• 사회복지연구
• /
• 제36호
• /
• pp.55-80
• /
• 2008

이 연구는 기혼여성의 경제적 의존 수준을 국가 비교를 통해 분석함으로써, 그동안 많은 복지국가 및 소득불평등 연구에서 간과해 온 가족 내(within a family) 불균등한 권력관계를 검토하였다. 기혼여성의 경제적 의존은 가구 내에서, 그리고 전체 사회 내에서 여성들이 열악한 지위에 놓여 있게 하는 원인으로 작용한다. 가족 내 부부의 소득의 비중을 이용한 Sørensen & McLanahan(1987)의 의존 지수(Dependency Index)를 OECD 16개 국가에 대해 도출하였다. 분석 자료는 가구 내 남편과 부인 각각의 소득에 관한 정보를 제공하는 룩셈부르크 소득조사(LIS) Wave V(2000년 전후 시점)이다. 이 지수는 노동시장 참여여부, 노동시간, 임금수준을 종합적으로 고려하였다. 의존 지수는 배우자 중 한 명이 노동시장에 참여하지 않는 경우를 포함한 모든 부부를 대상으로 했을 때와 맞벌이 부부만을 포함했을 때로 구분하여 도출하였다. 분석 결과, 모든 부부를 대상으로 했을 때 의존 지수값은 스칸디나비아 국가들이 가장 낮게 나타났다. 이는 이들 국가의 높은 경제활동 참가율에 기인한다고 할 수 있다. 7세 미만 자녀가 있을 경우 기혼여성의 경제적 의존 상황은 더욱 악화되는데, 국가마다 상당한 정도의 차이가 존재하는 것으로 나타났다. 맞벌이 부부를 대상으로 한 의존 지수값의 경우, 앞의 결과와 비교하여 대부분의 국가에서 의존 지수값이 작아졌고 국가 간 편차가 다소 줄어들었다. 여성 파트타임 고용률이 높은 국가들의 경우, 여전히 의존 수준이 높게 나타나 기혼여성의 노동시장 참여가 반드시 맞벌이 가구에서의 경제적 권력관계를 변화시키는 것은 아님을 보여주었다. 마지막으로, 기혼여성의 경제적 독립수준이 높아지는데 필요한 정치 경제 제도적 조건에 대한 분석을 실시하였다. Ragin(2000)의 퍼지셋 질적비교분석(FSQCA)방법을 사용하여 필요충분조건 분석을 실시한 결과, 강력한 노동운동의 영향력, 높은 수준의 공공 부문 고용창출, 관대한 가족지원 조건이 기혼여성의 경제적 독립성에 필요한 조건임이 검증되었다.

• 헤리티지:역사와 과학
• /
• 제52권3호
• /
• pp.56-73
• /
• 2019

본 논문은 동아시아 지역의 기와 제작 기술을 관찰함으로써 기술 양식에 대한 본격적인 논의의 필요성을 제시하려는 목적에서 작성되었다. 연구 방법은 기존의 주된 연구 자료인 발굴 성과와 그에 따른 연구방법론인 제작 흔적 분석뿐만 아니라 문헌과 전승 기술 등을 함께 살피려 노력했다. 공정 단위마다 지역별 유사성으로 기술의 권역을 설정하는 작업을 통해 도구, 공정, 인원 편성 등 기술적 요인을 중심으로 접근했다. 따라서 본고는 선행 연구 성과 토대 위에서 기술양식의 파악이 형태뿐만 아니라 문화 교류에 따른 기술의 인과성을 파악할 텍스트로서 작용 가능한지를 논증하는 실험이며, 이러한 논의를 추동하기 위한 시론(始論)이라 할 수 있다. 한국과 중국, 일본 세 나라의 기술 보유 지역을 네 개로 나누어 기와 제작 도구 및 공정을 분석하였다. 토형제작-기와성형-건정 세 공정을 주된 분석 대상으로 삼았으며 한국을 중심으로 주변 지역을 살펴보는 방식으로 진행하였다. 표면적인 현상으로는 양자강 이남과 오키나와가, 한반도 남방과 혼슈 지방이 유사한 기술의 맥을 공유하고 있었다. 그러나 제작 도구와 그에 따른 세부 공정을 유물, 교류관계와 함께 관찰하였을 때, 기와 제작 기술은 지역마다의 특수성만으로 구분할 수 있는 것이 아니었다. 공정별 세부 기법과 인원 편성 관찰은 공정 단위마다 다양한 권역 설정을 가능하게 했으며, 각 권역의 특색이 나타나는 원인과 그에 따른 결과를 추정할 단서를 제공했다. 이를 통해 각 지역의 기술적 특징을 상호 비교하고 그에 대한 원인 규명을 시도하였다. '편절 기법'은 지역이 보유한 기법에 따라서 권역은 구분되었지만, 규구준승(規矩準繩)에 따른 건축 기술에 기반한 기법이었다. 특히 타 지역들과는 다르게 중국을 중심으로 한 중 일만이 공유하던 특수하고도 고유한 제작 기법이었던 것으로 파악되었다. 또한 '타날 기법'은 기술이 전파되고 토착화되면서 다양한 방식으로 분화되는 양상을 드러냈다. 이러한 변화 양상은 기술의 문화적 다변성과 보수성을 관찰할 수 있는 기회가 되었다.

• 지능정보연구
• /
• 제25권3호
• /
• pp.1-17
• /
• 2019

빅데이터 시대에 정보의 양이 급증하고, 그중 많은 부분을 차지하는 문자열 정보를 정량화하여 의미를 찾아 낼 수 있는 인공지능 방법론이 함께 발전하면서, 텍스트 마이닝을 통해 주가 예측에 적용해 온라인 뉴스로 주가를 예측하려는 시도가 다양해지고 있다. 이러한 주가 예측의 방법은 대개 예측하고자 하는 기업의 뉴스로 주가를 예측하는 방식이다. 하지만 특정 회사의 뉴스만이 그 회사의 주가에 영향을 주는 것이 아니라, 그 회사와 관련성이 높은 회사들의 뉴스 또한 주가에 영향을 줄 수 있다. 그러나 관련성이 높은 기업을 찾는 것은 시장 전반의 공통적인 영향과 무작위 신호 때문에 쉽지 않다. 따라서 기존 연구들은 주로 미리 정해진 국제 산업 분류 표준에 기반을 둬 관련성이 높은 기업을 찾았다. 하지만 최근 연구에 따르면, 국제 산업 분류 표준은 섹터에 따라 동질성이 다르며, 동질성이 낮은 섹터는 그들을 모두 함께 고려하여 주가를 예측하는 것이 성능에 악영향을 줄 수 있다는 한계점을 가진다. 이러한 한계점을 극복하기 위해, 본 논문에서는 주가 예측 연구에서 처음으로 경제물리학에서 주로 사용되는 무작위 행렬 이론을 사용하여 시장 전반 효과와 무작위 신호를 제거하고 군집 분석을 시행하여 관련성이 높은 회사를 찾는 방법을 제시하였다. 또한, 이를 기반으로 관련성이 높은 회사의 뉴스를 함께 고려하며 다중 커널 학습을 사용하는 인공지능 모형을 제시한다. 본 논문의 결과는 무작위 행렬 이론을 통해 시장 전반의 효과와 무작위 신호를 제거하여 정확한 상관 계수를 찾아 군집 분석을 시행한다면 기존 연구보다 더 좋은 성능을 보여 준다는 것을 보여준다.

• 기록학연구
• /
• 제54호
• /
• pp.111-150
• /
• 2017

이 논문은 아시아태평양전쟁 시기에 일본군 군속으로 배속된 한국인이 일본군포로수용소에서 연합군 포로에 대한 학대혐의로 전범이 된 한국인 BC급 전범문제에 대한 일본의 공문서관의 자료 현황을 파악하여 한일아카이브의 가능성을 모색한 글이다. 일본정부는 포츠담선언의 수락을 통해서 전쟁범죄에 대한 재판을 수락하였고, 연합군은 극동군사재판(동경재판)과 아시아 각 지역에서 BC급 전범 재판을 진행하였다. 하지만, 일본의 전범 재판속에는 일본인 전범만이 아닌 일본의 식민지 출신인 한국인 대만인도 다수가 전범으로 기소되었고, 이들의 명예회복 및 보상 및 배상 문제는 냉전기간 동안 한일양국정부에 의해서 방치된 상태였으며, 관련 자료의 공개도 한정되었다. 한국인 BC급 전범관련 기록은 국립공문서관이 각 성에서 이관되어 받은 자료가 대부분이고, 그 내용은 주로 연합국에 의한 전범 재판의 기록 복사본, 그리고 일본정부의 각 부처가 향후 독립된 이후 일본 전범의 명예회복을 위해서 준비한 종합정리 형태의 기록 등이 대부분이다. 외교사료관의 경우, 전범과 BC급 전범의 일본 국내 이송과 관련된 외교 현황이 주된 내용이고, 한국 및 대만 등의 경우, BC급 전범의 송환을 위한 협상의 자료들이 존재하고 있는 것으로 보인다. 반면, 아시아역사자료센터는 그 설립목적이나 활동내용을 보면, 한일간의 식민지관련 공동의 아카이브 구축을 위해서 활용도가 매우 높은 시설이라고 할 수 있다. 따라서 향후 한일식민지관련 아카이브구축에 있어서 아시아역사자료센터의 현재의 문제점들을 개선하여 공동 활용을 할 필요성이 있다고 할 수 있다.

• 벤처창업연구
• /
• 제14권2호
• /
• pp.221-233
• /
• 2019

우리나라의 중소기업은 전체 사업체 수의 99.8%, 종사자 비중의 87.8%, 전체 생산액의 48.4%를 차지하는 등 국가경제의 근간을 형성하고 있으며, 고용창출, 기술혁신, 산업의 다양성, 지역균형개발 등 여러 측면에서 국민경제 발전에 있어서 실질적인 원동력이 되고 있다. 이로 인해 중소기업은 기술혁신을 통해서 기술역량을 확보하는 것이 더욱더 필요해졌다. 하지만 대부분의 중소기업은 자금부담 능력은 물론 R&D인력, 연구장비 등 R&D 역량이 대체적으로 부족한 실정이다. 이에 정부에서는 중소기업 지원을 위해서 정부 출연(연)을 통해 다양한 정책적 지원을 강화하고 있다. 즉, 정부출연연구소는 산업 전반의 혁신활동을 증진시키고, 기업의 기술역량을 강화하기 위해 R&D를 통해 창출된 지식과 기술을 꾸준히 시장에 제공하고 있으며, 중소 중견기업이 견실한 기업으로 도약할 수 있도록 인력지원, 장비지원/연구시설 등을 통해 기업들을 지원하는 역할을 수행하고 있다. 특히 중소기업은 국민경제에서 차지하는 비중이 높을 뿐만 아니라 정치, 경제적인 면에서도 그 영향력이 커서 중소기업의 경쟁력 제고는 지속적인 경제 성장을 위해 반드시 달성해야 할 국가적인 주요 정책목표가 되고 있다. 이러한 이유로 중소기업의 경쟁력 제고를 위해 기업을 둘러싸고 있는 환경, 전략, 조직문화 등과 같은 추상화된 개념들 사이의 관계를 구체적으로 살펴볼 필요가 있다. 본 연구는 중소 벤처기업이 지속적인 경쟁력을 유지하기 위해 외부환경과 전략, 조직구조의 일치성(fit)을 추구할 때, 중소 벤처기업의 업종별, 영업형태별로 어떠한 조직문화가 기업성과(영업이익)에 유의미한 영향을 미치는지 알아보고자 665개 기업을 대상으로 실증분석을 하였다. 삼원분산분석(3-way ANOVA)을 통해 기업성과(영업이익)에 대한 중소 벤처기업의 업종, 영업형태, 조직문화의 주효과 및 상호작용효과를 검증한 결과, 중소 벤처기업의 업종은 통계적으로 유의미한 주효과가 있는 것으로 나타났으나, 영업형태와 조직문화는 유의미한 영향을 미치지 않는 것으로 나타났다. 또한 중소 벤처기업의 세 가지 독립변수 간의 상호작용효과를 분석한 결과, 업종, 영업형태, 조직문화 간에는 통계적으로 유의미한 상호작용효과가 있는 것으로 나타났다. 구체적으로 살펴보면, ICT 서비스의 경우, B2B 기업은 관계지향적 문화, B2C 기업은 위계지향적 문화, ICT 기기의 경우는 B2B와 B2C 기업 모두 과업지향적 문화에서 기업성과가 상대적으로 높게 나타났으며, SW 기타의 경우, B2B와 B2C 기업 모두 위계지향적 문화에서 기업성과가 상대적으로 높게 나타났다. 이는 기업의 업종과 영업형태별로 적합한 조직문화가 존재한다는 것을 보여주고 있어, 향후 중소 벤처기업의 육성 및 기업성과와 관련된 촉진정책을 수립할 때 의미 있는 기초자료로 활용될 것으로 기대된다.

• 대순사상논총
• /
• 제40집
• /
• pp.243-272
• /
• 2022

전라북도 정읍은 한국 사상사에서 주목을 요하는 지역이다. 또한 정읍은 문학사에서 '최초'를 기록한 작품이 많은 지역이다. 백제 노래 <정읍사>가 그렇고 조선시대 사대부 가사 <상춘곡>이 그렇다. 그리고 이 지역 태수를 지낸 최치원(857~?)의 선정과 풍류의 전통이 전해오는 고장이기도 하다. 이 논문에서는 정읍의 무성서원의 성립과정과 선비문화에 있어서 최치원의 연관성을 살펴보았다. 최치원이 임기를 마치고 떠날 때 고을 사람들이 선정에 보답하는 의미로 태산사라는 생사당을 건립하였고 그것이 근원이 되어 후대에 무성서원으로까지 이어졌다. 최치원은 자신의 포부와 역량을 정읍에서 실현하였다. 특히 조선중기 무성서원의 건립과 사액 과정에 최치원의 역할은 결정적이었기에 최치원은 이 지역의 상징적 인물로 되살아날 수가 있었다. 그리고 무성서원을 중심으로 영정의 이안(移安) 작업을 통해서 최치원의 형상도 보다 유학자, 유학적 선비의 모습으로 좌정해나가는 것도 볼 수가 있다. 최치원이 남긴 시문을 통해서도 유학적 선비(지식인)로서 자각을 읽을 수 있다. 그의 시세계가 다양하지만 특히 유학자 지식인으로서 현실에서 오는 시름과 고뇌, 비판적인 내면의식 등을 표출한 작품이 많은 수를 차지하고 있음을 볼 수 있다. 최치원은 남다른 포부와 각고의 노력으로 당대의 우뚝한 문사로서의 자질을 유감없이 발휘하기는 하였으나, 그 자신 주변국의 한 시인으로서의 지역적, 정신적 소외감을 극복하지 못했다. 따라서 세계인식 면에서의 치열성은 자연히 내면화될 수밖에 없었다. 그러나 그것이 오히려 그의 작품으로 하여금 강한 서정성을 가지게 한 요인이 되었던 것으로 보인다. 그리고 최치원의 문집에는 당대의 말기적 현상에서 초래된 다양한 형태의 병리적 현상을 강한 어조로 비판한 작품들이 다수 포함되어 있다. 그는 가난하고 곤고한 삶을 살아가는 민중들의 모습을 사실적으로 그려내는가 하면, 왜곡된 생산관계 속에서 결국 희생되고 마는 가련한 백성들의 삶의 실상을 형상화함으로써 당대의 잘못된 사회의 단면을 부각시키기도 했다. 이러한 것은 지식인으로서의 고뇌로 읽을 수 있다. 선비의 사전적 정의가 '학식과 인품을 갖춘 사람에 대한 호칭으로, 특히 유교이념을 구현하는 인격체 또는 신분계층을 가리키는 유교용어'이고, 오늘날 의미로는 '신분적 존재가 아니라 인격의 모범이요, 시대사회의 양심으로서 인간의 도덕성을 개인 내면에서나 사회질서 속에서 확립하는 원천으로 이해될 수 있다.'고 할 때, 최치원의 문학에서 고뇌하는 모습은 곧 선비(지식인)의 고뇌이고 '선비(士)'로서의 책무를 자각하였기에 나오는 반응이라고 할 수 있다. 그러한 점에서 최치원은 가장 이른 시기의 선비(지식인)의 원류라고 보아도 크게 잘못이 없을 것이다.

• Composites Research
• /
• 제36권1호
• /
• pp.1-15
• /
• 2023

미래모빌리티의 발전 기대에 따라 에너지 소비 절감에 대한 수요가 증가하고 있다. 경량구조용소재는 온실가스 배출 감소 및 에너지 효율 향상을 위한 방안으로 알려져 있다. 특히, 섬유강화복합재료(FRP, fiber reinforced polymer composite)는 뛰어난 기계적 특성 및 낮은 무게로 인해 기존 합금을 대체할 수 있는 소재로 주목받는다. 본 논문에서는, 탄소섬유강화복합재료(CFRP, carbon FRP) 및 자기강화복합재료(SRC, self-reinforced composite)의 산업 적용 및 연구 동향을 강화재, 고분자 매트릭스 및 공정에 기반하여 검토하였다. 항공분야에서 주로 활용되는 에폭시 수지 기반 오토클레이브 공법의 높은 공정단가 및 긴 제조시간을 극복하기 위하여, 속경화성 에폭시 수지를 이용한 고압수지이송성형 공정으로 CFRP가 적용된 전기자동차의 양산을 보고하였다. 또한, 탄소섬유복합재료의 재활용 이슈를 해결하기 위한 열가소성 수지 기반 CFRP 및 계면 향상 방안들이 재료 및 공정 측면에서 검토되었다. FRP의 우수한 기계적 특성을 유도하는 주요한 요인으로 알려진 완벽한 매트릭스-강화재 계면을 형성하기 위하여, 고분자 섬유에 동일한 매트릭스를 함침시킨 SRC에 대한 연구들이 보고되고 있다. 다양한 열가소성 고분자에 기초한 SRC의 물리적 및 기계적 특성들을 고분자 배향 및 복합재료 구조 측면에서 검토하였다. 또한, 고연 신 폴리프로필렌 섬유 기반 SRC의 공정창 확장을 위한 공중합체 매트릭스 전략이 논의되었다. 경량구조용소재의 CFRP 및 SRC 적용은 미래모빌리티의 에너지 효율 향상에 대한 잠재적인 선택을 제공할 수 있다.

• Asia pacific journal of information systems
• /
• 제18권3호
• /
• pp.123-145
• /
• 2008

Recently, as the information communication technology develops, the discussion regarding the ubiquitous environment is occurring in diverse perspectives. Ubiquitous environment is an environment that could transfer data through networks regardless of the physical space, virtual space, time or location. In order to realize the ubiquitous environment, the Pervasive Sensing technology that enables the recognition of users' data without the border between physical and virtual space is required. In addition, the latest and diversified technologies such as Context-Awareness technology are necessary to construct the context around the user by sharing the data accessed through the Pervasive Sensing technology and linkage technology that is to prevent information loss through the wired, wireless networking and database. Especially, Pervasive Sensing technology is taken as an essential technology that enables user oriented services by recognizing the needs of the users even before the users inquire. There are lots of characteristics of ubiquitous environment through the technologies mentioned above such as ubiquity, abundance of data, mutuality, high information density, individualization and customization. Among them, information density directs the accessible amount and quality of the information and it is stored in bulk with ensured quality through Pervasive Sensing technology. Using this, in the companies, the personalized contents(or information) providing became possible for a target customer. Most of all, there are an increasing number of researches with respect to recommender systems that provide what customers need even when the customers do not explicitly ask something for their needs. Recommender systems are well renowned for its affirmative effect that enlarges the selling opportunities and reduces the searching cost of customers since it finds and provides information according to the customers' traits and preference in advance, in a commerce environment. Recommender systems have proved its usability through several methodologies and experiments conducted upon many different fields from the mid-1990s. Most of the researches related with the recommender systems until now take the products or information of internet or mobile context as its object, but there is not enough research concerned with recommending adequate store to customers in a ubiquitous environment. It is possible to track customers' behaviors in a ubiquitous environment, the same way it is implemented in an online market space even when customers are purchasing in an offline marketplace. Unlike existing internet space, in ubiquitous environment, the interest toward the stores is increasing that provides information according to the traffic line of the customers. In other words, the same product can be purchased in several different stores and the preferred store can be different from the customers by personal preference such as traffic line between stores, location, atmosphere, quality, and price. Krulwich(1997) has developed Lifestyle Finder which recommends a product and a store by using the demographical information and purchasing information generated in the internet commerce. Also, Fano(1998) has created a Shopper's Eye which is an information proving system. The information regarding the closest store from the customers' present location is shown when the customer has sent a to-buy list, Sadeh(2003) developed MyCampus that recommends appropriate information and a store in accordance with the schedule saved in a customers' mobile. Moreover, Keegan and O'Hare(2004) came up with EasiShop that provides the suitable tore information including price, after service, and accessibility after analyzing the to-buy list and the current location of customers. However, Krulwich(1997) does not indicate the characteristics of physical space based on the online commerce context and Keegan and O'Hare(2004) only provides information about store related to a product, while Fano(1998) does not fully consider the relationship between the preference toward the stores and the store itself. The most recent research by Sedah(2003), experimented on campus by suggesting recommender systems that reflect situation and preference information besides the characteristics of the physical space. Yet, there is a potential problem since the researches are based on location and preference information of customers which is connected to the invasion of privacy. The primary beginning point of controversy is an invasion of privacy and individual information in a ubiquitous environment according to researches conducted by Al-Muhtadi(2002), Beresford and Stajano(2003), and Ren(2006). Additionally, individuals want to be left anonymous to protect their own personal information, mentioned in Srivastava(2000). Therefore, in this paper, we suggest a methodology to recommend stores in U-market on the basis of ubiquitous environment not using personal information in order to protect individual information and privacy. The main idea behind our suggested methodology is based on Feature Matrices model (FM model, Shahabi and Banaei-Kashani, 2003) that uses clusters of customers' similar transaction data, which is similar to the Collaborative Filtering. However unlike Collaborative Filtering, this methodology overcomes the problems of personal information and privacy since it is not aware of the customer, exactly who they are, The methodology is compared with single trait model(vector model) such as visitor logs, while looking at the actual improvements of the recommendation when the context information is used. It is not easy to find real U-market data, so we experimented with factual data from a real department store with context information. The recommendation procedure of U-market proposed in this paper is divided into four major phases. First phase is collecting and preprocessing data for analysis of shopping patterns of customers. The traits of shopping patterns are expressed as feature matrices of N dimension. On second phase, the similar shopping patterns are grouped into clusters and the representative pattern of each cluster is derived. The distance between shopping patterns is calculated by Projected Pure Euclidean Distance (Shahabi and Banaei-Kashani, 2003). Third phase finds a representative pattern that is similar to a target customer, and at the same time, the shopping information of the customer is traced and saved dynamically. Fourth, the next store is recommended based on the physical distance between stores of representative patterns and the present location of target customer. In this research, we have evaluated the accuracy of recommendation method based on a factual data derived from a department store. There are technological difficulties of tracking on a real-time basis so we extracted purchasing related information and we added on context information on each transaction. As a result, recommendation based on FM model that applies purchasing and context information is more stable and accurate compared to that of vector model. Additionally, we could find more precise recommendation result as more shopping information is accumulated. Realistically, because of the limitation of ubiquitous environment realization, we were not able to reflect on all different kinds of context but more explicit analysis is expected to be attainable in the future after practical system is embodied.

• Asia pacific journal of information systems
• /
• 제21권1호
• /
• pp.103-122
• /
• 2011

Recently, numerous documents have been made available electronically. Internet search engines and digital libraries commonly return query results containing hundreds or even thousands of documents. In this situation, it is virtually impossible for users to examine complete documents to determine whether they might be useful for them. For this reason, some on-line documents are accompanied by a list of keywords specified by the authors in an effort to guide the users by facilitating the filtering process. In this way, a set of keywords is often considered a condensed version of the whole document and therefore plays an important role for document retrieval, Web page retrieval, document clustering, summarization, text mining, and so on. Since many academic journals ask the authors to provide a list of five or six keywords on the first page of an article, keywords are most familiar in the context of journal articles. However, many other types of documents could not benefit from the use of keywords, including Web pages, email messages, news reports, magazine articles, and business papers. Although the potential benefit is large, the implementation itself is the obstacle; manually assigning keywords to all documents is a daunting task, or even impractical in that it is extremely tedious and time-consuming requiring a certain level of domain knowledge. Therefore, it is highly desirable to automate the keyword generation process. There are mainly two approaches to achieving this aim: keyword assignment approach and keyword extraction approach. Both approaches use machine learning methods and require, for training purposes, a set of documents with keywords already attached. In the former approach, there is a given set of vocabulary, and the aim is to match them to the texts. In other words, the keywords assignment approach seeks to select the words from a controlled vocabulary that best describes a document. Although this approach is domain dependent and is not easy to transfer and expand, it can generate implicit keywords that do not appear in a document. On the other hand, in the latter approach, the aim is to extract keywords with respect to their relevance in the text without prior vocabulary. In this approach, automatic keyword generation is treated as a classification task, and keywords are commonly extracted based on supervised learning techniques. Thus, keyword extraction algorithms classify candidate keywords in a document into positive or negative examples. Several systems such as Extractor and Kea were developed using keyword extraction approach. Most indicative words in a document are selected as keywords for that document and as a result, keywords extraction is limited to terms that appear in the document. Therefore, keywords extraction cannot generate implicit keywords that are not included in a document. According to the experiment results of Turney, about 64% to 90% of keywords assigned by the authors can be found in the full text of an article. Inversely, it also means that 10% to 36% of the keywords assigned by the authors do not appear in the article, which cannot be generated through keyword extraction algorithms. Our preliminary experiment result also shows that 37% of keywords assigned by the authors are not included in the full text. This is the reason why we have decided to adopt the keyword assignment approach. In this paper, we propose a new approach for automatic keyword assignment namely IVSM(Inverse Vector Space Model). The model is based on a vector space model. which is a conventional information retrieval model that represents documents and queries by vectors in a multidimensional space. IVSM generates an appropriate keyword set for a specific document by measuring the distance between the document and the keyword sets. The keyword assignment process of IVSM is as follows: (1) calculating the vector length of each keyword set based on each keyword weight; (2) preprocessing and parsing a target document that does not have keywords; (3) calculating the vector length of the target document based on the term frequency; (4) measuring the cosine similarity between each keyword set and the target document; and (5) generating keywords that have high similarity scores. Two keyword generation systems were implemented applying IVSM: IVSM system for Web-based community service and stand-alone IVSM system. Firstly, the IVSM system is implemented in a community service for sharing knowledge and opinions on current trends such as fashion, movies, social problems, and health information. The stand-alone IVSM system is dedicated to generating keywords for academic papers, and, indeed, it has been tested through a number of academic papers including those published by the Korean Association of Shipping and Logistics, the Korea Research Academy of Distribution Information, the Korea Logistics Society, the Korea Logistics Research Association, and the Korea Port Economic Association. We measured the performance of IVSM by the number of matches between the IVSM-generated keywords and the author-assigned keywords. According to our experiment, the precisions of IVSM applied to Web-based community service and academic journals were 0.75 and 0.71, respectively. The performance of both systems is much better than that of baseline systems that generate keywords based on simple probability. Also, IVSM shows comparable performance to Extractor that is a representative system of keyword extraction approach developed by Turney. As electronic documents increase, we expect that IVSM proposed in this paper can be applied to many electronic documents in Web-based community and digital library.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.