• Journal of Communications and Networks
• /
• v.11 no.6
• /
• pp.574-588
• /
• 2009

Although much research has been conducted in the area of authentication in wireless networks, vehicular ad-hoc networks (VANETs) pose unique challenges, such as real-time constraints, processing limitations, memory constraints, frequently changing senders, requirements for interoperability with existing standards, extensibility and flexibility for future requirements, etc. No currently proposed technique addresses all of the requirements for message and entity authentication in VANETs. After analyzing the requirements for viable VANET message authentication, we propose a modified version of TESLA, TESLA++, which provides the same computationally efficient broadcast authentication as TESLA with reduced memory requirements. To address the range of needs within VANETs we propose a new hybrid authentication mechanism, VANET authentication using signatures and TESLA++ (VAST), that combines the advantages of ECDSA signatures and TESLA++. Elliptic curve digital signature algorithm (ECDSA) signatures provide fast authentication and non-repudiation, but are computationally expensive. TESLA++ prevents memory and computation-based denial of service attacks. We analyze the security of our mechanism and simulate VAST in realistic highway conditions under varying network and vehicular traffic scenarios. Simulation results show that VAST outperforms either signatures or TESLA on its own. Even under heavy loads VAST is able to authenticate 100% of the received messages within 107ms. VANETs use certificates to achieve entity authentication (i.e., validate senders). To reduce certificate bandwidth usage, we use Hu et al.'s strategy of broadcasting certificates at fixed intervals, independent of the arrival of new entities. We propose a new certificate verification strategy that prevents denial of service attacks while requiring zero additional sender overhead. Our analysis shows that these solutions introduce a small delay, but still allow drivers in a worst case scenario over 3 seconds to respond to a dangerous situation.

• Journal of Navigation and Port Research
• /
• v.33 no.6
• /
• pp.415-421
• /
• 2009

Recently, the volume of transshipment containers in Busan Port has been declining significantly and domestic ports' throughput is shown far below the projected one. Accordingly, the national port development plan made to capture the sharply increasing demand in the past seems to be subject to an amendment, and inducing port container traffic becomes a key issue. In such situation this paper aims at analysing the effect of logistics cost saving when Japanese import and export containers are transshipped in Busan port. For this we developed 3 scenarios for the movement of containers through the major container ports in western cost of Japan, analysed logistics costs together with cost savings and finally derived some implication for inducing the containers to Busan Port.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.7
• /
• pp.1256-1271
• /
• 1994

In this paper a GFC protocol based on HMR(High-speed Multimedia Ring) with a dynamic quota allocation is proposed and the performance of proposed protocol is evaluated by simulation. The HMR a medium access protocol proposed for Gbit ATM-LAN, can be applied to the GFC protocol without any modification because it uses only 4 bits for medium access of several topologies such as bus, ring and stared-bus, and priority control for satisfaction of different QoS(Quality of Service) requirements. The quota allocation method of HMR called static quota allocation has a problem of excessive access delay for the traffic with high burstness. In this paper a dynamic quota allocation method which allocates quota to the nodes according to the queue length is proposed and the performance of HMR with dynamic quota allocation is evaluated by seven simulation scenarios of CCITT. The HMR with proposed method shows better shows better access delay characteristics than the HMR with static quota allocation. Also the simulation results show that access delay performance of HMR is better than that of ATMR proposed by Japan and is similar to that of DQDB proposed by Australia.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.8C
• /
• pp.731-741
• /
• 2009

Optical repeater is often installed at the isolated area. Spatial separation makes it possible to reduce the inter-code interference when secondary scrambling codes are used for traffic connected through repeater. In this paper, we propose five secondary scrambling code usage scenarios with the aids of optical repeater to maximize the user capacity. In order to evaluate the performance, dynamic system level simulation is performed. We also propose a base station-repeater switching where each active users can change access points by comparing the channel condition from base station and repeater thorough secondary common pilot channel (S-CPICH) signal to noise-interference ratio (SINR). Moreover, primary-secondary scramble code replacing scheme is proposed which replaces secondary scramble code with primary scramble code when a call using primary scramble code is ended and its corresponding OVSF code is available to users using the secondary scramble code

• Journal of Environmental Impact Assessment
• /
• v.7 no.2
• /
• pp.89-102
• /
• 1998

The purpose of this study is to seek AEI(Air Environmental Indices), PSI(Pollutant Standard Index) and the urban air quality control goal(the best available alternative energy program) by assessing the best ratio of energy types used in urban enterprises, based on harmful health effect and air quality standard and costs. This study is focused on an urban area(Puchun), where area sourcees are associated with heavy traffic, large population, and its industrial sources with large emissions. In the first step, air modeling, estimation of AEI and PSI, and benefit-cost analysis were carried out. In the second step, we assessed that 660 scenarios about the ratio of B-C oil, light oil and LNG used in urban enterprises with regard to air quality and cost. In the third step, the best available alternative energy program was selected for the ratio of energy species(B-C oil, light oil and LNG) by using the lexicographic method. From the emission analysis, main source of $NO_2$ is identified as industries and air quality is evaluated according to the ratio of B-C oil, light oil and LNG used in urban enterprise. The modeling data of TSP, $SO_2$, $NO_2$, CO, $O_3$, by ISC3 and PBM are respectively $118{\mu}g/m^3$, 0.027ppm, 0.025ppm, 2.0ppm, 0.55ppm in indurstrial area. That data are close to Environmental Air Quality Standard. By means of sensitivity analysis, we obtained the difference in concentration between the areas(Nae-dong, Joong-dong) according to the ratio of B-C oil, light oil and LNG used in the industries. From the result of alternatives assessment the lowest AEI value and cost, the ratio of B-C oil, light oil and LNG are 2.5%, 20%, 77.5%, respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.2C
• /
• pp.188-195
• /
• 2012

Many systems are developing for the realization of NCW(Network Centric Warfare). UAV(Unmanned Aerial Vehicle) Network is attracting attention in a lot of military applications. In general, UAVs have the potential to create an ad-hoc network and greatly reduce the hops from source to destination. However, UAV networks exhibit unique properties such as high mobility, high data rate, and real time service. The routing protocols are required to design the multi-hop routing protocols that can dynamically adapt to the requirements of UAV network. In this paper we analyse Geographic Routing Protocol is based on geographical distance between source and destination for efficient and reliable transmission. Geographic Routing Protocol is evaluated in video service scenarios with TDMA model in our simulation. The simulation results show that the performance of Geographic Routing Protocol is better than the MANET Routing Protocol in terms of packet received ratio, end to end delay, and routing traffic sent.

• The Journal of the Korea Contents Association
• /
• v.19 no.12
• /
• pp.452-459
• /
• 2019

In order for an autonomous vehicle to be commercialized, it is necessary to conduct a safety test for every aspect. Considering the implementation of the autonomous vehicles technologies to the highest level, it is necessary to analyze the possible scenarios in the most complex environment as in the urban area. It should be confirmed whether autonomous vehicles can be operated with conventional traffic signal environment. It is also required to confirm the ability of autonomous vehicles in interacting with other vehicles, and coping with possible accidents on the road. In this study, the evaluation factors of autonomous vehicles in the road environment are selected by referring to the other evaluation protocols like ADAS. Study result would be reflected in establishing the autonomous vehicle evaluation method for different test environment along with various technology implementation level.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.1
• /
• pp.39-45
• /
• 2008

This paper considers the multi-objective optimization of a multi-service arrayed waveguide grating-based single-hop WDM network with the two conflicting objectives of maximizing throughput while minimizing delay. This paper presents a genetic algorithm based methodology for finding the optimal throughput-delay tradeoff curve, the so-called Pareto-optimal frontier. Genetic algorithm based methodology provides the network architecture parameters and the Medium Access Control protocol parameters that achieve the Pareto-optima in a computationally efficient manner. The numerical results obtained with this methodology provide the Pareto-optimal network planning and operation solution for a wide range of traffic scenarios. The presented methodology is applicable to other networks with a similar throughput-delay tradeoff.

• Journal of the Korea Society for Simulation
• /
• v.20 no.1
• /
• pp.107-116
• /
• 2011

Recently, femtocell has been concerned as one of effective solutions to relieve shadow region and provide high quality services to users in indoor environments. Even though femtocell offers various benefits to cellular operators and users, many technical issues, such as interference coordination, network synchronization, self-configuration, self-optimization, and so on, should be solved to deploy the femtocell in current network. In this paper, we develop a simulator for evaluating performance of long term evolution (LTE) femtocell systems under various interference scenarios. The simulator consists of a main-module and five sub-modules. The main-module connects and manages five sub-modules which have the functionality managing user mobility, packet scheduling, call admission control, traffic generation, and modulation and coding scheme (MCS). To provide user convenience, the simulator adopts graphical user interface (GUI) which can observes simulation results in real time. We expect that this simulator can contribute to developing effective femtocell systems by supporting a tool for analyzing the effect of interference between macrocell and femtocell.

• Journal of the Korea Society for Simulation
• /
• v.20 no.1
• /
• pp.19-28
• /
• 2011

The safety applications based on the IEEE 802.11p, periodically transmit the safety-related information to all surrounding vehicles with high reliability and a strict timeline. However, due to the high vehicle mobility, dynamic network topology and limited network resource, the fixed beacon scheduling scheme excess delay and packet loss due to the channel contention and network congestion. With this motivation, we propose a novel beacon scheduling algorithm referred to as spatial-aware(SA) beacon scheduling based on the spatial context information, dynamically rescheduling the beaconing rate like a TDMA channel access scheme. The proposed SA beacon scheduling algorithm was evaluated using different highway traffic scenarios with both a realistic channel model and 802.11p model in our simulation. The simulation results showed that the performance of our proposed algorithm was better than the fixed scheduling in terms of throughput, channel access delay, and channel load. Also, our proposed algorithm is satisfy the requirements of vehicular safety application.