• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.07a
• /
• pp.326-326
• /
• 2004

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.08a
• /
• pp.53-56
• /
• 2000

본 논문에서는 ISM 대역에서 동작하는 상용화된 RF 모듈을 사용하여 근거리 통신용 송수신 시스템을 구현하고 그 특성을 측정하였다. 기저 대역 데이터를 발생시켜 RF 모듈에 연결하여 전송하고, 수신측에서는 RF 모듈에서 복조된 데이터를 오실로스코우프를 사용하여 확인하였다. 본 실험에서 사용한 RF 모듈은 424MHz부터 429MHz까지의 영역에서 동작하며, FM 방식을 사용한다. 본 대학의 산학협동관 건물내에서 측정한 결과 거리에 따른 신호 감쇠와 신호 수신 감도를 파악할 수 있었으며, 이를 이용하여 건물 내에서의 근거리 통신에 적용할 수 있음을 확인하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.8A
• /
• pp.1238-1246
• /
• 2000

In a multi-channel network based on wavelength division multiplexing (WDM), an efficient protocol is needed for transmitter and receiver to be tuned to same wavelength during message transmission time. This paper proposes a message scheduling protocol that can efficiently support variable-sized messages, where tunable transceiver has nonzero tuning time. In this protocol, once a node reserves one data channel, it can persistently use the reserved channel till message transmission is finished. Therefore, overhead due to tuning time of the tunable transceiver can be reduced. Moreover, the protocol does not require any global information. Therefore, it can operate independently of the change of the number of nodes, and any new node can join the network at anytime without requiring network initialization. With this protocol, one can avoid data channel and destination conflicts. The protocol is analyzed with a finite population model and the throughput-delay characteristics are investigated as performance measures.

• Korean Journal of Optics and Photonics
• /
• v.24 no.1
• /
• pp.23-28
• /
• 2013

In this paper, an optical system was designed for 3D imaging laser radar with optical scanner. In order to make it easy to scan, the system was designed to inscribe the transmitting objective lens in the receiving lens. In transmitting optics, the beam expander was designed to have a zoom mechanism so that the transmitted beam size would be 4.8 m or 6.8 m at 1 km distance, when the laser source's numerical aperture value is between 0.13 and 0.22. The beam diameter at the target 1 km away was confirmed by design program. The receiving optics for the returning beam from the target was designed for the $16{\times}16$ array detector with $100{\mu}m$ pixel width. The spot diameter in every pixel was designed and verified to be less than $55{\mu}m$. The receiving optics' obscuration ratio by transmitting optics was 11%.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.2
• /
• pp.199-208
• /
• 2014

Code division multiple access (CDMA) is one of the promising medium access control (MAC) schemes for underwater acoustic sensor networks because of its robustness against frequency-selective fading and high frequency-reuse efficiency. As a way of performance evaluation, sea or lake experiment has been employed along with computer simulation.. In this study, we design the underwater CDMA forward-link transceiver and evaluate the feasibility aginst harsh underwater acoustic channel in water-tank first. Then, based on the water-tank experiment results, we improved the transceiver and showed the improvements in a lake experiment. A pseudo random noise code acquisition process is added for phase error correction before decoding the user data by means of a Walsh code in the receiver. Interleaving and convolutional channel coding scheme are also used for performance improvement. Experimental results show that the multiplexed data is recovered by means of demultiplexing at receivers with error-free in case of two users while with less than 15% bit error rate in case of three and four users.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.12
• /
• pp.1078-1085
• /
• 2011

In this paper, we analyze the relationship between energy per bit and the data rate with the variation of the system bandwidth. A existing power model is mathematical model to express power consumption of each device. In this paper, we have to investigate the system level energy model for the RF front-end of a wireless transceiver. Also, the effects of the signal bandwidth, PAR, date rate, modulation level, transmission distance, specific attenuation of frequency band, and the signal center frequency on the RF front-end energy consumption and system capacity are considered. Eventually, we analyze the relationship between energy per bit and the data rate with the variation of the system bandwidth so that we simulate the minimum energy per bit in the several Gbps data rate using Shannon capacity theory.

• Journal of IKEEE
• /
• v.16 no.1
• /
• pp.62-68
• /
• 2012

The planar microstrip antenna for the safety communication of life at sea is designed and manufactured to effectively receive the emergency wireless signal from the transmitter on the life vest. The proposed microstrip antenna in this paper is easy to make, light weight and cheap compared to other antennas because of printed antenna fabrication. To overcome the narrow bandwidth, large size and low gain characteristics of microstrip antenna, we use the IDMA(Identical Dual Patch Microstrip Antenna with Air-Gap) structure. The proposed antenna was fabricated with the use of 1.6mm FR4 and measured with the 28.7MHz(6.6%) of bandwidth and 3.04dBi of gain at the frequency of 426MHz. To validate the proposed antenna, we experimented the possible distance range at sea using the commercial UHF transceiver module and obtained over 5km distance for stable communication. This antenna can be widely applied to application of the UHF wireless mobile communication.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.2
• /
• pp.1-8
• /
• 2004

This paper describes the design of monolithic optical transceiver circuitry being used as a part of the fiber optic modules. It has been designed in 0.6 ${\mu}{\textrm}{m}$ 2-poly 3 metal silicon CMOS analog technology and operates at 155.52 Mbps(STM-1) data rates. It drives laser diode to transmit intensity modulated optical signal according to 155.52 Mbps electrical data from system. Also, it receives 155.52 Mbps optical data that transmitted from other systems and converts it to electrical data using photo diode and amplifier. To avoid noise and interference between transmitter and receiver on one chip, layout techniques such as special placement, power supply separation, guard ring, and protection wall were used in the design. The die area is 4 ${\times}$ 4 $\textrm{mm}^2$ and the estimated power dissipation is less than 900 ㎽ with a single 5 V supply.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.9
• /
• pp.11-17
• /
• 2004

This paper describes the implementation of monolithic optical transceiver circuitry being used as a part of the fiber optic modules. It has been fabricated in 0.6 ${\mu}{\textrm}{m}$ 2-poly 3-metal silicon CMOS analog technology and operates at 155.52 Mbps(STM-1) data rates. It drives laser diode to transmit intensity modulated optical signal according to 155.52 Mbps electrical data from system. Also, it receives 155.52 Mbps optical data that transmitted from other systems and converts it to electrical data using photo diode and amplifier. To avoid noise and interference between transmitter and receiver on one chip, layout techniques such as special placement, power supply separation, guard ring, and protection wall were used in the design. The die area is 4 ${\times}$ 4 $\textrm{mm}^2$, and it has 32.3 ps rms and 335.9 ps peak to peak jitter on loopback testing. the measured power dissipation of whole chip is 1.15 W(230 mW) with a single 5 V supply.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.3 s.309
• /
• pp.51-59
• /
• 2006

In this paper, we propose an excellent ultrasonic transceiver system based on a QPSK modulation technique for underwater communication. The transmitter sends a still image at the level of 187dB re $1{\mu}Pa/V@1m$ through a power amplifier by driving an ultrasonic sensor. The receiver performs digital conversion at the 100kHz sampling frequency, demodulation and decoding process for the image sent from the transmitter through the underwater communication. We have shown that the processed image at the receiver is almost the same as the orignal one. The maximum detection distance of the system proposed in this paper is approximately 1.17km. To cope with the difficulties of transmission loss, this paper proposes, implements and analyzes important parameters of sensors and circuits used in the system. Most of the underwater communication has focused on the transmission of audio signal, but this paper suggests an efficient underwater communication system for still image transmission.