• Conservation Science in Museum
• /
• v.24
• /
• pp.117-132
• /
• 2020

The painting layer of Payathonzu temple mural paintings in the ruins of Bagan Myanmar has been damaged due to various reasons. In this study, the applicability of Neem resin, a traditional Myanmar adhesive, as a fixative on the painting layer was examined. Cow glue and Paraloid B-72 were selected as fixatives in the comparison group, and pseudo-specimens with conditions similar to the original mural paintings were produced to examine the changes before and after applying the fixatives and according to the deterioration experiments. As a result of conducting the experiments and comparing the fixatives, it was found that changes on the surface such as smudge, yellowing and gloss are greater with the application of higher concentration of Neem resin than with other fixatives. However, such changes were relatively small under the condition of 4% concentration. It was also confirmed that chromaticity and glossiness vary greatly between before- and after-application of the fixatives but that such discrepancies tend to decrease at 4% concentration compared to other concentrations. As for fixation strength, it was found that the fixation capacity of Neem resin on the base and painting layers is overall higher than other fixatives as the concentration is increased. Therefore, the applicability of 4% concentration of Neem resin as a fixative on the painting layer was confirmed considering the low surface changes according to environmental factors, low color discrepancy and glossiness, and characteristics of excellent fixation strength. It is believed that the findings of this study could be used as basic data for the preservation of Payathonzu temple mural paintings in the future.

• The Journal of the Korea Contents Association
• /
• v.8 no.12
• /
• pp.10-19
• /
• 2008

In this paper, we propose an automated silhouette extraction method that can effectively extract inner-patterns and silhouettes from 3D scan data of cultural asset. First of all, after creating the edge list of 3D vector data, we decide contour edge and crease edge according to viewpoint. In the next step, after extracting surface silhouette by investigating the vector variation of adjacent faces in crease edge, we finally extract the contour silhouette and surface silhouette for generating the blueprint of cultural asset. To evaluate the performance of the proposed silhouette extraction method, we performed experiments of silhouette extraction using a traditional tile model, a car model and a stone monument model. Comparing with the conventional threshold-based silhouette extraction method, the proposed method extracted more distinct and clear surface silhouettes and inner-patterns by effectively removing meaningless edges, such as noise.

• Geotechnical Engineering
• /
• v.13 no.6
• /
• pp.45-60
• /
• 1997

In this research the behavior of a new type of a single pile under lateral loading and against slope sliding is studied. Especially, the section of a new pile is determined throughout experiments, and the single pile behavior under lateral loading and the effect of improvement in slope stability by using new type of pile (gear-shaped) were studied. As a result, it is known that maximum deflection of gear-shaped pile is far smaller than that of traditional PC circular pile for the same lateral loading. And lateral load of gear-shaped pile at allowable deflection was bigger than that of PC circular pile. From the comparison between two hypes of piles, it can be seen that the degree of improvement of safety factor in slope was higher in gear-shaped pile than that of PC pile under the same condition, and it results in the reduction of the number of stabilizing piles in a slope.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.5
• /
• pp.611-617
• /
• 2010

A complex system involves a large number of design variables, and its operation is non-linear. To explore the characteristics in its design space, a Kriging meta-model can be utilized; this model has replaced expensive computational analysis that was performed in traditional parametric design optimization. In this study, a Kriging meta-model with a computational orthogonal array for the design of experiments was developed to optimize the fatigue life of a turbine blade whose behavior under cyclic rotational loads is significantly non-linear. The results not only show that the maximum fatigue life is improved but also indicate that the accuracy of computational analysis is achieved. In addition, the robustness of the results obtained by six-sigma optimization can be verified by comparison with the results obtained by performing Monte Carlo simulations.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.21 no.1
• /
• pp.62-69
• /
• 2007

To evaluate effect of CYTG on inhibiting the occurrence of arthritis, we performed the experiments including production of inflammatory cytokine and immunoglobulin in collagen arthritis model. The results were obtained as fellows. CYTG group showed inhibitory effect on arthritis incidence than control group for four weeks. Arthritis index of CYTG group reduced compared with control group. In CYTG group, production of cytokines which show suppressive effect on inflammation(IL-2, COX-2) was increased and which promotes inflammation(IL-10) was decreases in spleen. In CYTG group, production of immunoglobulin (IgG-RF) was reduced compared with control, and rate of CD3+CD69+T cell is lower in lymph node and CD4+CD25+ T cell is higher in lymph node and spleen. And synovial infiltration in the knee were observed in the controls (PBS-treated mice), whereas CYTG-treated mice exhibited significantly reduced histologic evidence of destruction and inflammation. So, the histopathological scoring average of CYTG group was 2.5 compared with control group(CIA mice) 4.5. It was thought that our data express high effect via immune system specially through the controling the inflammatory cytokines and immunoglobulins. CYTG could be usefully applied for the prevention and treatment of RA, and also is expected to be clinically helpful on the treatment of RA through modification.

• Smart Structures and Systems
• /
• v.9 no.3
• /
• pp.207-230
• /
• 2012

Full-scale shake table seismic experiments and low-amplitude vibration tests on a masonry building are carried out to assess its seismic performance as well as study the effectiveness of a new multifunctional textile material for retrofitting masonry structures against earthquakes. The un-reinforced and the retrofitted with glass fiber reinforced polymer (GFRP) strips masonry building was subjected to a series of earthquake excitations of increasing magnitude in order to progressively induce various small, moderate and severe levels of damage to the masonry walls. The performance of the original and retrofitted building states is evaluated. Changes in the dynamic characteristics (lowest four modal frequencies and damping ratios) of the building are used to assess and quantify the damage states of the masonry walls. For this, the dynamic modal characteristics of the structure states after each earthquake event were estimated by performing low-amplitude impulse hammer and sine-sweep forced vibration tests. Comparisons between the modal results calculated using traditional accelerometers and those using Fiber Bragg Grating (FBG) sensors embedded in the reinforcing textile were carried on to investigate the reliability and accuracy of FBG sensors in tracking the dynamic behaviour of the building. The retrofitting actions restored the stiffness characteristics of the reinforced masonry structure to the levels of the original undamaged un-reinforced structure. The results show that despite a similar dynamic behavior identified, corresponding to reduction of the modal frequencies, the un-reinforced masonry building was severely damaged, while the reinforced masonry building was able to withstand, without visual damage, the induced strong seismic excitations. The applied GFRP reinforcement architecture for one storey buildings was experimentally proven reliable for the most severe earthquake accelerations. It was easily placed in a short time and it is a cost effective solution (covering only 20% of the external wall surfaces) when compared to the cost for full wall coverage by GFRPs.

• KIPS Transactions on Computer and Communication Systems
• /
• v.4 no.9
• /
• pp.307-314
• /
• 2015

Recently, market trends of auxiliary storage device HDD and SSD are interchangeable. In the future, the SSD is expected to be used more popular than HDD as an auxiliary storage device. The TRIM command technique has been proposed and used effectively due to the development of the SSD. The TRIM command techniques can be used to solve the problem of Freezing SSD that operating system cooperates with the SSD. The TRIM command techniques are performed in the idle time of the internal SSD that are actually deleted when a user deletes the data. However, in the point of view of computer forensics, the digital crime is increasing year by year due to lack of data recovery. Thus, this rate of arrest is insufficient. In this paper, I propose a solution that selectively manages data to delete based on advantage of the stability and the write speed of the TRIM command. Through experiments, It is verified by measuring the performance of the traditional method and selected method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.1
• /
• pp.17-28
• /
• 2014

The increase of smartphone users have made mobile carriers offload increasingly congested traffic of 3/4G by providing Wi-Fi hot-spots in the public places such as coffee shops and subway stations. In the traditional authentication in WLAN, the users should convince the service providers that they are valid customers before they use WLAN services. Since the authentication protocol is designed for service providers. Even with the mutual authentication based on the IEEE 802.1X, which is supported by IEEE 802.11 standard, it is difficult to be convinced of that the service providers really have installed the WLAN APs, which users are confronted with. An attacker can install rogue APs that masquerade as legitimate APs by copying the SSID, MAC address, etc. in order to obtain users' private information. In this paper, we introduce a method of authenticating legitimate APs for smartphone users. And we show our proposal can be well utilized for the current Wi-Fi hot-spots as a security plug-in and prove it through our experiments.

• Journal of the Korean Chemical Society
• /
• v.48 no.4
• /
• pp.339-350
• /
• 2004

The simplified cumulant method was applied to diffraction data of $CClF_3$ to study the equilibrium molecular parameters over a range of temperatures. The molecular parameters of $CClF_3$ by the simplified cumulant method were compared with those from the traditional method. Also the instrumentation of picosecond time resolved electron diffraction (TRED) and the experimental details are described. The total experimental temporal resolution was discussed in terms of the electron pulse width. The TRED system was applied to study the molecular structures for $CClF_3$ at room temperature. The molecular structural parameters $CClF_3$ from TRED are compared with those from GED/RT. The molecular parameters ($r_e$)of bonded C-F and C-Cl for $CClF_3$ by simplified CA are 132.00(2) pm and 175.20(3) pm, respectively, by using GED/RT. From the results of TRED experiments $r_a$ for bonded C-F and C-Cl are 132.23(13) pm and 177.23(19) pm.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.8
• /
• pp.695-702
• /
• 2002

The question how man can perceive the direction of a sound is one of the traditional psychoacoustical problems. Rayleigh already began to investigate this subject in 1870s and kept on interesting himself intermittently throughout his research career. Rayleigh was only concerned with this subject among those of perception of sound and focused more interest on it than any other acoustical problems. At first he insisted on the perception of the direction of a sound by the difference of intensity of a sound in two ears. but was phased in accepting that by the difference of phase of a sound there. Thus he arrived at the modern view that the perception of the sound direction is caused by the difference of intensity in high frequencies and the difference of phase in low frequencies. Rayleigh presented his ability as an excellent experimenter by employing very cautious and ingenious experimental settings and acquired persuasive results by linking the consequences of his mathematical theorization with his experiments.