• Journal of Korean Society of Transportation
• /
• v.26 no.5
• /
• pp.73-80
• /
• 2008

ALINEA algorithm, which is one of the best on-ramp metering algorithms, was designed to control the traffic volume from on-ramp in order to maintain the optimal occupancy rate of the detectors installed downstream of the merge area. But, the reliability of occupancy rate estimated from the loop detectors, which are used most commonly in Korea, is relatively lower than other parameters such as speed and volume. Moreover, because occupancy rate depends on the length of loop detectors and site, lots of calibration work is required whenever they are installed in order to estimate the occupancy rate. Therefore, there exists room for improvement of ALINEA algorithm because only occupancy rate having some problems is considered as a control parameter in ALINEA algorithm. Practically it is difficult to measure or perceive the occupancy rate for traffic engineers and drivers. On the other hand, speed can be good alternative which can overcome the defect induced by using occupancy. In this study, occupancy based ALINEA algorithm is converted to speed based ALINEA assuming the linear relationship between density and speed.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.8 no.1
• /
• pp.53-63
• /
• 2006

The objective of this study is to analyze the smoke movement and the smoke extraction efficiency using by the partial extraction system for case of tunnel fire. Based on Froude modeling and isothermal model, the 1/20 scaled model tunnel (12m long) was constructed. In the case of the upper critical velocity in the main tunnel, the smoke extraction efficiency shows almost same between group damper and distributed damper. Finally, if the fire occurs on a traffic Jam in a tunnel, it is proposed that the open dampers in partial gallery extract smoke from the main tunnel without jet fan operation. Then, after the passengers have escaped the tunnel, the jet fans work on. On the other hand, If the traffic is uncongested in the tunnel, the jet fans (smoke control system) and partial extraction system (smoke exhaust system) are operated at once in tunnel fire.

• Journal of Korean Society of societal Security
• /
• v.2 no.4
• /
• pp.49-57
• /
• 2009

The development and use of underground space in the city have been expanded considerably worldwide due to the growing population and traffic. Because the construction of underground causes some problems including traffic jam and safety accidents, the non-open excavation construction method are commonly used. NTR (New Tubular Roof) method which is one of the non-open excavation method is investigated in this study. The structural safety of underground structures by using NTR method is evaluated by ANSYS 9.0. The tubular roof according to diameters are analysed by ANSYS 9.0 at critical construction step. Finally, according the diameter and thickness of tubular roof the stress nad dispacement are analyzed and then the The efficient use of tubular roof is suggested from relationship between tubular's thickness and stress condition.

• International Journal of Highway Engineering
• /
• v.14 no.3
• /
• pp.87-96
• /
• 2012

This research overcomes limit of prevention of disasters connection manual that was stopping in existing administrative formality presentation, and allowed purpose in substantial prevention of disasters countermeasure presentation through powerful engineering access. Did operation plan manual Tuesday in contiguity crossing that can reduce confusion by vehicleses that detour by contiguity IC of disaster point to do unusualness ashes in freeway section for this and solve jam-up phenomenon that occur by processing way insufficiency for roundabout way vehicles when happen. Metropolitan areas to target type classification in the highway along the highway adjacent to the intersection at Main Line Blocking optimum operating point analysis and an analysis of countermeasures in case of disaster, the lower the road entering the highway depending on the type of operating at the intersection were different. Depending on the results of analysis, while each point of a disaster, according to the characteristics of geometric conditions, traffic conditions, identify and determine the operating room and the adjacent intersection of media, and building systems to promote the driver if the quick initial response from the impending disaster situations and the safety of drivers can be considered secure.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.5
• /
• pp.171-179
• /
• 2004

Today, the number of vehicle increased rapidly with the development of modem science technology, and it caused serious problems; traffic jam, accident and pollution etc. One of the solve methods these problems it is necessary to develope the vehicle navigation systems and it is already widely used to in field of military etc. Vehicle navigation system can increase the efficiency of traffic flow and offer at a drivers at a best driving conditions. In the vehicle navigation, most important thing is to measure of correct position. There are classifiable as three types. The first is G.P.S., method at artificial satellites which measures the present position and velocity any time, any where in the world at the same time. Secondly, a vehicle can determine its position and path information with a gyroscope and odometer signal, which is called Dead-Reckoning method. Thirdly, hybrid navigation system is the combined of two methods to make utilize the advantage of each navigation system. In the paper, we are analyzed to characteristics at a gyro sensor and introduce at a composition of hybrid navigation system which is combined with the G.P.S., D.R., and map-matching technique. We analyze deeply for the Map-Matching method and explain the coordinate transformation for G.P.S., and the Hybrid navigation algorithm is developed and experimented. Finally, we conclude and comment about our road test results.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2615-2625
• /
• 2011

Recently in worldwide and Korea domestically, the LRT vehicles are introduced as reputable urban transit system, in a view of energy saving, punctuality and eco-friendly as well as transport efficiency. At first time in Korea, the Busan metro Line 4 was applied with AGT system which is a kind of LRT using the Rubber tired AGT vehicle and developed from 1999 to 2004 in charge of Korean government. Busan selected the AGT system for Metro Line 4 as the solution of traffic jam and networking the intercity. At present, Busan Metro Line 4 has been running since opened at March 30, 2011. The vehicle of Busan metro line 4 is aiming the maximization of LRT vehicle advantage that is the lightness of vehicle size and vehicle weight. So, it did size downed and weight downed by lightened the weight of car frame and bogies and by the compactness of electrical on-board equipments. The study carried out the structure analysis to verify and safety and performance of car body and bogie frame of Busan Metro Line 4 vehicles. In this study, it was analyzed the stress of main load and verified the fatigue strength. And measured the dynamic stress sending to body structure and bogie frame while running on main line and analyzed the fatigue stress. As a result, it verified the safety and life cycle of car body and bogie frame.

• Journal of Korean Institute of Industrial Engineers
• /
• v.32 no.1
• /
• pp.61-73
• /
• 2006

This paper deals with traveling salesman problem(TSP) with the stochastic travel time. Practically, the travel time between demand points changes according to day and time zone because of traffic interference and jam. Since the almost pervious studies focus on TSP with the deterministic travel time, it is difficult to apply those results to logistics problem directly. But many logistics problems are strongly related with stochastic situation such as stochastic travel time. We need to develop the efficient solution method for the TSP with stochastic travel time. From the previous researches, we know that Q-learning technique gives us to deal with stochastic environment and neural network also enables us to calculate the Q-value of Q-learning algorithm. In this paper, we suggest an algorithm for TSP with the stochastic travel time integrating Q-learning and neural network. And we evaluate the validity of the algorithm through computational experiments. From the simulation results, we conclude that a new route obtained from the suggested algorithm gives relatively more reliable travel time in the logistics situation with stochastic travel time.

• KIEAE Journal
• /
• v.8 no.3
• /
• pp.27-36
• /
• 2008

Urban architecture density is getting higher, and this trend is expected to continue in the future. Therefore, skyscrapers are being brought into relief as future alternative architecture beyond symbolic meaning in the aspect of demand and supply of urban space. However, skyscrapers which were newly built have many problems such as consumption of enormous amounts of energy, destruction of natural environment, and traffic jam. For this reason, environment-friendly skyscrapers based on the concept such as Green Building and Green Skyscraper started to be built around the world. However, plans or evaluation standards, which take account of the environment-friendly aspect of skyscrapers, leave much to be desired. And especially it is hard to find environment-friendly skyscrapers. Therefore, this study aims to establish the concept of environment-friendly skyscrapers that has not properly been defined, and to find realistic planning methods and practical alternatives through the analysis of the works that have brilliant ideas about environment-friendly architectural method. From the perspective of architectural planning, we did case analysis focused on site planning, form planning, elevation and floor planning, and tried to give useful ideas for high-rise architectural planning in Korea by finding practical solution focused on the active use of natural energy, saving resources, the reduction of wastes, natural architectural environment design and natural friendly system from the view of environment-friendly technological analysis.

• KIEAE Journal
• /
• v.8 no.2
• /
• pp.31-40
• /
• 2008

As horizontal expansion of a city reaches the uppermost limit, on the ground of perpendicular expansion and efficiency of land use, skyscrapers go on increasing in number. However, skyscrapers which were newly built in Korea have many problems such as consumption of enormous amounts of energy, destruction of natural environment, and traffic jam. And from now on, environment-friendly development of skyscraper is urgently needed. Therefore, in this study, we tried to find the planning elements and estimation indexes to improve the environment-friendly quality of high-rise residential architecture by investigating environment-friendly skyscraper certification in Korea and the other countries. For that reason, we investigated the application ratios of 10 cases in Korea. And the results showed that the application ratios of environment-friendly estimation indexes were lower than 50% and the environment-friendly quality of skyscrapers in Korea was generally low. Therefore, based on these planning elements and estimation indexes, we tried to establish the guideline of improvement direction for environment-friendly development of high-rise residential architecture in Korea.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.816-819
• /
• 2011

The image recognition system using CCTV camera has been introduced to minimize not only loss of life and property but also traffic jam in the tunnel. In this paper, multi-object detection algorithm is proposed to track multi vehicles. The proposed algorithm is to detect multi cars based on Adaboost and to track multi vehicles to use template matching. As results of simulations, it is shown that proposed algorithm is useful for tracking multi vehicles.