• Geomechanics and Engineering
• /
• 제19권5호
• /
• pp.369-381
• /
• 2019

The objective of this paper is to study the two dimensional deformation in transversely isotropic thermoelastic medium without energy dissipation due to time harmonic sources using new modified couple stress theory, a continuum theory capable to predict the size effects at micro/nano scale. The couple stress constitutive relationships have been introduced for transversely isotropic thermoelastic medium, in which the curvature tensor is asymmetric and the couple stress moment tensor is symmetric. Fourier transform technique is applied to obtain the solutions of the governing equations. Assuming the deformation to be harmonically time-dependent, the transformed solution is obtained in the frequency domain. The application of a time harmonic concentrated and distributed sources have been considered to show the utility of the solution obtained. The displacement components, stress components, temperature change and couple stress are obtained in the transformed domain. A numerical inversion technique has been used to obtain the solutions in the physical domain. The effects of angular frequency are depicted graphically on the resulted quantities.

• Smart Structures and Systems
• /
• 제14권5호
• /
• pp.831-845
• /
• 2014

This paper proposed a discrete wavelet transform based method for time-varying physical parameter identification of shear type structures. The time-varying physical parameters are dispersed and expanded at multi-scale as profile and detail signal using discrete wavelet basis. To reduce the number of unknown quantity, the wavelet coefficients that reflect the detail signal are ignored by setting as zero value. Consequently, the time-varying parameter can be approximately estimated only using the scale coefficients that reflect the profile signal, and the identification task is transformed to an equivalent time-invariant scale coefficient estimation. The time-invariant scale coefficients can be simply estimated using regular least-squares methods, and then the original time-varying physical parameters can be reconstructed by using the identified time-invariant scale coefficients. To reduce the influence of the ill-posed problem of equation resolving caused by noise, the Tikhonov regularization method instead of regular least-squares method is used in the paper to estimate the scale coefficients. A two-story shear type frame structure with time-varying stiffness and damping are simulated to validate the effectiveness and accuracy of the proposed method. It is demonstrated that the identified time-varying stiffness is with a good accuracy, while the identified damping is sensitive to noise.

• Communications for Statistical Applications and Methods
• /
• 제16권6호
• /
• pp.891-901
• /
• 2009

이 논문에서는 GARCH 모형에서 가정한 오차향의 분포에 근접하도록 자료를 변환하고 변환된 자료를 이용하여 모수와 예측구간을 구한 후 다시 역변환을 통해 원래의 척도에서의 VaR을 계산하는 방법에 대해 알아본다. KOSPI와 KOSDAQ 수익률을 이동시키며 VaR을 계산하고 이들 VaR의 포함확률을 계산하여 병목수준에 얼마나 근접하는지를 알아봄으로써 변환-역변환 방법과 변환을 적용하지 않는 방법의 결과를 비교해 본다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 Ⅳ
• /
• pp.2451-2454
• /
• 2003

In this paper, we propose the computation reduction methods of LSP(Line spectrum pairs) transformation that is mainly used in CELP vocoders. In order to decrease the computational time in real root method the characteristic of four proposed algorithms is as the following. First, scheme to reduce the LSP transformation time uses met scale. Developed the second scheme is the control of searching order by the distribution characteristic of LSP parameters. Third, scheme to reduce the LSP transformation time uses voice characteristics. Developed the fourth scheme is the control of searching interval and order by the distribution characteristic of LSP parameters. As a result of searching time, computational amount, transformed LSP parameters, SNR, MOS test, waveform of synthesized speech, speech, spectrogram analysis, searching time reduced about 37.5％, 46.21％, 46.3％, 51.29％ in average, computational amount is reduced about 44.76％, 49.44％, 47.03％, 57.40％. But the transformed LSP parameters of the proposed methods were the same as those of real root method.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2010년도 춘계학술발표논문집 1부
• /
• pp.257-260
• /
• 2010

In this paper, we propose the computation reduction methods of LSP(Line spectrum pairs) transformation that is mainly used in CELP vocoders. In order to decrease the computational time in real root method the characteristic of four proposed algorithms is as the following. First, scheme to reduce the LSP transformation time uses mel scale. Developed the second scheme is the control of searching order by the distribution characteristic of LSP parameters. Third, scheme to reduce the LSP transformation time uses voice characteristics. Developed the fourth scheme is the control of searching interval and order by the distribution characteristic of LSP parameters. As a result of searching time, computational amount, transformed LSP parameters, SNR, MOS test, waveform of synthesized speech, spectrogram analysis, searching time is reduced about 37.5%, 46.21%, 46.3%, 51.29% in average, computational amount is reduced about 44.76%, 49.44%, 47.03%, 57.40%. But the transformed LSP parameters of the proposed methods were the same as those of real root method.

• Journal of Mechanical Science and Technology
• /
• 제17권2호
• /
• pp.197-206
• /
• 2003

It is intended to retrieve the time history of displacement from measured acceleration signal. In this study, the word retrieving means reconstructing the time history of original displacement signal from already measured acceleration signal not just extracting various information using relevant signal processing techniques. Unlike extracting required information from the signal, there are not many options to apply to retrieve the time history of displacement signal, once the acceleration signal is measured and recorded with given sampling rate. There are two methods, in general, to convert measured acceleration signal into displacement signal. One is directly integrating the acceleration signal in time domain. The other is dividing the Fourier transformed acceleration signal by the scale factor of - $\omega$$^2$and taking the inverse Fourier transform of it. It turned out both the methods produced a significant amount of errors depending on the sampling resolution in time and frequency domain when digitizing the acceleration signals. A simple and effective way to convert the time history of acceleration signal into the time history of displacement signal without significant errors is studied here with the analysis on the errors involved in the conversion process.

• 한국농공학회지
• /
• 제30권4호
• /
• pp.134-153
• /
• 1988

This paper was carried out to investigate the existence of a unique stress- strain behavior by obtaining some factors influencing the time dependent stress- strain behavior of clay. The results obtained from this study were summarized as follows ; 1. The relationship between stress ratro and strain in normally consolidated clay was in- dependent on pre-shear consolidation pressure. Therefore, shear strain could be expressed as a function with stress ratio. 2. The constitutive equation of shear strain on Modified Carn Clay Model coincided better with the observed value than Cam Clay Model. 3. The relationships between deviator stress and shear strain, between pore water pressure and shear strain were unified by the mean equivalent pressure. 4. The shear strain contour in norrnally consolidated clay was increased linearly through origin, but that in overconsolidated clay was not in accordance with the result of the former. 5. Because the effective stress path of normally consolidated clay was unified by the mean equivalent pressure, state boundary surface in (e,p,q) space was transformed into two dimensional surface. But it was considered to be suitable that the unified stress- strain in overconsolidated clay be expressed by a function with overconsolidation ratio. 6. The deviator for constant strain was increased linearly with increment of strain rate ($\varepsilon$) on semi-log scale, but pore water pressure was decreased. 7. The behavior of stress relaxation was transformed from linear to curvilinear with inc - rement of strain rate before stress relaxation test, and pore water pressure was increased in total range. 8. The strain of creep was increased linearly with increment of time on semi-log scale. The greater the strain rate before creep test became, the greater the increment of strain of creep became. And the pore water pressure during creep test was increased generally with increment of time on semi-log scale.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 제13회 신호처리 합동 학술대회 논문집
• /
• pp.157-160
• /
• 2000

In the generally a voice conversion has used VQ(Vector Quantization) for partitioning the spectral feature and has performed by adding an appropriate offset vector to the source speaker's spectral vector. But there is not represented the target speaker's various characteristics because of discrete characteristics of transformed parameter. In this paper, these problems are solved by using the LMR(Linear Multivariate Regression) instead of the mapping codebook which is determined to the relationship of source and target speaker vocal tract characteristics. Also we propose the method for solved the discontinuity which is caused by applying to time aligned parameters using Dynamic Time Warping the time or pitch-scale modified speech. In our proposed algorithm for overcoming the transitional discontinuities, first of all, we don't change time or pitch scale and by using the LMR change a speaker's vocal tract characteristics in speech with non-modified time or pitch. Compared to existed methods based on VQ and LMR, we have much better voice quality in the result of the proposed algorithm.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1262-1269
• /
• 2003

In structural optimization, static loads are generally utilized although real external forces are dynamic. Dynamic loads have been considered in only small-scale problems. Recently, an algorithm for dynamic response optimization using transformation of dynamic loads into equivalent static loads has been proposed. The transformation is conducted to match the displacement fields from dynamic and static analyses. The algorithm can be applied to large-scale problems. However, the application has been limited to size optimization. The present study applies the algorithm to shape optimization. Because the number of degrees of freedom of finite element models is usually very large in shape optimization, it is difficult to conduct dynamic response optimization with the conventional methods that directly threat dynamic response in the time domain. The optimization process is carried out via interfacing an optimization system and an analysis system for structural dynamics. Various examples are solved to verify the algorithm. The results are compared to the results from static loads. It is found that the algorithm using static loads transformed from dynamic loads based on displacement is valid even for very large-scale problems such as shape optimization.

• 대한기계학회논문집A
• /
• 제27권8호
• /
• pp.1363-1370
• /
• 2003

In structural optimization, static loads are generally utilized although real external forces are dynamic. Dynamic loads have been considered in only small-scale problems. Recently, an algorithm for dynamic response optimization using transformation of dynamic loads into equivalent static loads has been proposed. The transformation is conducted to match the displacement fields from dynamic and static analyses. The algorithm can be applied to large-scale problems. However, the application has been limited to size optimization. The present study applies the algorithm to shape optimization. Because the number of degrees of freedom of finite element models is usually very large in shape optimization, it is difficult to conduct dynamic response optimization with the conventional methods that directly threat dynamic response in the time domain. The optimization process is carried out via interfacing an optimization system and an analysis system for structural dynamics. Various examples are solved to verify the algorithm. The results are compared to the results from static loads. It is found that the algorithm using static loads transformed from dynamic loads based on displacement is valid even for very large-scale problems such as shape optimization.