• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1976.06a
• /
• pp.87.1-87
• /
• 1976

Bekesy measured the sound transformation system of the middle ear 49 years ago. According to his reports, a ratio between the size of ear drum and the size of oval window is 17 : 1, and the lever function of the ossicles is physiologically 1.3 : 1. Therefore, the hearing might be aggravated to 27.5㏈ in the case of the vanishment of 3 ossicles. In 1952, Wullstein reported 5 types of tympanop-lasty and the fourth type among them was especially named for the sound-protection. The oval window is only exposed by the sound pressure and the round window is not exposed. According to the application by this idea, the post-operative hearing might be improved until 27.5㏈. Mean while, in 1942, Onchi verified through his experiment that the results of Bekesy's measurement was not completely conformed to Onchi result. Bekesy measured the sound pressure on the stapes plate of the oval window, on the other hand, Onchi measured the sound pressure on the surface of the perilymph of the oval window after removing the stapes plate(Fig. 1).(Figure omitted) The difference of their experiment is recognized that the impedance of the stapes plate exists or not (Fig. 1). Both Audiogrums are compared as Fig. 2. The result of IV type of tympanoplasty is success ful in 54% as the Table 1. (Table Omitted) The reason of unsatisfactory is caused by the thick and unmovable window-membrane and by the closing of air passage to the round window. The closing of the air passage to the round window is occurred by the adhesion between the grafting membrane and the surface of promontorium. In order to preserve this adhesion, I produce to transplantate the mucous membrane of the lip to the bone surface of tympanic cavity after removing the granulation tissue of the tympanic cavity and to form a membranous canal for the sake of air passage (Fig. 3). (Figure Omitted) The post-operative hearing by this method is shown as Fig. 4, 5. In other words, the post-operative sound pressure entered into the cochlea directly, by way of the oval window only, not by way of the round window, as a theorie of the sound protection. (Figure omitted)

• Nuclear Engineering and Technology
• /
• v.52 no.5
• /
• pp.1013-1021
• /
• 2020

A combination of simultaneous thermal analysis, evolved gas analysis and non-ambient XRD techniques was used to characterise and investigate the conversion reactions of ammonium uranates into uranium oxides. Two solid phases of the ternary system NH₃ - UO₃ - H₂O were synthesised under specified conditions. Microspheres prepared by the sol-gel method via internal gelation were identified as 3UO₃·2NH₃·4H₂O, whereas the product of a typical ammonium diuranate precipitation reaction was associated to the composition 3UO₃·NH₃·5H₂O. The thermal decomposition profile of both compounds in air feature distinct reaction steps towards the conversion to U₃O₈, owing to the successive release of water and ammonia molecules. Both compounds are converted into α-U₃O₈ above 550 ℃, but the crystallographic transition occurs differently. In compound 3UO₃·NH₃·5H₂O (ADU) the transformation occurs via the crystalline β-UO₃ phase, whereas in compound 3UO₃·2NH₃·4H₂O (microspheres) an amorphous UO₃ intermediate was observed. The new insights obtained on these uranate systems improve the information base for designing and synthesising minor actinide-containing target materials in future applications.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.11
• /
• pp.85-92
• /
• 2021

In this paper, a method for effectively detecting rotated face and rotation angle regardless of the rotation angle is proposed. Rotated face detection is a challenging task, due to the large variation in facial appearance. In the proposed polar coordinate transformation, the spatial information of the facial components is maintained regardless of the rotation angle, so there is no variation in facial appearance due to rotation. Accordingly, features such as HOG, which are used for frontal face detection without rotation but have rotation-sensitive characteristics, can be effectively used in detecting rotated face. Only the training data in the frontal face is needed. The HOG feature obtained from the polar coordinate transformed images is learned using SVM and rotated faces are detected. Experiments on 3600 rotated face images show a rotation angle detection rate of 97.94%. Furthermore, the positions and rotation angles of the rotated faces are accurately detected from images with a background including multiple rotated faces.

• International Journal of Advanced Culture Technology
• /
• v.9 no.3
• /
• pp.253-258
• /
• 2021

This study aims to expose the potential dangers of K-pop through the past and present of K-pop choreography copyrights and to suggest the need to secure digital choreography copyrights for the sustainability of K-pop considering national responsibility. As the content industry quickly sought countermeasures to digital transformation, such as the launch of K-pop platforms and the evolution of OMO (Online Merges with Offline) media commerce in response to changes in the industrial environment due to COVID-19, the annual export of the domestic content industry increased by 6.3% compared to the previous year. Accordingly, our copyright does not require that works be fixed in tangibles, as in Japan and Germany, on the basis of entrusting each country's legislation to determine whether to require fixation on choreographed works. On the other hand, the United States, France and the United Kingdom are demanding that it be fixed. Although choreography is at the center of K-pop and the value and influence of K-pop videos including cover dance through new media are discussed from various perspectives, copyright on choreography that needs to be resolved in business platforms for K-pop scalability The fact that there is such a big difference in problem perception is an area where we must not lose our vigilance. As the development of today's technology, the method of fixing a choreography looks very easy as an image, but at the same time can be stolen very quickly. Therefore, compared to overseas cases, it is urgent to improve the difference in perception of copyright registration for K-pop choreography and to supplement the system include the NFT.

• Metals and materials international
• /
• v.24 no.6
• /
• pp.1193-1201
• /
• 2018

Dilatometry is a useful technique to obtain experimental data concerning transformation. In this paper, a dilation conversional model was established to calculate carbides fraction in AISI H13 hot-work tool steel based on the measured length changes. After carbides precipitation, the alloy contents in the matrix changed. In the usual models, the content of carbon atoms after precipitation is considered as the only element that affects the lattice constant and the content of the alloy elements such as Cr, Mo, Mn, V are often ignored. In the model introduced in this paper, the alloying elements (Cr, Mo, Mn, V) changes caused by carbides precipitation are incorporated. The carbides were identified using scanning electron microscope and transmission electron microscope. The relationship between lattice constant of carbides and temperature are measured by high-temperature X-ray diffraction. The results indicate that the carbides observed in all specimens cooled at different rates are V-rich MC and Cr-rich $M_{23}C_6$, and most of them are V-rich MC, only very few are Cr-rich $M_{23}C_6$. The model including the effects of substitutional alloying elements shows a good improvement on carbides fraction predictions. In addition, lower cooling rate advances the carbides precipitation for AISI H13 specimens. The results between experiments and mathematical model agree well.

• Applied Chemistry for Engineering
• /
• v.30 no.1
• /
• pp.49-53
• /
• 2019

Hydrous $MnO_2$ nanowires were easily synthesized by an one-pot synthesis with a simple hydrothermal method. As prepared hydrous $MnO_2$ nanowires were characterized with scanning emission microscopy (SEM), transmit emission microscopy (TEM), X-ray diffraction (XRD), and Brunauer-Emmett-Teller (BET). They showed a good catalytic activity with the suitable nano-size of 4-5 nm and morphology. The furfuryl alcohol was selected as a substrate and the reaction was carried out in a toluene solvent at $100^{\circ}C$ under the atmospheric pressure of oxygen. The hydrous $MnO_2$ nanowire catalyst exhibited an excellent yield of furfural with the first-rate selectivity and conversion. The catalytic performance during recycle tests was also carried out and the catalyst showed a good mechanical strength with a negligible loss in the activity over five reaction cycles.

• Journal of the Korean Geotechnical Society
• /
• v.35 no.3
• /
• pp.37-46
• /
• 2019

Recently, the use of CPT-based liquefaction assessment method has increased by providing more accurate results than other field tests. In CPT-based liquefaction evaluation, various soil properties are predicted and they are used for liquefaction potential assessment. In particular, fines content is one of the important input parameters in CPT-based liquefaction assessment, so it is very important to use correct prediction model and to make quantitative evaluation of estimating variability of fines content. In this study, the error evaluation of existing models for prediction of fines content through CPT was performed, and the most suitable model was selected for Pohang area, where the liquefaction phenomenon was observed in the 2017. In addition, the inherent variability of soil was analyzed, and the estimating variability of fines content was evaluated quantitatively considering the inherent variability of soil, measurement error of CPT and transformation uncertainty of selected model.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.10
• /
• pp.115-126
• /
• 2019

Existing buildings in urban parks are a kind of thing that has been settled and occupied on the site of an unexecuted park. The aim of this study is to identify nature by analyzing the causality and path-dependency through the transformation of the relevant system. The scope of the study was set up as a system for the occupancy of urban parks from 1934 when the building restriction system was established to 2000 when purchase claim (매수청구권) was introduced. The method of study was to get correlation by harmonizing the external and internal mechanisms affecting the relevant institution. The related system showed a modest change in the fourth stage, polymerizing the initial system. In the 1950s and 1960s, the existing buildings in urban parks were 'disguised' by government and the 'regulation' principle was applied since 1967. In the 1980s, the principle of 'protection' and 'support' for parks was added, but in the 1990s, the principle of regulation began to be lifted as the long-term unexecuted urban park (장기미집행 도시공원) problem continued for more than 60 years. Although the public concept of land ownership (토지공개념) has worked strongly for nearly 30 years since 1960, the system has developed into a form of deregulation since 1980. The nature of the relevant institution is first, dependent on the higher-level system and vertical. Second, it implies a conflict of restrictions and acceptance. Third, it is a temporary measure of the park problem. Therefore, the relevant system has long been enhancing the encroachment requirements on urban parks, so fundamental readjustment is needed in the future.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.10
• /
• pp.1280-1287
• /
• 2020

This paper proposes a vision-based food recognition method for automated production of custom cakes. A small camera module mounted on a food art printer recognizes objects' shape and estimates their center points through image processing. Through the perspective transformation, the top-view image is obtained from the original image taken at an oblique position. The line and circular hough transformations are applied to recognize square and circular shapes respectively. In addition, the center of gravity of each figure are accurately detected in units of pixels. The test results show that the shape recognition rate is more than 98.75% under 180 ~ 250 lux of light and the positioning error rate is less than 0.87% under 50 ~ 120 lux. These values sufficiently meet the needs of the corresponding market. In addition, the processing delay is also less than 0.5 seconds per frame, so the proposed algorithm is suitable for commercial purpose.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.4
• /
• pp.603-610
• /
• 2021

In this paper, we extract the user's power consumption patterns, and model the optimal consumption patterns by applying the user's environment and emotion. Based on the comparative analysis of these two patterns, we present an efficient power consumption method through changes in the user's power consumption behavior. To extract significant consumption patterns, vector standardization and binary data transformation methods are used, and learning about the ensemble's ensemble with k-means clustering is applied, and applying the support factor according to the value of k. The optimal power consumption pattern model is generated by applying forced and emotion-based control based on the learning results for ensemble aggregates with relatively low average consumption. Through experiments, we validate that it can be applied to a variety of windows through the number or size adjustment of clusters to enable forced and emotion-based control according to the user's intentions by identifying the correlation between the number of clusters and the consistency ratios.