• Journal of the Korean Society of International Agriculture
• /
• v.31 no.1
• /
• pp.8-16
• /
• 2019

Alternatives for increasing the competitiveness of locally manufactured agricultural machinery in domestic and foreign markets has been proposed. This was done by analyzing the major agricultural machinery's price and market share as well as their performance and quality. In the Korean domestic market, the market share of Japanese agricultural machinery has been identified to be 14.5% for tractors, 31.1% for combine harvesters, and 35.8% for rice transplanters, and on track for further increase. Japanese manufacturers' domestic patent shares are 58.5% for tractors, 79.9% for combine harvesters, and 69.8% for rice transplanters, showing the dire need for Korean domestic firms to expand their technological rights. To strengthen the industrial competitiveness of agricultural machinery, therefore, researches that develop the fundamental and elemental technology to reduce the frequency of breakdown should be needed in the short term. To achieve this, it is imperative to establish technology roadmap, promote greater cooperation between academia and industry, and systematically increase research funding. In addition, as a long-term solution for enhancing the competitiveness, an establishment of Agricultural Equipment Technology Institute is strongly recommended to systematically support R&D for developing core technologies, particularly high-quality components that guarantee durability and quality.

• Transactions of the KSME C: Technology and Education
• /
• v.3 no.2
• /
• pp.83-88
• /
• 2015

Agricultural tractors are utilized on rough road such as rice paddy field. Therefore, static and dynamic load should be considered when simulating structural analysis with finite element analysis (FEA). But it consumes a lot of time and effort to measure dynamic load because of difficulty and complexity in modeling various field working load conditions and kinematics of machinery. In this paper, to reduce the efforts, 4-post road simulator is developed for agricultural tractor like modeling commercial vehicle. In proving ground test in our facility, I measured acceleration of front/rare axle and strain of body frame to validate input loads. The acceleration is used for defining input loads. And strain is validated with dynamics analysis including mode superposition method. As a result, I was able to calculate 4-post input road profiles, which represent similar proving ground profile with good reliability.

• Korean Journal of Agricultural Science
• /
• v.43 no.4
• /
• pp.650-655
• /
• 2016

Gears are components of transmission which transmit the power of an engine to a machine and offer numerous speed ratios, a compact structure, and high efficiency of power transmission. Gear train design in the automotive industry uses simulation software. However, PTO (Power Take-Off) gear design for agricultural applications uses the empirical method because of the wide range of load fluctuations in agricultural fields. The PTO is an important part of agricultural tractors which transmits the power to various tractor implements. Therefore, a simulation was essential to the optimal design of the PTO. When the PTO gear is optimally designed, there are many advantages such as low cost, reduced size, and light weight. In this study, we conducted the bending and contact safety factor simulation for the PTO gear of an agricultural tractor. The bending and contact safety factors were calculated on ISO 6336 : 2006 by decreasing the face widths of the PTO pinion and wheel gear from 18 mm at an interval of 1 mm. The safety factor of the PTO gear decreased as the face width decreased. The contact safety factors of the pinion and wheel gear were 1.45 and 1.53, respectively, when the face width was 18 mm. The simulation results showed that the face width of the PTO gear should be greater than 9 mm to maintain the bending and contact safety factors higher than 1. It would be possible to reduce the weight of the PTO gear for different uses and working conditions. This study suggests that the possibility of designing an optimal PTO gear decreases as its face width decreases.

• Journal of Environmental Health Sciences
• /
• v.43 no.1
• /
• pp.42-54
• /
• 2017

Objectives: The present study was conducted to investigate farm work environments among farmers and examine the level of management of safety and health, and to subsequently produce study result to serve as foundational data for the development of guidelines on safety and health as part of the improvement of farming work environments among farmers raising Korean native cattle. Methods: The present study conducted a survey on farm work environments and the management of safety and health with 407 farmers engaged in Korean native cattle farming in selected regions in eight provinces. It also visited 10 farmers to verify the current status of farm work. Results: The survey results showed that 16.4% of the respondents experienced safety-related accidents due to farm work. The locations of the accidents were inside the cattle shed (71.4%) and facilities outside the cattle shed (19.6%). The types of accident showed collision with animals (35.7%), collision or contact with obstacles (27.1%), and musculoskeletal accidents due to heavy object handling (12.9%). The causes of the accidents were cattle (38.3%), cultivators and tractors (25.4%), facility tools in cattle sheds (9.0%), and slippery floors (6.0%). The damaged areas were hand (21.0%), spine (19.8%), lower limb (18.5%), and foot (17.3%). A self-diagnostic survey on respiratory diseases showed that 11.5% of the respondents experienced respiratory-related symptoms. The survey on safety and health during farm work showed that wearing personal protective equipment and response to emergency situations, which were needed to prevent safety-related accidents, were relatively low compared to the level of recognition of the need and awareness of safety issues. Furthermore, the field survey identified the current status of safety and health issues such as prevention management of collision accidents with cattle, how to handle heavy objects, and wearing of personal protective equipment. Conclusions: The present study identified safety-related accidents and problems in the management of safety and health among Korean native cattle farmers. In order to address the problem, it is necessary to not only provide guidelines on safety and health management which are appropriate to the characteristics of Korean native cattle farming work, but also to study the development of personal protective equipment.

• Current Research on Agriculture and Life Sciences
• /
• v.8
• /
• pp.107-113
• /
• 1990

This study was attempted to develop a remote controllable speed sprayer in order to protect an operator from agricultural chemicals. For the purpose of remote controllable transmission was developed by using one chip microcomputer. The following results could be summarized in this study. 1. Remote controllable transmission developed had not made even a single mistake during the test performed 100 times repeat. Thus, it could that this machine was very accurate. 2. One chip microcomputer was made by machine language and its was with in 3 sec's which was the same as human did. 3. One chip microcomputer which was used in the experiment could be widely used to automation of agricultural machinery, since it is smaller and chiper than any other similar ones such as personal computer, lap tap, one board computer. 4. Since, farm tractor has the same type of transmission as this system, it also could be adapted to farm tractors. 5. In this experiment, transmission lever was remote controll were designed to operate simultaneously. Thus, this system developed was more complicate than conventional system. However, by removing this transmission lever and by mounting the remote controll system at the speed sprayer, it would be higher and easier to handle than the conventional one.

• Journal of Korea Port Economic Association
• /
• v.36 no.3
• /
• pp.21-38
• /
• 2020

Currently, in-port emissions are a serious problem in port cities. However, emissions, especially non-greenhouse gases, from the operation of cargo handling equipment (CHE) have received significant attention from scientific circles. This study estimates the amount of emissions from on-land port diesel-powered CHE in the Port of Incheon. With real-time activity data provided by handling equipment operating companies, this research applies an activity-based approach to capture an up-to-date and reliable diesel-powered CHE emissions inventory during 2017. As a result, 105.6 tons of carbon monoxide (CO), 243.2 tons of nitrogen oxide (NOx), 0.005 tons of sulfur oxide (Sox), 22.8 tons of particulate matter (PM), 26.0 tons of volatile organic compounds (VOCs), and 0.2 tons of ammonia (NH3) were released from the landside CHE operation. CO and NOx emissions are the two primary air pollutants from the CHE operation in the Port of Incheon, contributing 87.71% of the total amount of emissions. Cranes, forklifts, tractors, and loaders are the four major sources of pollution in the Port of Incheon, contributing 84.79% of the total in-port CHE emissions. Backward diesel-powered machines equipped in these CHE are identified as a key cause of pollution. Therefore, this estimation emphasizes the significant contribution of diesel CHE to port air pollution and suggests the following green policies should be applied: (1) replacement of old diesel powered CHE by new liquefied natural gas and electric equipment; (2) the use of NOx reduction after-treatment technologies, such as selective catalytic reduction in local ports. In addition, a systematic official national emission inventory preparation method and consecutive annual in-port CHE emission inventories are recommended to compare and evaluate the effectiveness of green policies conducted in the future.

• Journal of Drive and Control
• /
• v.17 no.4
• /
• pp.133-140
• /
• 2020

Traction performance of a tractor varies depending on soil conditions. Sinkage and slip of the driving wheel for tractor frequently occur in a reclaimed land. The objective of this study was to develop a tractor suitable for a reclaimed land. Traction performance was evaluated according to soil conditions of reclaimed land and paddy field. Field experiments were conducted at two test sites (Fields A: paddy field; and Field B: reclaimed land). The tractor load measurement system was composed of an axle rotation speed sensor, a torque meter, a six-component load cell, GPS, and a DAQ (Data Acquisition System). Soil properties including soil texture, water content, cone index, and electrical conductivity (EC) were measured. Referring to previous researches, the tractor traveling speed was set to B3 (7.05 km/h), which was frequently used in ridge plow tillage. Soil moisture contents were 33.2% and 48.6% in fields A and B, respectively. Cone index was 2.1 times higher in field A than in field B. When working in the reclaimed land, slip ratios were about 10.5% and 33.1% for fields A and B, respectively. The engine load was used almost 100% of all tractors under the two field conditions. Traction powers were 31.9 kW and 24.2 kW for fields A and B, respectively. Tractive efficiencies were 83.3% and 54.4% for fields A and B, respectively. As soil moisture increased by 16.4%, the tractive efficiency was lowered by about 28.9%. Traction performance of tractor was significantly different according to soil conditions of fields A and B. Therefore, it is necessary to improve the traction performance of tractor for smooth operations in all soil conditions including a reclaimed land by reflecting data of this study.

• Journal of Korea Port Economic Association
• /
• v.37 no.4
• /
• pp.33-40
• /
• 2021

Currently, the shipping and port industries are implementing strategies to improve port processing capabilities through the expansion and efficient operation of port logistics resources to survive fierce competition with rapidly changing trends. The calculation of the port's processing capacity is determined by the loading and unloading equipment installed at the dock, and the port's processing capacity can be improved through various methods, such as additional deployment of logistics resources or efficient operation of resources in use. However, it is difficult to expect an improvement effect in a short period of time because the additional deployment of logistics resources is clearly limited in time is clear. Therefore, it is a feasible way to find an efficient operation method for resources being used to improve processing capacity. Domestic ports are also actively promoting informatization and digitalization with the development of the 4th industrial revolution technology. However, the calculation of the number of Y/T (Yard Tractor) assignments in the current unloading process depends on expert experience, and related previous studies also focus on the allocations of Y/T or Calculation of the total number of Y/T required. Therefore, this study analyzed the factors affecting the number of Y/T allocations using the loading and unloading information of incoming ships, and based on this, cluster analysis, regression analysis, and deep neural network(DNN) model were used.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.15 no.5
• /
• pp.349-359
• /
• 2022

The aim of this study is to analyze the dynamic characteristics of proportional control valves according to various working conditions as a basic study for developing proportional control valves for auto-steering tractors. The dynamic characteristics of proportional valves were measured using hydraulic characteristics measurement system, and the power was analyzed using measured flow rate and pressure data. As the experimental conditions, the tractor engine speed and steering angle was selected as the main variables, and the experiment was performed on urethane road conditions. As a result, it was found that the flow rate, pressure, and power of the proportional control valve increased as the tractor engine speed and steering angle increased. In particular, as the steering angle increased at the same engine speed, the flow rate, pressure, and power tended to increase by up to 190%, 172%, and 273%, respectively. Similarly, as the engine speed increased at the same steering angle, the flow rate, pressure, and power tended to increase up to 161%, 122%, and 168%, respectively. Therefore, it can be seen that the steering angle has a higher influence on the dynamic characteristics of the proportional control valve than the engine speed.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.2
• /
• pp.243-249
• /
• 1996

To formalize the mechanization technique so as to build up competitiveness on the international market, a detail survey of a 104ha size rice farm, was made. And calculated to find out how many machine of each calibre are needed. It was found that he needed : 3 farm tractors, 3 combines, 4 grain dryers, 1 speed sprayer, 100 man days of labor for sowing, application of fertilizer and herbicide, respectively. And also needed 150 man days for combine harvesting and 60 man days for disease and pest control. It was found also that well timed harvesting is critically needed to keep rice quality. Because, in case when harvesting machine was beakdown to make harvesting time extended, then the quality drops down very much and also the farm income fall very much. Therefore, it is recommended that the amount of machine needed should be prepared and they should be well maintained so that harvest be completed in time.