• Educational Technology International
• /
• 제9권1호
• /
• pp.79-96
• /
• 2008

The issue of connection between entities has a lengthy history in educational research, especially since it provides the necessary bridge between base and target in analogical transfer. Recently, the connection has been viewed through the application of technology to bridge between sequences in order to be cognitively useful. This study reports the effect of sequence type (AT vs. TA) and connection type (fading vs. popping) on the achievement and analogical transfer in a multimedia application. In the current research, 10th -grade and 11th -grade biology students in Korea were randomly assigned to five groups to test the effects of presentation sequence and entity connection type on analogical transfer. Consistent with previous studies, sequence type has a significant effect: analogical transfer performance was better when base representations were presented first followed by target representations rather than the reverse order. This is probably because presenting a familiar base first helps in understanding a less familiar target. However, no fully significant differences were found with the entity connection types (fading vs. popping) in analogical transfer. According to the Markman and Gentner's (2005) spatial model, analogy in a space is influenced only by the differences between concepts, not by distance in space. Thus connection types fail on the basis of this spatial model in analogical transfer test. The findings and their implications for sequence and connection research and practice are discussed. Leveraging on the analogical learning process, specific implications for scaffolding learning processes and the development of adaptive expertise are drawn.

• 한국생산제조학회지
• /
• 제22권2호
• /
• pp.228-234
• /
• 2013

This study focuses on development of a finite element model for analysis of thermal characteristics of a direct-connection spindle of a machining center by joint simulation of heat transfer and thermal deformation. Two finite element analyses were carried out procedurally for heat transfer, first, to identify temperature distribution of components of the spindle and then for thermal deformation to identify their structural behavior based on the temperature distribution. It was assumed that the heat transfer between a component revolving and the surrounding air is identical to that between a flat plate and the running air on it and the heat transfer is based on a uniform surface heat flux for turbulent flow. The results from the analyses were compared with those from experiments to validate the finite element model.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.761-772
• /
• 2009

The introduction of KTX (Korea Train eXpress) provided passengers with a much faster mode of transport, and KTX has become a model railway system. Express railway stations are emphasized as public transit transfer centers, but their service evaluations were not performed appropriately so far. It is possible to know the level of service by developing valuation criteria for their evaluations. The evaluation of transfer centers mainly consists of two parts; connective service with other travel m odes, and transfer service inside transfer stations. Connection is defined as the inter-connection of multi-transportation vehicles, and transfer means that a passenger changes his travel mode to another. Such connective service and transfer service are evaluated by the level of service in terms of transfer facilities, the appropriateness of station layout and the quality of information throughout the facilities. We developed the service evaluation indicators of connective facilities and referred to the indicators of transfer facilities. We examined the 7 stations in Korea that are currently in operation and standardized the methodology of the evaluation process by applying the indicators suggested in this study.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.703-721
• /
• 2010

친환경 녹색성장 대표 교통수단인 철도는 자동차와는 달리 연계환승 체계가 꼭 필요한 교통수단이다. 이에 주요 철도거점역을 중심으로 하는 연계체계의 필요성은 국가적인 핵심 사업으로 필요하게 될것이다, 따라서 이용고객의 환승체계의 시스템이 이루어지지 않으면 녹색성장 및 대중교통 활성화 서비스는 멀게만 느껴질것이다. 아울러, 본 연구에서는 경남지역 철도거점역(창원, 북창원, 마산) 과 타 교통수단간 연계 환승 구축 및 활성화 방안을 소개하고자 한다. 이 방안은 지역거점역의 연계환승체계 구축 모델이 될 수 있을것으로 판단되며, 철도 대중교통 이용고객 편의를 위한 방안으로 적용이 가능할 것으로 판단된다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1999년도 봄 학술발표회 논문집
• /
• pp.94-101
• /
• 1999

There are two methods commonly used in design of splice plate connection of frame structure. The one is Design by Actual Stress which can sufficiently transfer actual force to an adjacent member using rows of bolts. The other is Design by Member Strength which is able to transfer total allowable stress of effective section area to a connected member. In real design, as a matter of convenience, Standard Connection Drawings have used according to Design by Member Strength. But this method underestimate connection force in shear connection where large connection moment occured. In this study, these Design methods are compared by connection moment in shear connections. and the adequate use of them are recommended. Also In order to evaluate more accurately the actual stress of splice plate of flange on moment. connection, a new calculation method of it is recommended.

• 대한토목학회논문집
• /
• 제37권1호
• /
• pp.105-110
• /
• 2017

본 논문에서는 철도역 광역환승센터 및 연계시설의 재원분담 현황과 문제점을 분석하였다. 아울러 해외의 미국과 일본의 재원분담 기준을 검토하였다. 이를 기반으로 철도역 광역환승센터와 연계시설에 대한 중앙정부의 적정 재정분담을 제시하였다. 광역환승센터의 경우 대중교통 중심의 교통체계를 구축하기 위해서는 국고지원 비중을 현재 30%에서 50%이상으로 확대하고 지원대상도 환승센터의 구성시설을 넘어 환승센터로 지정된 부지 및 환승시설 모두를 포함 시켜야 한다. 연계시설은 연계도로는 50%, 연계철도는 70%를 지원하는 분담방안을 제안하였다. 또한 지자체간 재원분담 방안은 관련법에 분담기준이 없어 연계시설의 노선연장 비율에 따라 분담금액을 산정하는 방안을 제안하였다.

• 한국정보통신학회논문지
• /
• 제23권10호
• /
• pp.1282-1289
• /
• 2019

임피던스 변환회로의 신호 전달특성(S21)을 측정하기 위해서는 두 개의 임피던스 변환회로를 대칭 연결하여야 한다. 하지만 두 개의 임피던스 변환회로를 대칭 연결한 회로의 신호 전달특성은 중간 연결 선로의 길이에 의해 영향을 받는다. 본 논문에서는 임피던스 변화회로의 정확한 신호 전달특성을 얻기 위한 중간 연결 선로의 길이를 수식으로 유도하였다. 수식을 이용하여 계산하면 4:1(50-Ω:12.5-Ω) 임피던스 변환회로의 정확한 신호 전달특성을 얻기 위한 중간 연결 선로의 전기적 길이는 약 45°이다. 계산된 연결 선로의 길이를 적용하여 1GHz에서 λ/4-마이크로스트립 임피던스 변환회로를 제작하여 신호 전달특성을 측정하였다. 제작된 대칭 연결된 임피던스 변환회로의 신호 반사 특성(S11)은 0.980GHz에서 -40.64dB, 신호 전달 특성(S21)은 -0.154dB였다. 이는 제작 회로에 대해 이론적으로 살펴본 중심 주파수의 987MHz 변화, 마이크로스트립 선로의 신호 손실 -0.15dB 값과 거의 동일한 값이다.

• Steel and Composite Structures
• /
• 제7권4호
• /
• pp.303-320
• /
• 2007

The objective of this study is to clarify the structural features of members consisting of connection, as a series of the previous study on the CFT column-to-beam tensile connection with combined cross diaphragm. This connection has the merits that the stress is distributed evenly on the beam flange and the diaphragm and the stress concentration is reduced, by improving the stress transfer route and restraining abrupt deformation of diaphragm. The finite element analysis was performed to find out the stress transfer through sleeve which is an important member of the connection with combined cross diaphragm. The length and thickness of sleeve were used as variables for the analysis. As the analysis results, the length and thickness of sleeve didn't influence on the capacity of the connection and played a role of a medium to transfer the stress from the diaphragm to the filled concrete. It is proposed that the appropriate length of sleeve be the same value as the diameter of sleeve and the appropriate ratio of sleeve diameter to sleeve thickness be 20. Two equations for evaluation of the load-carrying capacity of the connection were also proposed through the modification of the evaluation equation suggested in the previous study.

• 한국균학회지
• /
• 제15권4호
• /
• pp.250-253
• /
• 1987

원형질체내에 외래유전물질 도입에 의한 균주 개발의 가능성 검토의 일환으로 사철느타리의 원형질체로부터 핵을 분리하여 느타리의 원형질체내로 전이하여 얻은 결과는 다음과 같았다. 1. 핵전이주는 크게 3가지 type으로 구분되었는데 type 1은 아주 빠른 균사생장과 clamp connection를 형성하지 않으며 CM+benomyl에서 균총분리가 나타남으로서 이질이배체로 사료되었다. type 2는 주된 핵전이주로서 모균주와 비슷하거나 다소 빠른 균사생장과 clamp connection을 지녀 자실체를 형성하였으며 heterokaryon으로서 원형질체 융합주와 유사하였다. 그러고 type 3은 핵 또는 염색체 단편의 전이로 clamp connection를 지니지 않고 아주 느리거나 MM에서 생육이 거의 불가능한 균주였다. 2. 핵전이주 및 모균주를 전기영동법으로 esterase 동위효소 pattern을 조사한 결과 핵전이주는 모균주와 구별되었는데 type 1인 이질이배체는 새로운 band를 나타내었으며, type 2와 type 3은 모균주들을 합한 것으로 보였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.207-210
• /
• 2003

As reviewing of current trend on PC connection details, owing to effective stress transfer in the connection, it grow to increase that use of mechanical splices, reinforcements or welded splices, and prestressing. However such devices as reinforcement, mechanical splices entail not only more cost resulted from materials but also extra construction process so as to cause PC used method to lower competition against conventional method. Therefore more enhanced connection details which help working process simplified and construction cost reduced. In this research, as replace 9.3mm 7strand for reinforcement, it is attempt to devise connection detail which makes workability improve and confirm effective stress transfer in the region of connection. The experimental research is proceeded by partial tension test of specimen. The splice lengths of 7strand is decided to be variations. The flexural capability is verified to depend on spice length. An an appropriate splice length could be also determined as a precedent research on improving PC connection detail.