumulated in paleo-river mouth, paleo-coast, and present-day shelf environment as well.

• 한국해양학회지
• /
• v.29 no.4
• /
• pp.357-365
• /
• 1994

The sediments on the continental shelf off the west coast (middle part) of Korea are divided into northern sandy deposits and southern muddy sediments, respectively. The sandy sediments consist dominantly of quartz and feldspar grains, representing mature-stage sediment in composition. Further-more, the presence of iron-stained quartz grain and glauconite does indicate that the sediments are similar to the relict sediments on the outer shelf of Yellow Sea and East China Sea. These sandy sediments are interpreted as a basal sands that were deposited during the transgression period due to sea-level rise after to last glacial maximum (LGM). The tidal deposits in the Namyang Bay, the west coast of Korea are divided vertically into the upper layer of muddy sediments and the lower layer of sandy sediments. the upper layer sediments contain abundant rock fragments, and are interpreted as the modern tetragenous sediments. The lower layer sediments, on the other hand, are rich in quartz and feldspar grains, representing high index of sediment maturity ratio. the lower layer sandy deposits show the presence of iron-stained.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.8 no.4
• /
• pp.369-379
• /
• 2003

Analysis of high-resolution seismic profiles and sediment data from the southeastern continental shelf of Korea reveals that the late Quaternary deposits consist of a set of lowstand (LST), transgressive (TST), and highstand systems tracts (HST) that corresponds to the sea-level change after the Last Glacial Maximum. LST (Unit I) above the sequence boundary consists of sandy mud or muddy sand deposited during the last glacial period and is confined to the shelf margin and trough region. TST (Unit II) between transgressive surface and maximum flooding surface consists of sandy sediments deposited during the postglacial transgression (15,000-6,000 yr BP). Although TST is widely distributed on the shelf, it is much thinner than LST and HST. On the basis of distribution pattern, TST can be divided into three sub-units: early TST (Unit IIa) on the shelf margin, middle TST (Unit IIb) on the mid-shelf, and late TST (Unit IIc) on the inner shelf, respectively. These are characterized by a backstepping depositional arrangement. HST(Unit III) above the maximum flooding surface is composed of the fine-grained sediments deposited during the last 6000 yrs when sea level was close to the present level and its distribution is restricted to the inner shelf along the coast.

• Journal of the Korean earth science society
• /
• v.33 no.3
• /
• pp.242-258
• /
• 2012

The Yellow Sea has sensitively responded to high-amplitude sea-level fluctuations during the late Quaternary. The repeated inundation and exposure have produced distinct transgression-regression successions with extensive exposure surfaces in Kyeonggi Bay. The late Quaternary strata consist of four seismic stratigraphic units, considered as depositional sequences (DS-1, DS-2, DS-3, and DS-4). DS-1 was interpreted as ridge-forming sediments of tidal-flat and estuarine channel-fill facies, formed during the Holocene highstand. DS-2 consists of shallow-marine facies in offshore area, which was formed during the regression of Marine Isotope Stage (MIS)-3 period. DS-3 comprises the lower transgressive facies and the upper highstand tidal-flat facies in proximal ridges and forced regression facies in distal ridges and offshore area. The lowermost DS-4 rests on acoustic basement rocks, considered as the shallow-marine and shelf deposits formed before the MIS-6 lowstand. This study suggests six depositional stages. During the first stage-A, MIS-6 lowstand, the Yellow Sea shelf was subaerially exposed with intensive fluvial incision and weathering. The subsequent rapid and high amplitude rise of sea level in stage-B until the MIS-5e highstand produced transgressive deposits in the lowermost part of the MIS-5 sequence, and the successive regression during the MIS-5d to -5a and the MIS-4 lowstand formed the upperpart of the MIS-5 sequence in stage-C. During the stage-D, from the MIS-4 lowstand to MIS-3c highstand period, the transgressive MIS-3 sequence formed in a subtidal environment characterized by repetitive fluvial incision and channel-fill deposition in exposed area. The subsequent sea-level fall culminating the last glacial maximum (Stage-E) made shallow-marine regressive deposits of MIS-3 sequence in offshore distal area, whereas it formed fluvial channel-fills and floodplain deposits in the proximal area. After the last glacial maximum, the overall Yellow Sea shelf was inundated by the Holocene transgression and highstand (Stage-F), forming the Holocene transgressive shelf sands and tidal ridges.

• Economic and Environmental Geology
• /
• v.44 no.4
• /
• pp.303-312
• /
• 2011

Analysis of high-resolution seismic profiles from the southeastern continental shelf of Korea reveals that the Holocene transgressive deposits consist of five sedimentary units characterized by retrograding or backstepping depositional arrangements. Unit I, forming a linear sediment body along the shelf margin, is an ancient beach/shoreface deposit formed during the early stage of transgression. During the transgression, the paleo-channels were backfilled with fluvial or coastal-plain sediments, forming Unit II as an incised-channel fill deposit. The near-surface sediment was reworked and eroded by shoreface erosion, forming a thin lag of sands (Unit III) on the midshelf. During the middle stage of the transgression, the shoreline may have stabilized at around 70 - 80 m below the present sea level for some period of time to allow the formation of sand ridge systems (Unit IV). Unit V in the inner shelf was deposited in an estuarine environment during the middle to late stage of transgression. Such transgressive stratigraphic architecture is controlled by a function of lateral changes in the balance among rates of relative sea-level rise, sediment input and marine processes at any given time.

• The Korean Journal of Petroleum Geology
• /
• v.5 no.1_2 s.6
• /
• pp.1-8
• /
• 1997

Seismic stratigraphic analysis of the high resolution profiles obtained from the southeastern shelf of Korea divided the deposits into 4 sequences; 1) sequence D, 2) sequence C, 3) sequence B and 4) sequence A (Holocene sediments). Sequence D was deposited in shallow-water environment at west of the Yangsan Fault as the basin subsided. On the other hand, the eastern part was formed at the slope front. Landward part of the slope-front fill sediments were eroded and redeposited nearby slope due to the syndepositional tilting of the basin. This tilting probably resulted from the continuous closing of the Ulleung Basin. Sequence C is made of stacked successions of the lowstand fluvial sediments, transgressive sediments and marine highstand sediments derived from the paleo-river in the western part of the Yangsan Fault. Sequence C in the eastern part of the Yanshan Fault was formed at the shelf break. Progradation of the lowstand sediments resulted in broadening of the shelf. Sequence C in the eastern part was also tilted but the tilting was weaker than in Sequence D. During the formation of sequence B the tilting stopped and the point source instead of the line source started in both sides of the Yangsan Fault. Sequence B was composed of the highstand systems tract partially preserved around the Yokji island, lowstand systems tract mainly preserved in the Korea Trough and transgressive systems tract. After the stop of the tilting, the force of compression due to the closing of the Ulleung Basin may be released by the strike-slip faults instead of tilting.

• 한국해양학회지
• /
• v.30 no.4
• /
• pp.271-278
• /
• 1995

A study of heavy mineral sands in terms of heavy mineral group and concentration has been carried out by analyzing 88 grab samples from the continental shelf off the southeast coast of Korea. Heavy mineral groups seem to be outlined and classified into four regions in the study area: 1) the western region; high concentrations of stable minerals, such as opaque mineral, magnetite, garnet and ZTR, 2) Korean Trough region; moderate concentrations of stable minerals, 3) the eastern region; abundant altered mineral and amphibole with minor of pyroxene concentration, and 4) the northeastern shelf-break region; low concentration of stable minerals with abundant altered minerals. The sedimentologic natures of four major heavy mineral regions (groupings) seem to be influenced by physical, dynamic and hydraulic milieu and also aerial and/or subaqueous weathering processes. It seems to be, further, plausible that shallow marine waves and currents associated with neritic dynamic condition of transgressive sea might be very effective on the concentration and groupings (sorting) of heavy min-erals in the surficial sediments of the continental shelf. The pyroxene-abundant heavy mineral suite (group), in fact, seems to suggest a sediment source from Japanese Islands.

• 한국해양학회지
• /
• v.28 no.2
• /
• pp.114-120
• /
• 1993

Numerical method of nonlinear regression was introduced to characterize grain-size distribution more effectively than using the traditional textural parameters. This technique proved critical particularly to multimodal size distributions, as exemplified by samples from Cheju strait continental shelf. Grain-size analysis of samples collected from the Cheju Strait continental shelf reveals that 86% of the grain-size distributions are multimodal. As multimodal grain-size distribution deviates from the statistical (log) normal distribution, the grain-size parameters traditionally used in sediment studies do not describe the distribution efficiently. Therefore, the use of grain-size curves into elementary normal component curves was used. Means and standard deviations of 387 decomposed normal components were decided by a decomposition method (nonlinear least square regression) from 167 size curves of the Cheju Strait sediments. The mean values of decomposed normal components show peaks at 1-3 phi and 8-9 phi size classes. The plot of mean values of the coarse fraction normal components on the map shows a characteristic and complex areal distribution. On the basis of the areal distribution of the mean values of the components and that of isopach of total Plenipotence sediment, the areal distribution of layers composing a transgressive sand of Late Plenipotence age were revealed.

• 한국해양학회지
• /
• v.30 no.4
• /
• pp.332-340
• /
• 1995

To study stratigraphy of tidal basin deposits, related unconformity and source of late Holocene tidal sediments in Namyang Bay, west coast of Korea, total 8 vibracore sediments have been analyzed. The uppermost stratigraphic sequence of the late Holocene Namyang intertidal deposit overlies three different stratigraphic sequences (1) oxidized reddish brown muddy deposit (Yongduri Member), (2) oxidized yellow deposit (Kanweoldo Formation) and (3) the pre-Cambrian gneiss complex unconformably. Accordingly, three unconformities between those different sequences are recognized. The Namyang tidal deposits (late Holocene) with several meter thickness are mostly coarsening upward sequence suggesting transgressive phase during a continuous rise of sea level. The tidal deposit vibracored down to 4.5 m in depth contains clastic glauconite sands (2% in average) from 2.5 m to the vibracore bottom. These glauconite sands are considered to be transported to the site of Namyang Bay tidal sedimentation from offshore continental shelf of the Yellow Sea along the course of late Holocene sea-level rise.

• 한국해양학회지
• /
• v.29 no.4
• /
• pp.338-356
• /
• 1994

Sediment samples from the continental shelf of the South Sea of Korea are analysed to determine the concentration of Al, Fe, Mn, cu, Ni, Zn, Co, Cr and Pb. among these samples, fine-grained sediments were also analysed by a sequential extraction technique to know geochemical forms of the metals in this environments. The total concentration of Al, Fe, Cr, Ni, Cu and Zn in bulk sediments decreased gradually with the increase of distance from the coastal zone. This distribution patterns are well coincide with grain size distribution. However, the patterns of Mn, co and Pb do not follow such and overall distribution. The concentration of Pb, particularly, did not show any features in areal distribution, which may be result from different pathways to the sediments, compared to the other metals. the speculation data show that a considerable amount of Cd, Mn and Co are bounded in the carbonate fraction, accounting for 42.8%, 40.3% and 30.6%, respectively. Cu, Zn, Mn and Fe are largely associated to oxide fraction with proportions of 34.4%, 23.1%, 15.5% and 13.7%, respectively. However, the metals in residual fraction account for more than 50% of the total metal concentration, except for Mn. These observations emphasize that residual fraction in the dominant component controlling the elemental concentration.quartz and glauconite grains.Accordingly,these sediments are interpreted as an extension part of transgressive sand deposit that are widely distributed on the continental shalf floor of southern Yellow Sea.