• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2000년도 춘계학술대회논문집
• /
• pp.75-81
• /
• 2000

Water waves propagate over irregular bottom bathymetry are transformed by refraction, diffraction, shoaling, reflection etc. Principal factor of wave transform is bottom bathymetry, but in case of current field, current is another important factor which effect wave transformation. The governing equation of this study is develop as wave-current equation type to investigate the effect of wave-current interaction. This wave-current model was applied to the Kwangan beach which is located at Pusan. The numerical simulation results of this model show the characteristics of wave transformation and flow pattern around the Kwangan beach fairly well.

• Journal of Electrical Engineering and Technology
• /
• 제2권4호
• /
• pp.500-504
• /
• 2007

In this paper, the induction motor rotor fault diagnosis system using current signals, which are measured using axis-transformation method, and speed, which is estimated using current information, are presented. In inverter-fed motor drives unlike line-driven motor drives the stator currents have numerous harmonics components and therefore fault diagnosis using stator currents is very difficult. The current and speed signal for rotor fault diagnosis needs to be precise. Also, high resolution information, which means the diagnosis system, demands additional hardware such as low pass filter, high resolution ADC, encoder and etc. Therefore, the proposed axis-transformation and speed estimation method are expected to contribute to low cost fault diagnosis systems in inverter-fed motor drives without the need for an encoder and any additional hardware. In order to confirm validity of the developed algorithms, various experiments for rotor faults are tested and the line current spectrum of each faulty situation using Park transformation and speed estimation method are compared with the results obtained from fast Fourier transforms.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.964-968
• /
• 1996

The demands of size and quality of large steel shaft forgings for ship building, power plant, steel plant, etc. are rapidly increasing, and some of these productions are manufactured from ingot weighing more than 300 tons. For use as rotating components. shafts require toughness, strength and homogeneity, and therefore are produced through a variety of heat treatments. According to the increase of ingot size, micro- and macrosegregation and also mass effect of the product increase. Thus, special care should be paid to the heat treatment of such large shaft forgings. In this paper, the heat treatment of large shaft forgings such as rotor and back-up roll is calculated using the commercial finite element code SYSWELD. Calculated distributions of temperature and phase are compared with experimental data. The continuous cooling transformation diagram, thermal and mechanical properites of each phase are used. The phase proportion, hardness and residual stress during water quenching are discussed.

• 한국해양공학회지
• /
• 제15권2호
• /
• pp.6-10
• /
• 2001

Water waves propagate over irregular bottom bathymetry are transformed by refraction, diffraction, shoaling, reflection etc. Principal factor of wave transform is bottom bathymetry, but in case of current field, current is another important factor which effect wave transformation. The governing equation of this study is develope as wave-current equation type to investigate the effect of wave-current interaction. It starts from Berkhoff's(1972) mild slope equation and is transformed to time-dependent hyperbolic type equation by using variational principal. Finally the governing equation is shown as a parabolic type equation by splitting method. This wave-current model was applied to the kwangan beach which is located at Pusan. The numerical simulation results of this model show the characteristics of wave transformation and flow pattern around the Kwangan beach fairly well.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1999년도 추계학술대회논문집
• /
• pp.235-242
• /
• 1999

Wave which propagate from the offshore cause transformation of diffraction, refraction, and reflection etc. in coming in the coastal by depth change. Especially, Wave strongly show the charcateristics of rancom wave in the coastal zone. Developed wave model until a recent date analysed regular waves with height and period equal to those of the significant wave, In case of Monochromatic wave, it can be analysed fine in the offshore, but differ from in coastal zone. In this study, form of governing equation is parabolic mild slope equation. This model calculated random wave for using frequency spectrum and directional spectrum from input data condition of wave. This model is applied to Vincent shoal and compared with laboratory experimental data. The results agreed well with laboratory data.

• 디지털융복합연구
• /
• 제19권2호
• /
• pp.195-202
• /
• 2021

본 연구에서는 장기적 관점에서 지적좌표 세계측지계 변환성과를 도해 및 수치지역의 지적공부에 단계적으로 적용·활용하기 위한 방안을 제시하고자 하였다. 현재 추진되고 있는 지적좌표의 세계측지계 변환성과는 변환 전후 면적의 차이가 불규칙적으로 발생하고 있는 사례가 있었다. 또한 지적불부합 지역의 변환 오차의 누적 및 지적기준점에 대한 세계측지계 성과취득 기간이 부족한 것으로 나타났다. 연구에서는 이러한 문제의 해결을 위해, 2020년말까지 1차적으로 세계측지계 변환이 완료된 도면에 대해서는 연속지적도 등의 고도화를 통해 공간정보 및 관련 분야에 제공하는 방안을 제시하였다. 그리고 지적측량 목적으로 사용되는 도면은 도해지역과 수치지역의 특성에 부합하도록 장기적으로 수치형태로 지적공부에 적용하는 방향으로 개선방안을 제시하였다. 세계측지계 변환성과를 도해 및 수치지역을 구분해 적용 및 활용함으로써 보다 안정적인 지적공부의 반영이 기대된다.

• 전자공학회논문지
• /
• 제51권6호
• /
• pp.117-123
• /
• 2014

본 논문에서는 기저변환을 사용하여 효율적인 곱셈기를 구성하는 방법을 제안하였다. 제안한 곱셈기는 두 입력부분 중 한 입력을 듀얼기저로 변환하는 표준-듀얼 기저 변환회로 모듈과 주어진 m차 기약다항식에 의해 $b_m$부터 $b_{m+k}$를 발생시키는 $b_{m+k}$차 발생연산모듈, $m^2$개의 AND 게이트와 m(m-1)개의 EX-OR 게이트로 구성되는 다항식 승산모듈로 구성된다. 또한, 듀얼기저로 표현되는 출력부분을 표준기저로 변화시켜주는 듀얼-표준 기저 변환회로 모듈로 구성되며, 각 연산부의 구성에 필요한 기본 연산모듈을 정의하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제13권2호
• /
• pp.78-88
• /
• 1989

The fundamental objective of this paper has been to develop a means for incoporating the concept of the linear fractional transformation more generally and easily into multivariable feedback design procedure. When we design a continuous system, generally, we are constrained by design methods which arise specifically for the system. Also, in the design of descrete systems, it is the same concept. But the approach developed in this paper is very flexible in the view that in spite of being the continuous or discrete, the design can be done using a well known design method in both cases. That is, when we design a contnuous system or discrete system, the design can be done by a standard design method of continuous systmes or discrete ones, depending on the choice of the linear fractional transformation. Therefore, it is noted that this concept has broken the unflexibility of the conventional design rules for multivariable control system. In essence, the concept shows that if a given system is controllable, some desirable design, for examples, pole assignment within prespecified region, optimal controllers with poles within prespecified region etc., could be done easily by transforming a desirable region into a standard region, such as the complex left-half plane or the unit disk, by the chosen linear fractional transformation, and then by designing the transformed system using the well known standard results.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권8호
• /
• pp.3981-4004
• /
• 2019

This paper proposes a novel method for locating objects in real space from a single remote image and measuring actual distances between them by automatic detection and perspective transformation. The dimensions of the real space are known in advance. First, the corner points of the interested region are detected from an image using deep learning. Then, based on the corner points, the region of interest (ROI) is extracted and made proportional to real space by applying warp-perspective transformation. Finally, the objects are detected and mapped to the real-world location. Removing distortion from the image using camera calibration improves the accuracy in most of the cases. The deep learning framework Darknet is used for detection, and necessary modifications are made to integrate perspective transformation, camera calibration, un-distortion, etc. Experiments are performed with two types of cameras, one with barrel and the other with pincushion distortions. The results show that the difference between calculated distances and measured on real space with measurement tapes are very small; approximately 1 cm on an average. Furthermore, automatic corner detection allows the system to be used with any type of camera that has a fixed pose or in motion; using more points significantly enhances the accuracy of real-world mapping even without camera calibration. Perspective transformation also increases the object detection efficiency by making unified sizes of all objects.

• 대한건축학회논문집:계획계
• /
• 제34권10호
• /
• pp.45-54
• /
• 2018

The purpose of the research is to track the morphological transformation of apartment complex sites in Busan, especially focusing on building arrangement on apartment complex sites. Though there have been numerous studies regarding apartment housing, only few studies have been performed about the building arrangement. The arrangement has been poorly treated and not well disclosed as compared with other apartment-based research such as form of residential towers, floor plan, etc. The building arrangement is one of the most critical decisions at the early design stage and is affected by numerous social aspects such as building/zoning code, market demand, cultural preference, etc. Thus, the transformation of the arrangement may provide the hint for the change of socio-cultural demands of apartment housing. The research has been done on the existing 269 apartment complexes which have been built through 2016 in Busan. There are three categories set for analysis: relationship between buildings, relation between road and buildings, and the building arrangement along site perimeter. The result shows that significant change has occurred since 2000s; the arrangement has become diverse from three types to seven types. The early model of parallel or lattice types have been dominant until 2000, but the skewed one replaced the parallel or lattice types in Period V and Period VI, which is from 2001 through 2016.