• Title/Summary/Keyword: traffic system

Search Result 5,557, Processing Time 0.036 seconds

Estimation of Traffic Safety Improvement Effect of Forward Collision Warning (FCW) (전방충돌경보(FCW)의 교통안전 증진효과 추정)

  • Kim, Hyung-kyu;Lee, Soo-beom;Lee, Hye-rin;Hong, Su-jeong;Min, hye-Ryung
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.20 no.2
    • /
    • pp.43-57
    • /
    • 2021
  • The Forward Collision Warning, a representative technology of the Advanced Driver Assistance Systems, was selected as the target technology. The cognitive response time, deceleration, and impact were selected as the measures of effectiveness. And the amount of change with and without the Forward Collision Warning was measured. The experimental scenarios included a sudden stop event (1) of the vehicle in front of the driver and an event (2) in which the vehicle intervened in the next lane. All experiments were divided into day and night. As a result of the analysis, response time and the deceleration rate decreased when the forward collision warning system was installed. It was analyzed that the driver's risk situation could be detected quickly and the number of front-end collisions could be reduced as a result. Reflecting the driver's operating habits and diversifying the experimental scenarios will increase the installation effectiveness of ADAS and be used to estimate the effectiveness of other technologies.

The Determinants of Port Hinterlands Competitiveness in Korea-China: Focusing on Gwangyang Port and Qingdao Port (한·중 항만배후단지의 경쟁요인 비교분석에 관한 연구: 광양항과 칭다오항을 중심으로)

  • Qing, Cheng lin;Na, Ju Mong
    • International Area Studies Review
    • /
    • v.17 no.4
    • /
    • pp.109-130
    • /
    • 2013
  • This study aims to identify the priority for the Gwangyang and Qingdao hinterlands which are in the same category of benchmarking crowed paths. This study has been mainly done with comparison. There is certain limitation to use competitive factors of existing research so, this study has had proper competitive factors deriving from factors analysis and studied hinterland priority of competing factors by AHP. Major results are as follows. First, the factor analysis resulted in 20 factor that were 0.6 or higher loading level of commonality and then these 20 factors were divided into groups: operating factors, service factors, cost factors, port infrastructure factors, and hinterland conditions factors with the rotated component matrix analysis. Second, according to the result of top competitive factors, the best factor was the hinterland condition(0.256). The other factors such as infrastructure, economy, accessibility, incentive, and port traffic in hinterland were highly ranked in terms of general importance using multiple weights. Third, the result of detailed properties importance about the final alternative, Gwangyang hinterland was considered more highly than Qingdao hinterland in the port information system, the support a variety of administrative services, the efficiency of the customs, and the tax benefits.

A Hardening and Strength Properties of Magnesium Phosphate Mortars for Rapid Repair Materials (급속 보수용 마그네슘 인산염 모르타르의 경화 및 강도특성)

  • Oh, Hongseob;Lee, Inhee
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.23 no.3
    • /
    • pp.103-110
    • /
    • 2019
  • Damage to the pavement system due to various causes will be required rapid repair work for reopening the vehicle traffic. The magnesium oxide phosphate composite(MPC) has a short curing time and is capable of early compressive strength development, is suitable for rapid repair materials. The aim of this study was to evaluate the hardening and compressive strength characteristics of MPC according to the water-binder (W / B) ratio and magnesium-phosphate(M / P) ratio in order to develop repair materials consisted with light burned magnesia and potassium dihydrogen phosphate. In order to ensure the workability in the field application, the difference of mechanical properties according to standard sand and ordinary sand and performance of retards were evaluated. The mix proportion with W/B ratio was about 35% and the M/P ratio was about 1.0 ~ 1.2 has a superior perfomance with strength and hardening condition. Especially, the strength of composite at only 1 day curing with W/B ratio of 0.35 and the M/P ratio of 1.2 was shown the higher than 25.0 MPa. Boric acid as a retarder was found to be suitable for ensuring the working time, and the purity of magnesium oxide was about 90 ~ 95%, which is effective for ensuring curing time and strength.

Development of Street Crossing Assistive Embedded System for the Visually-Impaired Using Machine Learning Algorithm (머신러닝을 이용한 시각장애인 도로 횡단 보조 임베디드 시스템 개발)

  • Oh, SeonTaek;Jeong, Kidong;Kim, Homin;Kim, Young-Keun
    • Journal of the HCI Society of Korea
    • /
    • v.14 no.2
    • /
    • pp.41-47
    • /
    • 2019
  • In this study, a smart assistive device is designed to recognize pedestrian signal and to provide audio instructions for visually impaired people in crossing streets safely. Walking alone is one of the biggest challenges to the visually impaired and it deteriorates their life quality. The proposed device has a camera attached on a pair of glasses which can detect traffic lights, recognize pedestrian signals in real-time using a machine learning algorithm on GPU board and provide audio instructions to the user. For the portability, the dimension of the device is designed to be compact and light but with sufficient battery life. The embedded processor of device is wired to the small camera which is attached on a pair of glasses. Also, on inner part of the leg of the glasses, a bone-conduction speaker is installed which can give audio instructions without blocking external sounds for safety reason. The performance of the proposed device was validated with experiments and it showed 87.0% recall and 100% precision for detecting pedestrian green light, and 94.4% recall and 97.1% precision for detecting pedestrian red light.

An Empirical Study of Soundproof wall with Reduced Wind Load (풍하중 저감형 방음판의 실증 연구)

  • Choi, Jin-Gyu;Lee, Chan-Young
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.19 no.12
    • /
    • pp.272-278
    • /
    • 2018
  • Traffic volume has been greatly increasing due to urban development and the improvement of living standards, and many complaints are being raised due to the increasing road noise. As a countermeasure against these problems, highly soundproof walls are installed on the sides of roads. However, the ability to bear wind loads is a major design requirement for soundproof walls, which contributes to the exponential increases in construction costs and restricts the height of the walls. The aim of this study is to improve the performance of soundproof walls and to dramatically reduce wind loads while maintaining excellent price competitiveness. Based on Helmholz's resonator theory, a new concept is proposed for a ventilation-type soundproofing plate that can pass through a fluid like air and reduce noise. A full-scale metal soundproofing plate was produced to satisfy the quality standards of highways by conducting a sound-pressure transmission-loss test, wind tunnel test, and material quality test. To verify the reliability, the wall was manufactured and installed, and the sound insulation effect was examined by measuring the noise over time. In the future, ventilated soundproof walls on roads could create a pleasant living environment due to the high noise-insulation effect.

Spatial Conservation Prioritization Considering Development Impacts and Habitat Suitability of Endangered Species (개발영향과 멸종위기종의 서식적합성을 고려한 보전 우선순위 선정)

  • Mo, Yongwon
    • Korean Journal of Environment and Ecology
    • /
    • v.35 no.2
    • /
    • pp.193-203
    • /
    • 2021
  • As endangered species are gradually increasing due to land development by humans, it is essential to secure sufficient protected areas (PAs) proactively. Therefore, this study checked priority conservation areas to select candidate PAs when considering the impact of land development. We determined the conservation priorities by analyzing four scenarios based on existing conservation areas and reflecting the development impact using MARXAN, the decision-making support software for the conservation plan. The development impact was derived using the developed area ratio, population density, road network system, and traffic volume. The conservation areas of endangered species were derived using the data of the appearance points of birds, mammals, and herptiles from the 3rd National Ecosystem Survey. These two factors were used as input data to map conservation priority areas with the machine learning-based optimization methodology. The result identified many non-PAs areas that were expected to play an important role conserving endangered species. When considering the land development impact, it was found that the areas with priority for conservation were fragmented. Even when both the development impact and existing PAs were considered, the priority was higher in areas from the current PAs because many road developments had already been completed around the current PAs. Therefore, it is necessary to consider areas other than the current PAs to protect endangered species and seek alternative measures to fragmented conservation priority areas.

Fire resistance assessment in construction joint of precast fireproof duct slab (프리캐스트 방식 내화풍도슬래브 시공조인트부의 화재저항성능 평가)

  • Choi, Soon-Wook;Kang, Tae-Ho;Lee, Chulho;Kim, Se Kwon;Kim, Tae Kyun;Chang, Soo-Ho
    • Journal of Korean Tunnelling and Underground Space Association
    • /
    • v.23 no.5
    • /
    • pp.359-370
    • /
    • 2021
  • Duct slabs, which are used to build ventilation facilities in underground spaces with transverse ventilation system, need to secure fire resistance according to longitudinal and heavy vehicle traffic of tunnels. This study measured the temperature change at the construction joint of the precast fireproof duct slab which integrates fire resistance material and duct slab under the RWS fire scenario. As a result, it was confirmed that if there is no reinforcement of the construction joint, damage will occur in concrete inside the construction joint, leading to damage to the fireproofing layer. On the other hand, when one side of the construction joint was reinforced with fireproofing materials, it showed more than three times the fire resistance performance compared to when there was no reinforcement. At this time, cross-sectional losses of concrete and fireproofing layer were shown in blocks without reinforcement, but no damage was seen in the reinforced blocks.

A Study of Hazard Analysis and Monitoring Concepts of Autonomous Vehicles Based on V2V Communication System at Non-signalized Intersections (비신호 교차로 상황에서 V2V 기반 자율주행차의 위험성 분석 및 모니터링 컨셉 연구)

  • Baek, Yun-soek;Shin, Seong-geun;Ahn, Dae-ryong;Lee, Hyuck-kee;Moon, Byoung-joon;Kim, Sung-sub;Cho, Seong-woo
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.19 no.6
    • /
    • pp.222-234
    • /
    • 2020
  • Autonomous vehicles are equipped with a wide rage of sensors such as GPS, RADAR, LIDAR, camera, IMU, etc. and are driven by recognizing and judging various transportation systems at intersections in the city. The accident ratio of the intersection of the autonomous vehicles is 88% of all accidents due to the limitation of prediction and judgment of an area outside the sensing distance. Not only research on non-signalized intersection collision avoidance strategies through V2V and V2I is underway, but also research on safe intersection driving in failure situations is underway, but verification and fragments through simple intersection scenarios Only typical V2V failures are presented. In this paper, we analyzed the architecture of the V2V module, analyzed the causal factors for each V2V module, and defined the failure mode. We presented intersection scenarios for various road conditions and traffic volumes. we used the ISO-26262 Part3 Process and performed HARA (Hazard Analysis and Risk Assessment) to analyze the risk of autonomous vehicle based on the simulation. We presented ASIL, which is the result of risk analysis, proposed a monitoring concept for each component of the V2V module, and presented monitoring coverage.

The effects of PM driving direction and alert sound type on risk perception and awareness of PM driver of pedestrians (개인형 이동장치(PM)의 주행 방향과 경고방식의 차이가 보행자의 위험 지각과 주행자에 대한 인식에 미치는 영향)

  • Jung, Yoon-Hyun;Lee, Soo-Ji;Kang, Hyunmin
    • Journal of Digital Convergence
    • /
    • v.19 no.7
    • /
    • pp.217-226
    • /
    • 2021
  • The use of personal mobility(PM) is increasing because of preading shared mobility, but, it causes risk of accidents and fear to pedestrians because of lack of sound. The purpose of this study is to find out the effects of the alert sound in PM and driving direction on risk perception of pedestrians, awareness on PM driver, and allowance for driving on each road. The 8 videos were produced from a pedestrian perspective, depending on the alert sound type(silent, vess, bell, voice) and direction of driving(front, back). After watching each video, participants completed surveys. There was a non-effect on the driving direction. Regardless of the alert sound type, all of the sounds reduced the risk perception. Also, the awareness of PM drivers and allowance for driving on each road were positive. This study found that PM needed an alert sound for pedestrian safety. We expect the results of the study to help improve awareness of PM and make policies and regulations.

AHP Study on the Decision Making Factors of Farm-Returning and Rural-Returning: Focusing on the Determinants of Migration Area (귀농·귀촌 의사결정요인에 관한 AHP 분석 연구: 이주지역 선택 결정요인을 중심으로)

  • Lee, Won Suk;Jang, Sang-hyun;Choi, Joowon;Shin, Yongtae
    • KIPS Transactions on Computer and Communication Systems
    • /
    • v.10 no.3
    • /
    • pp.81-92
    • /
    • 2021
  • As the aging population of Korean agriculture and rural areas and the decline of the agricultural population are gradually deepening, the influx of population through returning to farming and rural areas is urgently needed. To this end, the most important problems to be solved were the lack of information that would help those who want to return to farming or rural areas when making decisions. Therefore, a survey was conducted for AHP analysis on related experts to find out the information (decision factors) required when selecting a return-to-farm or return-to-country migration area through this study. The AHP analysis showed that "Economic factors" were the most important among the three items in the primary class, while "Housing and land prices", "Metropolitan accessibility and traffic" and "Residential information" were the most important in the secondary class. The results of these studies are reflected in the information system to systematically support the decision-making of those who wish to return to farming or rural areas.It is hoped that it will be indirectly helpful and ultimately contribute to the revitalization and development of Korean agriculture and rural areas, which are aging.