• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.17 no.1
• /
• pp.31-37
• /
• 2024

In this study, we propose a machine vision-based pedestrian signal detection algorithm that operates efficiently even in computing resource-constrained environments. This algorithm demonstrates high efficiency within limited resources and is designed to minimize the impact of ambient lighting by sequentially applying HSV color space-based image processing, binarization, morphological operations, labeling, and other steps to address issues such as light glare. Particularly, this algorithm is structured in a relatively simple form to ensure smooth operation within embedded system environments, considering the limitations of computing resources. Consequently, it possesses a structure that operates reliably even in environments with low computing resources. Moreover, the proposed pedestrian signal system not only includes pedestrian signal detection capabilities but also incorporates IoT functionality, allowing wireless integration with a web server. This integration enables users to conveniently monitor and control the status of the signal system through the web server. Additionally, successful implementation has been achieved for effectively controlling 50W LED pedestrian signals. This proposed system aims to provide a rapid and efficient pedestrian signal detection and control system within resource-constrained environments, contemplating its potential applicability in real-world road scenarios. Anticipated contributions include fostering the establishment of safer and more intelligent traffic systems.

• Journal of KIISE:Information Networking
• /
• v.29 no.6
• /
• pp.595-612
• /
• 2002

One of the most important issues in guaranteeing the high degree of QoS on mobile computing is how to reduce hand-off drops caused by lack of available bandwidth in a new cell. Each cell can request bandwidth reservation to its adjacent cells for hand-off calls. This reserved bandwidth can be used only for hand-offs, not for new calls. It is also important to determine how much of bandwidth should be reserved for hand-off calls because reserving too much would increase the probability of a new call being blocked. Therefore, it is essential to develop a new mechanism to provide QoS guarantee on a mobile computing environment by reserving an appropriate amount of bandwidth and call admission control. In this paper. bandwidth reservation and call admission control mechanisms are proposed to guarantee a consistent QoS for multimedia traffics on a mobile computing environment. For an appropriate bandwidth reservation, we propose an adaptive bandwidth reservation mechanism based on an MPP and a 2-tier cell structure. The former is used to predict a next move of the client while the latter to apply our mechanism only to the client with a high hand-off probability. We also propose a call admission control that performs call admission test only on PNC(Predicted Next Cell) of a client and its current cell. In order to minimize a waste of bandwidth caused by an erroneous prediction of client's location, we utilize a common pool and QoS adaptation scheme. In order evaluate the performance of our call admission control mechanism, we measure the metrics such as the blocking probability of new calls, dropping probability of hand-off calls, and bandwidth utilization. The simulation results show that the performance of our mechanism is superior to that of the existing mechanisms such as NR-CAT2, FR-CAT2, and AR-CAT2.

• Journal of Intelligence and Information Systems
• /
• v.22 no.1
• /
• pp.107-118
• /
• 2016

The advent of 5G mobile communications, which is expected in 2020, will provide many services such as Internet of Things (IoT) and vehicle-to-infra/vehicle/nomadic (V2X) communication. There are many requirements to realizing these services: reduced latency, high data rate and reliability, and real-time service. In particular, a high level of reliability and delay sensitivity with an increased data rate are very important for M2M, IoT, and Factory 4.0. Around the world, 5G standardization organizations have considered these services and grouped them to finally derive the technical requirements and service scenarios. The first scenario is broadcast services that use a high data rate for multiple cases of sporting events or emergencies. The second scenario is as support for e-Health, car reliability, etc.; the third scenario is related to VR games with delay sensitivity and real-time techniques. Recently, these groups have been forming agreements on the requirements for such scenarios and the target level. Various techniques are being studied to satisfy such requirements and are being discussed in the context of software-defined networking (SDN) as the next-generation network architecture. SDN is being used to standardize ONF and basically refers to a structure that separates signals for the control plane from the packets for the data plane. One of the best examples for low latency and high reliability is an intelligent traffic system (ITS) using V2X. Because a car passes a small cell of the 5G network very rapidly, the messages to be delivered in the event of an emergency have to be transported in a very short time. This is a typical example requiring high delay sensitivity. 5G has to support a high reliability and delay sensitivity requirements for V2X in the field of traffic control. For these reasons, V2X is a major application of critical delay. V2X (vehicle-to-infra/vehicle/nomadic) represents all types of communication methods applicable to road and vehicles. It refers to a connected or networked vehicle. V2X can be divided into three kinds of communications. First is the communication between a vehicle and infrastructure (vehicle-to-infrastructure; V2I). Second is the communication between a vehicle and another vehicle (vehicle-to-vehicle; V2V). Third is the communication between a vehicle and mobile equipment (vehicle-to-nomadic devices; V2N). This will be added in the future in various fields. Because the SDN structure is under consideration as the next-generation network architecture, the SDN architecture is significant. However, the centralized architecture of SDN can be considered as an unfavorable structure for delay-sensitive services because a centralized architecture is needed to communicate with many nodes and provide processing power. Therefore, in the case of emergency V2X communications, delay-related control functions require a tree supporting structure. For such a scenario, the architecture of the network processing the vehicle information is a major variable affecting delay. Because it is difficult to meet the desired level of delay sensitivity with a typical fully centralized SDN structure, research on the optimal size of an SDN for processing information is needed. This study examined the SDN architecture considering the V2X emergency delay requirements of a 5G network in the worst-case scenario and performed a system-level simulation on the speed of the car, radius, and cell tier to derive a range of cells for information transfer in SDN network. In the simulation, because 5G provides a sufficiently high data rate, the information for neighboring vehicle support to the car was assumed to be without errors. Furthermore, the 5G small cell was assumed to have a cell radius of 50-100 m, and the maximum speed of the vehicle was considered to be 30-200 km/h in order to examine the network architecture to minimize the delay.

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2003.06a
• /
• pp.24-25
• /
• 2003

Lead is ubiquitous in the human environment as a result of industrialization. China's rapid industrialization and traffic growth have increased the potential for lead emissions. Lead poisoning in children is one of the most common public health problems today, and it is entirely preventable. Children are more vulnerable to lead pollution and lead in their bodies can affect their nervous, circulatory, and digestive systems. Children are exposed to lead from different sources (such as paint, gasoline, and solder) and through different pathways (such as air, food, water, dust, and soil). Although all children are exposed to some lead from food, air, dust, and soil, some children are exposed to high dose sources of lead. Significant sources of lead for China's children include industrial emissions (often close to housing and schools), leaded gasoline, and occupational exposure that occurs when parents wear lead-contaminated clothing home from work, burning of coal for home heat and cooking, contaminated food, and some traditional medicines. To assess the blood lead level in children in China, a large-scale study was conducted in 19 cities among 9 provinces during 1997 to 2000. There were 6502 children, aged 3-5 years, were recruited in the study The result indicates that the mean blood lead level was 8.83ug/dl 3-5 year old living in city area. The mean blood lead level of boys was higher than that of girls (9.1l ug/dl vs 8.73ug/dl). Almost 30 percent childrens blood lead level exceeded 10ug/dl. The average blood lead level was higher than that of in 1985 (8.83ug/dl vs 8.lug/dl). An epidemiological study was carried on the children living around the cottage industries recycling the lead from battery. Nine hundreds fifty nine children, aged 5-12 years, living in lead polluted villages where the lead smelters located near the residential area and 207 control children live in unpolluted area were recruited in the study. The lead levels in air, soil, drinking water and crops were measured. The blood lead and ZnPP level were tested for all subjects. The results show that the local environment was polluted. The lead levels both in the air and crops were much higher than that of in control area. In the polluted area, the average blood level was 49.6ug/dl (rang 19.5-89.3ug/dl). Whereas, in the unpolluted area, the average blood level was 12.4ug/dl (rang 4.6-24.8ug/dl). This study indicates that in some countryside area, some cottage industries induce seriously lead pollution and cause children health problem. For the introducing of unleaded gasoline in some large cities, such as Beijing and Shanghai, the blood lead level showed a declined trend since 1997. By 2000, the use of leaded gasoline in motor vehicles has been prohibited in China. The most recent data available show that levels of lead in blood among children in Shanghai decreased from 8.3ug/dl in 1997 to 7.6ug/dl in 1999. The prevalence rate of children lead poisoning (blood lead >10ug/dl) was also decreased from 37.8% to 24.8%. In children living in downtown area, the blood lead level reduced dramatically. To explore the relationship between gene polymorphisms and individual susceptibility of lead poisoning, a molecular epidemiological study was conducted among children living in lead polluted environment. The result showed that the subjects with ALAD2 allele has higher ZPP level, and the subjects with VDR B allele has larger head circumference than only with b allele. In the present study, we demonstrated that ALAD genotypes modify lead effects on heme metabolism and VDR gene variants influence the skull development in highly exposed children. The polymorphism of ALAD and VDR genes might be the molecular inherited factor modifying the susceptibility of lead poisoning. Recently, Chinese government pays more attention to lead pollution and lead poisoning in children problem. The leaded gasoline was prohibited used in motor vehicles since 2000. The government has decided to have a clampdown on the high-polluted lead smelters for recycling the lead from battery in countryside. It is hopeful that the risk of lead poisoning in children will be decreased in the further

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.3 no.1 s.4
• /
• pp.85-96
• /
• 2004

The study begin with a basic concept, if the occupancy length of vehicle detector is directly proportional to the delay of vehicle. That is, it analogize vehicle's delay of a occupancy time. The results of a study was far superior in the estimation of a queue length. It is a very good points the operator is not necessary to optimize s1, s2, Thdoc. Thdoc(critical congestion degree) replaced 0.7 with 0.2 - 0.3. But, if vehicles have been experience in delay was not occupy vehicle detector, the study is in existence some problems. In conclusion, it is necessary that stretch queue detector or install paired queue detector. Also I want to be made steady progress a following study relation to this study, because it is required traffic signal control on congestion.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.1
• /
• pp.25-35
• /
• 2005

This study analyzed total concentrations and existing forms of heavy metals in soils of Ulsan using a sequential extraction method. Soil samples were collected from 6 categorized areas including green, residential, heavy traffic, petrochemical industrial complex(IC), mechanical and shipbuilding IC, and non-ferrous metal IC areas. which represent different emission characteristics. The highest total concentrations of heavy metals by a sequential extraction analysis were observed in the soils collected from the non-ferrous metal IC area, followed by the mechanical and shipbuilding IC and heavy traffic areas. Dominant(> 50%) existing forms of Cd, Cr and Ni were residual forms followed by Fe and Mn oxides in almost areas. Residual fractions in the non-ferrous metal IC areas were relatively lower than those in other areas. However, the fractions of organic and sulphides in the IC areas were higher. The dominant farms of Cu were much different with the investigated areas. In most areas, the dominant forms of Pb and Zn were Fe and Mn oxides, followed by residual fraction for Pb. The exchangeable and carbonate fractions represent mobility of metallic elements in soils. They are also significantly affected by the environmental renditions, such as pHs of soil and rainfall. In this study the exchangeable and carbonate fractions were lower than other fractions. Because the total concentrations of heavy metals in the soils of the non-ferrous metal IC area were extremely high, however, the mobile fractions of heavy metals in the IC area would be significant. Thus a large amount of heavy metals can be released into plants, water bodies, and soils. Therefore, urgent measures, such as source control for soil remediation of heavy metals, in the non-ferrous metal IC areas are essentially required. Analysis results obtained from the sequential extraction and the aqua regia extraction showed a high correlation, whose determination coefficients(R2) of heavy metals except Cd approximately ranged from 0.7 to 0.9.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.3
• /
• pp.174-182
• /
• 2011

The present study evaluated the major lead sources in a steel metallurgy industrialized city by measuring lead isotopes/lead concentrations of ambient air and potential sources in an industrial area and residential areas according to relative distance. The quality control program obtained during the measurement procedure for lead isotopes and concentrations exhibited $0.5ng/m^3$ for method detection limit, more than 90% for recoveries of standard particulate matters, and lower than 0.2% for reproducibility errors of four lead isotopes ($^{204}Pb$, $^{206}Pb$, $^{207}Pb$, $^{208}Pb$). For all three lead isotope ratios ($^{206}Pb/^{204}Pb$, $^{207}Pb/^{206}Pb$, $^{208}Pb/^{206}Pb$), the ratios were obtained in the industrial area were closer to nearby residential area than those of a residential area far away from the industrial area, thereby suggesting that lead sources were more similar each other in the industrial and nearby residential area. Furthermore, for both summer and winter seasons ambient lead concentrations were more than four times higher in the industrial area than in the residential areas and in turn, they were higher in the nearby residential area compared with the far-away residential area. As a result, it was suggested that lead emitted from the industrial area would influence more the ambient lead in the nearby residential area than the far-away residential area. Both slag and traffic emissions are likely to be major lead sources in the industrial and nearby residential areas, since their three lead isotope ratios ($^{206}Pb/^{204}Pb$, $^{207}Pb/^{206}Pb$, $^{208}Pb/^{206}Pb$) were similar to the ratios obtained from ambient air of these two areas. In addition, the lead isotope ratios revealed different pattern between seasons, and the ambient lead concentrations were higher for winter than for summer.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.2
• /
• pp.1-7
• /
• 2022

The purpose of this study is to discuss the impact of unmanned aerial vehicle service and how to activate it. The discussion on the impact of the introduction of the unmanned aerial vehicle service was examined in terms of economic, environmental, and social acceptance, and a plan to revitalize the industry was presented. In terms of economic impact, if transportation services are increased using unmanned aerial vehicles in the future, road-based transportation cargo may decrease and road movement speed may increase due to reduced road congestion. This can have a positive effect on the increase in the value of land or real estate assets, and it also provides an impact on smart city design. In terms of environmental impact, unmanned aerial vehicles (UAVs) generally move through electricity, so they emit less exhaust gas compared to other existing devices, such as vehicles and railroads, and thus have less environmental impact. However, noise can have a negative impact on the habitat in the presence of wild animals along their migration routes. In terms of social acceptability of unmanned aerial vehicles (UAV) technology, areas that are declining due to the emergence of new services may appear, and at the same time, organizations that create profits may appear, causing conflicts between industries. Therefore, it is essential to form a social consensus on the acceptance of emerging industries. The government should come up with various countermeasures to minimize the negative impact that reflects the characteristics of the unmanned aerial vehicle use service. Just as various systems such as road signs were introduced so that vehicles can be operated on the ground to secure air routes in the mid- to long-term for revitalization of unmanned-based industries, development and establishment of services that should be introduced and applied prior to constructing air routes I need this. In addition, the design and implementation of information collection and operation plans for unmanned air traffic management in Korea and a plan to secure a control system for each region should also be made. This study can contribute to providing ideas for mid- to long-term research on new areas with the development of the unmanned aerial vehicle industry.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.2
• /
• pp.193-215
• /
• 2022

Recently, ground structures have reached saturation, and underground construction using underground structures such as tunnels has been in the spotlight as a way to solve increasing traffic difficulties and environmental problems. However, due to the increasing number of underground structures, close construction is inevitable for continuous underground development. When a new underground structure is constructed closely, stability may become weak due to the influence on the existing tunnel, which may cause collapse. Therefore, analyzing the stability of existing tunnels due to new structures is an essential consideration. In this study, the effect of excavating new tunnels under parallel tunnels on existing parallel tunnels was analyzed using numerical analysis. Using the Displacement Control Model (DCM), the volume loss generated during construction was simulated into three case (0.5%, 1.0%, and 1.5%). Based on the center of the pillar, the distance where the new tunnel is located was set to 5 m, 6 m, 7 m, 8 m, 9 m, and the space for each distance were set to 5 (0D₁, 0.37D₁, 0.75D₁, 1.13D₁, 1.5D₁). In general, as the volume loss increased and the distance approached, the maximum displacement and angular displacement increased, and the strength/stress ratio to evaluate the stability of the pillar also decreased. As a result, when the distance between the new tunnel and the center of the pillar is 5 m, the space is 0D₁, and the volume loss is 1.5%, the stability of the existing parallel tunnel is the weakest.

• Journal of KIISE:Databases
• /
• v.31 no.5
• /
• pp.492-504
• /
• 2004

Recently, as growing of interest for LBS(location-based services) techniques, lots of works on moving objects that continuously change their information over time, have been performed briskly. Also, researches for NN(nearest neighbor) query which has often been used in LBS, are progressed variously However, the results of conventional NN Query processing techniques may be invalidated as the query and data objects move. Therefore, they are usually meaningless in moving object management system such as LBS. To solve these problems, in this paper we propose a new nearest neighbor query processing technique, called CTNN, which is possible to meet accurate and continuous query processing for moving objects. Our techniques include an Approximate CTNN(ACTNN) technique, which has quick response time, and an Exact CTNN(ECTNN) technique, which makes it possible to search nearest neighbor objects accurately. In order to evaluate the proposed techniques, we experimented with various datasets. Experimental results showed that the ECTNN technique has high accuracy, but has a little low performance for response time. Also the ACTNN technique has low accuracy comparing with the ECTNN, but has quick response time The proposed techniques can be applied to navigation system, traffic control system, distribution information system, etc., and specially are most suitable when both data and query are moving objects and when we already know their trajectory.